BITACORA DEL TALLER:

Personas que han cursado el Taller en los ultimos meses, temporada marzo- julio del 2009 /Agosto-Noviembre 2009.

01.- Leslie/Instituto Politecino Nacional.

Comentario: “Yo decidí tomar un curso de Archicad e illustrator, realmente si aprendí del curso, le agradezco al Teacher por ayudarme en mi proyecto. Aprendí al mismo tiempo que desarrolle mi proyecto para concurso (Hotel Bioclimático) y me parece que vale mucho la pena tomar el Taller”

02.- Jimera Arias/Instituto Politécnico Nacional.

Comentario: “YO TOME UN CURSO DE ARCHICAD 11.0 E ILLUSTRATOR CS3 PARA DESARROLLAR UN PROYECTO DE CONCURSO (HOTEL BIOCLIMATICO) MI RESULTADO FUE MUY BUENO “RECOMIENDO TOTALMENTE EL CURSO ESTA MUY COMPLETO Y ME GUSTO MUCHO”.

03.- Ulises Ruiz/Instituto Politécnico Nacional.

Cursando 6º clase Photoshop+3D Max+V-Ray

04.- Sergio Corestein/Universidad Anahúac.

Curso Autocad+ Photoshop

05.- Jeronimo Monroy/UNAM.

Cursando 3º clase Autocad+ Photoshop

06.- Jorge Leyva/UNAM.

Comentario: ”Despues de haber tomado en Taller de Laminas estoy pensando en tomar ahora el de 3D Max + VRay”

07.- Luis Arana/Instituto Politécnico Nacional.

Cursando 5º clase Photoshop+3D Max+V-Ray.

08.- Felix Paez/ Egresada UAM.

Cursando Cursando 3º clase Photoshop+3D Max+V-Ray.

09.- Arq. Luis Lazo/Docente actualizandose del Instituto Politécnico Nacional.

Curso Taller de Modelado en SketchUp.

Comentario: ”Es muy necesario actualizarse hoy en día, mas siendo docente”

TAGS

Etiquetado Adobde CS3, Archicad 11.0,Archicad 12.0, Autocad, CS3, Curso laminas de presentacion, Cursos, Cursos arquitectos,Cursos de Illustrator, Cursos en la ciudad de mexico, Cursos en la colonia roma,Estudiantes de arquitectura, impartido a estudiantes de arquitectura, Mexico df, Taller de Laminas de Presentación Arquitectónica, alumnos de la UNAM, ESIA IPN/POLITECNICO, Anahuac, Universidad del Valle de México, etc…, Laminas para concurso, concurso de arquitectura, anteproyecto, Arquitecto, Adobde CS3, Archicad 11.0,Archicad 12.0,Arquitecto,Autocad,concurso, concursos, CS3, Curso, Curso laminas de presentacion, Cursos, Cursos arquitectos,Cursos de Illustrator, Cursos en la ciudad de mexico, Cursos en la colonia roma, cursos sabatinos,Estudiantes de arquitectura,impartido a estudiantes de arquitectura, laminas de concurso, Mexico df, Photoshop,sabatinos, taller,Taller de Diseño de Laminas de Presentacion, Taller de Laminas de Presentación Arquitectónica

Autocad tıpkı ms ofis yazılımları gibi visual basic destekli olarak makro oluşturmaya olanak sağlamaktadır. Bu sayede çizimlerinizde belirli periyotlar ile yaptığınız işleri otomatik olarak autocad e çizdirebilirsiniz. Üstelik bunu yapmak için visual basic e ihtiyacınız yok. Autocad zaten kısıtlı bir visual basic uygulaması ile geliyor. İleriki günlerde sizinle bu konu ile ilgili örnek çalışmalar paylaşacağım.

Parlando con i clienti in negozio mi rendo conto ogni giorno di più di quanto la gente sia male informata riguardo al parco software a disposizione per ogni tipo di piattaforma, sia essa Linux, Windows o Mac OS. In particolar modo molti mi domandano se nel tal computer è già presente Office o se devono acquistarlo a parte, se c’è “il Norton” già installato e dubbi vari di designer e ingegneri riguardo al passaggio a Mac vista la mancanza di una versione di AutoCad compatibile con i computer Apple. Su quest’ultimo argomento ci terrei a precisare una cosa: è vero, Autodesk si ostina (inspiegabilmente e paradossalmente) a non produrre una versione di Cad nativa per Mac OS, rendendo di fatto necessaria l’installazione tramite Boot Camp, Parallels o VMWare Fusion di una copia di Windows. Proprio da questo problema partirò per spiegare meglio il titolo del post: non esiste solo AutoCad. Come non esiste solo Office e neanche soltanto Norton. Ci sono invece moltissime alternative ai programmi più noti, magari meno pubblicizzati ma aventi le stesse funzioni e potenzialità. Riguardo alla modellazione 3D ecco quindi VectorWorks e ArchiCad, al posto di Office si può usare OpenOffice (per tutti i sistemi operativi e pure gratis), e per l’antivirus ci sono pure AVG, Avast! e Kaspersky. Ovviamente tutti sono liberissimi di scegliersi il software che vogliono, ma troppo spesso ho visto persone preferire un computer ad un altro (migliore) perchè spaventati dal dover “per forza” spendere quasi 200 euro per le licenze che nessun produttore di pc regala mai. Quindi spendo meno per il computer e con quello che rimane mi compro Office. Quando faccio notare che esistono (valide) alternative, molti non vogliono neanche provare ad usare qualcosa di diverso, perchè ormai Word lo conoscono e il Norton “è pesante però è il migliore”. Non inizierò una discussione su cosa è meglio e cosa è peggio, non è questo il tema. Ma se tutti provassimo ad aprire gli occhi senza aver timore del “mondo dei software nascosti” e meno conosciuti, senza dubbio staremmo, almeno dal punto di vista della produttività, molto ma molto meglio.

Sinhala magazine

Mais eBooks para a arte de “desenhar” em AutoCAD. Bons downloads!

Mastering AutoCad 2008 - George Himura(English).pdf

Mirrors: MegaUpload || 4shared

Lembrando que os links para download se encontram na página “eBooks”  acima, assim como atualização de novas fontes. Não esqueçam de sempre acessar o blog.

PS: Qualquer problema nos links, favor informar via comentário.

Aqui a cultura tem vez!

Vannak olyan esetek mikor eléggé összefolynak már a dolgok. Ma ezt átéltem munka közben. Egy papírra nyomtatott, de még régi tervrajzra kézzel berajzolt plusz érzékelőket kellett a régiek vezetékével mindennel együtt átrajzolnom gépre.

A gépen viszont az újonnan átépített tervrajz van csak meg. Vagyis a két alaprajz között kifejezetten nagy eltérések vannak. Ráadásul berajzoltam a régi rendszert és azt kezdtem el kibővíteni, de aki kézzel felírta a dolgokat az 1-2 helyen elbaszarintotta a számozást és sok esetben az sem tiszta, hogy a nyomvonal merre megy.

Az már nem is meglepetés, hogy az új tervrajz sem mindig egyértelmű. Én meg szívom a fogam és közben prbálom a dolgokat összepasszintani. Ma a feléig jutottam el, de már elegem lett belőle. Hétfőre készen kell vele lennem. Fincsi lesz…

Saya menerima gambar skala 1:25 seperti ini:

Apabila gambar tersebut akan ditampilkan dalam skala yang lebih kecil misalnya 1:50 atau 1:100, seharusnya ukuran untuk text diubah menjadi lebih besar agar text masih bisa dibaca. Atau ada beberapa text yang tidak perlu ditampilkan pada skala tertentu.

Sejak Autocad 2008, ada fasilitas annotation yang dapat digunakan untuk melakukan hal tersebut.

Sesuai yang tertulis di help autocad, object yang bisa dijadikan object annotation adalah:

Hatches
Text (single-line and multiline)
Tables
Dimensions
Tolerances
Leaders and multileaders
Blocks
Attributes

Gambar di atas yang akan dicoba untuk dibuat annotative object adalah nomer 1 (dimension), 2 (leaders) , 3 (attributes) dan 4 beberapa text.

1. Merubah menjadi annotative object dan menentukan tingkatan skala.

Memilih object dimensions dan merubah menjadi annotative object. Pada command prompt ketik. Tentunya yang didalam kurung tidak perlu ditulis.

command:qselect <enter> 

Isikan pada kotak dialog ‘Quick Select’

kemudian click OK

tekan Ctrl+1, jika setting object properties seperti di samping belum muncul

Set pilihan di properties

Ulangi langkah ‘qselect’ untuk ‘Object Type’= ‘Leader’ dan ‘Text’

Untuk merubah block attribute menjadi annotative object, pada command prompt ketik block, kemudian pilih block yang akan dijadikan annotative, pada behavior, click annotative.

Gerakkan mouse ke object yang sudah dirubah. Jika ada icon , symbol seperti bintang kaki tiga, maka object tersebut sudah berubah menjadi annotative objects.

Merubah informasi block attribute agar berubah sesuai dengan skala yang aktif

Informasi skala akan berubah sesuai dengan setting skala yang aktif. Ikuti langkah berikut:

command: attedit <enter>

<pilih block attribute>

disebelah tulisan “SKALA” click kanan, kemudian pilih ‘Insert Field…’

Pada kotak field, set sebagai berikut:

2. Merubah skala gambar

Pada program autocad di kanan bawah terdapat tool bar dengan 3 icon yang berhubungan dengan object annotation yaitu :

Pada gambar di atas icon nomer 2 dan 3 dalam status aktif.

Click icon nomer 1, pada kondisi icon nomer 2 dan 3 aktif, kemudian pilih skala 1:50.

Terlihat bahwa dimensions, attribute dan text menjadi lebih besar (ter-skala) sesuai dengan perubahan skala gambar.

Jika informasi skala di block attribute tidak berubah, ketik regen di command line.

Silahkan click icon 1 untuk mencoba skala gambar yang lain

3. Mengeset skala di object annotative

Jika diinginkan untuk mengatur object annotative hanya ditampilkan dalam skala tertentu, misal hanya di skala 1:25 dan 1:50, maka urutannya adalah sebagai berikut.

Memilih object annotation scale.

Pada command line ketik

command: qselect <enter>

<pilih object type rotates dimension>

<masih dalam object terpilih, ketik>

command:  objectscale <enter>

<pada object scale list, diset hanya untuk 1:25 dan 1:50>

ulangi untuk object type : leader, text dan block attribute.

Pastikan bahwa icon 2 dan 3 pada posisi tidak aktif. Kemudian pilih skala 1:100, maka dimensi yang diset di skala 1:25 dan 1:50 tidak ditampilkan.

===selamat mencoba dan berlatih====

Bé, per ahí van diguent que els dibuixos de l’examen d’AutoCad seran algun d’aquestos:

practica_04, practica_06, practica_11, practica_13, practica_17, practica_16

Bona sort!!

Have you ever wanted to add your Company logo or even your signature to your dwg files without having to attach files?  This can seem like a long process but once you have the files and have done one, it gets much easier the next time around.

What you will need to download and install (in addition to Autocad)

GSview (Latest Version)

GhostScript8.70 (Need version 8.70 or newer to run on Windows7) GhostScript 8.64 (Windows XP )

PStoEdit (Latest Version)

Steps

1. Choose your Logo or Signature file (Preferably a jpeg/gif/tiff)

2. Goto the Vector Magic web site and scan in your image.

A. Create account to access additional save as file names

B. Save as .EPS file

3. Open GSView Program

A. Go to the EDIT Tab, then select Convert to vector format..

B. Once the dialog box opens, search and select the .EPS file you just created,

C. Under the Format, Choose Dxf: CAD exchanged format, then select Ok

D. In the Save as Dialog, choose where you want to save the file, name the file followed by .dxf

example: logo.dxf

4. Open Autocad

A. Open .dxf file then save as .dwg file

B.  Open the .dwg file, from there you can hatch line work, add colors and/or create blocks.

(Its good practice to copy and paste the content into your typical dwg files, that way you have all of your normal standards)

Mais um eBook de AutoCAD para os senhores, esse para nossos hermanos espanhóis, ou para os brasileiros que queiram treinar a língua latina! Bons downloads!!

Manual AutoCad 2009 2D - Antonio Lopez(Spanish).pdf

Mirrors: MegaUpload || 4shared

Lembrando que os links para download se encontram na página “eBooks”  acima, assim como atualização de novas fontes. Não esqueçam de sempre acessar o blog.

PS: Qualquer problema nos links, favor informar via comentário.

Aqui a cultura tem vez!

Menawarkan Jasa Pembuat gambar desain 3D menggunakan 3ds max, gambar 2D (layout/denah, tampak, potongan) menggunakan Autocad, silakan Hubungi email: yayan_sofyan_78 @yahoo.com

KEY CONCEPTS

• SETTING UP NEW DRAWINGS
• SETTING UNITS, SCALE, ETC.
• ORGANISING LAYERS
• USING TEMPLATES
• CREATING TEMPLATES

AIMS AND OBJECTIVES

• To gain an understanding of how set up AutoCAD before starting a drawing.

Previous lessons:

Introduction to AutoCAD – Part 1

Next Lesson:

• Using coordinate systems

Mais um eBook sobre AutoCAD para os senhores em inglês. Bom estudo!

AutoCAD 2009 and AutoCAD LT 2009 All-in-One Desk Reference For Dummies(English).pdf

Mirrors: MegaUpload || 4shared

Lembrando que os links para download se encontram na página “eBooks”  acima, assim como atualização de novas fontes. Não esqueçam de sempre acessar o blog.

PS: Qualquer problema nos links, favor informar via comentário.

Aqui a cultura tem vez!

Locuinte individuale

Esse é um eBook essencial para um engenheiro que se preze, bons downloads!

Guia Prático de AutoCad 2000 – Hugo Ferramacho(PT-BR).pdf

Mirrors: MegaUpload || 4shared

Lembrando que os links para download se encontram na página “eBooks”  acima, assim como atualização de novas fontes. Não esqueçam de sempre acessar o blog.

PS: Qualquer problema nos links, favor informar via comentário.

Aqui a cultura tem vez!

Today it’s been quite an intense day. A day to discover a new IT & CAD tool called VectorWorks on its 2010 version. It’s used in all kind of industries to draw and design both 2 and 3D, but we are working specifically with the Landscape and Garden Design version.

As I’ve got an Engineering background and some previous knowledge on AutoCAD, it does not seem so difficult to me but I have no doubt it will be tough and hard as well, knowing that always requires some time to adapt to the new tools and features of a new program to get the best of it.

To help on that point we are lucky to have Tamsin Slatter as an IT/CAD tutor. After 20 years working in the IT industry, she escaped and trained as a landscape designer but rapidly realised Vectorworks could be the designer tool of the future, so she started her own training company and specialised in introducing designers from all walks of life to the wonders of Vectorworks. She is author of the book “Residential Garden Design with Vectorworks Landmark” and participates in their customer quality program, testing new releases long before they hit the streets.

We will continue tomorrow with another session and then our Principal on the Course will test our knowledge during the Christmas holidays with all sort of homework to be presented at the beginning of next year.

Talking about homework, I’ve spent this short weekend preparing another of them. It’s called timeline and it’s a sort of compilation of pictures of every decade for the last 3 Centuries. Every one of these Centuries is divided at the same time in four main topics (Art, Architecture, Gardens & Socieconomy) so what we need to do is to find all sort of art expressions, buildings or constructions, gardens and parks and place them into a socioeconomic context, so we can understand better why society at that time used to do certain things and understand the evolution and progress of humanity through its acts and constructions.

I haven’t finished mines completely, but I place you here the Centuries I’ve got already, so you can try to guess the different pictures and photographies and when I receive some feedback on them I will post all 3 Centuries with its solutions, all right? Good luck!!

KEY CONCEPTS

• STARTING AUTOCAD
• DISPLAY NEW FILE WIZARD
• CHANGE WORKSPACE TO AUTOCAD CLASSIC
• UNDERSTANDING THE AUTOCAD INTERFACE
• TOOLBARS
• MENUS
• ACCESSING COMMANDS
• OPENING AND SAVING DRAWINGS
• EXIT AUTOCAD

AIMS AND OBJECTIVES

• To gain an understanding of how the AutoCAD interface operates

Next Lesson:

• Organising your drawing setup

On November 3,^, 2009 I had the opportunity to attend a one day meeting for industry analysts at Autodesk’s Manufacturing Industry Group headquarters in Lake Oswego, Oregon.

The themes for the meeting were loud and clear:

• With Autodesk’s 9 million users, and 1900 channel partners, the company offers global solutions and has enormous financial strength.
• Autodesk’s manufacturing group’s revenue comes, surprisingly enough, mostly from medium and large customers.
• With its recent technology acquisitions and their well thought out and executed integration into the product line, the manufacturing group now has a wide breadth of solutions for digital prototyping. These span the range from concept design through design and manufacturing.
• Different than many of its competitors, Autodesk likes to sell “boxed” products, not solutions and consulting to make more incomplete solutions work.
• During the meeting Autodesk broke down their manufacturing design automation into four major areas: digital concept creation (Alias), digital engineering (Inventor, AutoCAD), digital simulation (Inventor Simulation, Moldflow, Algor), and a new digital factory offering based on NavisWorks.
• An open environment, able to read from most many CAD vendors directly and most standards formats.
• Autodesk also stressed its technology leadership, focusing on Autodesk Fusion, direct model editing capability that “unites direct and parametric workflows,” better use of screen real estate, Showcase for amazing visualization, a factory offering, and the upcoming release of Inventor Publisher.

• We hope to soon spend some in-depth hands-on with Fusion and will let you know our opinion as to exactly how integrated the direct modeling and parametric workflows are. Some of our questions are exactly how much of the direct modeling changes are captured in the history tree and whether all direct changes can be captured. More in a future blog.

Carl Bass, the Autodesk CEO, spoke about how Autodesk caused and continues to cause “low end disruption” in the engineering and design marketplace because Autodesk shipments outstrips its competitors by wide margins. He expects such disruptions to continue in modeling and simulation. Bass also speculated on the possible impact of cloud computing, both to vendors and users. Business model changes will be needed to both, including pricing for the interactive and compute intensive portions.

Our conclusions

For engineering, Inventor is very well positioned, and offers terrific value for about $7K USD. So far, many of the Autodesk acquisitions have automatically been added to the Inventor Professional version at no additional charge. Industry leading positions are evident in sheet metal design, plastic part design and analysis, mold tooling, mechatronic control systems design tools, high value simulation (once Algor is fully integrated), and rules based design (with Intent and iLogic).

In digital concept design, Alias leads the way, especially in automotive and consumer design, and is well integrated with Inventor. Recently, Autodesk introduced the first CAD/design application for the iPhone – SketchBook Mobile, costing a mere $2.99.

In simulation, with its recent acquisitions of PlassoTech, Moldflow, and Algor, Autodesk aims to have its engineering customers engage earlier in the design process and appears well on its way to doing so. Algor’s former CEO, Teresa Anania, heads up this effort, knows the customers needs, and is aggressively moving these products into the mainstream.

For the factory, Autodesk brings together AutoCAD (widely used today for plant layout, Inventor for equipement and tooling design, Revit for facility design and BIM (building information management), and Navisworks for visualization and simulation. This offering is expected to challenge the price points of competitive offerings of Dassault Systemes’ Delmia and Siemens PLM Software’s Tecnomatix.

—

Tombol shortcut biasanya digunakan dalam AutoCad sebagai alternative dalam memasukkan perintah-perintah baku pada AutoCad. Tombol shortcut pada AutoCad jumlahnya sangat banyak, namun disini akan dijelaskan beberapa saja yang sering digunakan dalam aplikasinya.

• Ctrl + A berfungsi sama dengan perintah yang berfungsi untuk memilih semua objek (Select All).
• Ctrrl + B berfungsi untuk mengaktifkan atau menonaktifkan Snap (Snap on/off).
• Ctrl + C berfungsi untuk mencopy objek ke dalam Clipboard (Copy to Clipboard).
• Ctrl + shift + C berfungsi untuk melakukan copy menggunakan base point (Copy with base point).
• Ctrl + F berfungsi untuk mengaktifkan dan menonaktifkan Object Snap (Osnap on/off).
• Ctrl + G berfungsi untuk memunculkan atau menyembunyikan grid (Grid on/off).
• Ctrl + J berfungsi untuk menggantikan fungsi tombol enter.
• Ctrl + L berfungsi untuk mengaktifkan atau menonaktifkan Ortho (Ortho on/off).
• Ctrl + N berfungsi untuk membuka lembaran kerja baru AutoCad (sama dengan tombol New).
• Ctrl + O berfungsi untuk membuka kotak dialog Select File (sama dengan tombol Open atau untuk membuka file yang sudah pernah disimpan.
• Ctrl + P berfungsi untuk pengeplotan gambar (Plot).
• Ctrl + Q berfungsi untuk mengakhiri atau keluar dari AutoCad (Quit).
• Ctrl + S berfungsi untuk menyimpan gambar yang sedang dikerjakan (save).
• Ctrl + shift + S berfungsi untuk menyimpan gambar yang sudah pernah disimpan sebelumnya dengan menyimpan kedalam nama file atau bentuk yang lain (Save As).
• Ctrl + V berfungsi untuk melakukan paste dari Clipboard (Paste from Clipboard).
• Ctrl + shift + V berfungsi untuk melakukan paste block (Paste as block).
• Ctrl + Y berfungsi sebagai Redo.
• Ctrl + Z berfungsi sebagai Undo.
• Ctrl + 1 berfungsi menampilkan Properties.
• Ctrl + 2 berfungsi untuk menampilkan DesignCenter.
• Ctrl + 3 berfungsi untuk menampilkan Tool Palettes Windows.
• Ctrl + 4 berfungsi untuk menampilkan Sheet Set Manager.
• Ctrl + 8 berfungsi untuk menampilkan kalkulator (Quick Calc).