Anda gak punya interface gui untuk membakar iso image ??? tentang anda bisa membakarnya melalui terminal :
lakukan scan terhadap CD/DVDRw anda dengan perintah :
# cdrecord scan
wodim: No write mode specified.
wodim: Asuming -tao mode.
wodim: Future versions of wodim may have different drive dependent defaults.
Quickly guessing the name of a drive capable to write CD-R, please wait…
Found /dev/cdrw, assuming dev=/dev/cdrw
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : ‘TSSTcorp’
Identification : ‘CD/DVDW TS-L632D’
Revision : ‘TI01′
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
wodim: Cannot load media with this drive!
wodim: Try to load media by hand.
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
wodim: No such file or directory. Cannot open ’scan’.terlihat jelas bahwa device CDRw yang saya gunakan berada pada /dev/cdrw
maka kita bisa membakar iso image dengan perintah :
#cdrecord dev=/dev/cdrw -v speed=12 -eject ubuntu-7.10-desktop-i386.iso
perintah diatas akan membakar dengan speed 12 kali … bisa anda ganti – ganti sesuai dengan CD/DVDRw anda.
Akan muncul prosesnya sebagai berikut :
wodim: No write mode specified.
wodim: Asuming -tao mode.
wodim: Future versions of wodim may have different drive dependent defaults.
TOC Type: 1 = CD-ROM
scsidev: ‘/dev/cdrw’
devname: ‘/dev/cdrw’
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.2
SCSI buffer size: 64512
atapi: 1
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : ‘TSSTcorp’
Identification : ‘CD/DVDW TS-L632D’
Revision : ‘TI01′
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0×0009 (CD-R)
Profile: 0×0015 (DVD-R/DL sequential recording)
Profile: 0×0016 (DVD-R/DL layer jump recording)
Profile: 0×002B (DVD+R/DL)
Profile: 0×001B (DVD+R)
Profile: 0×001A (DVD+RW)
Profile: 0×0014 (DVD-RW sequential recording)
Profile: 0×0013 (DVD-RW restricted overwrite)
Profile: 0×0012 (DVD-RAM)
Profile: 0×0011 (DVD-R sequential recording)
Profile: 0×0010 (DVD-ROM)
Profile: 0×000A (CD-RW)
Profile: 0×0009 (CD-R) (current)
Profile: 0×0008 (CD-ROM)
Profile: 0×0002 (Removable disk)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1112320 = 1086 KB
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
FIFO size : 4194304 = 4096 KB
Track 01: data 695 MB
Total size: 799 MB (79:10.08) = 356256 sectors
Lout start: 799 MB (79:12/06) = 356256 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 7
Is not unrestricted
Is not erasable
ATIP start of lead in: -11597 (97:27/28)
ATIP start of lead out: 359849 (79:59/74)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 20

By : w3hol (w3hol@kalonk.com)
Y! : w3hol
kalonk community
open u mind with open source