Blogs about: Cutting And Shaping
Featured Blog
Flickr Photoset of Building Process
Flickr Photoset View as Slideshow Plywood to boat!… more →
Building Jim Michalak's Ladybug
Flickr Photoset of Building Process
Murray Stevens wrote 1 year ago: Flickr Photoset View as Slideshow Plywood to boat! … more →
4/389 Mast!!! and Decking
Murray Stevens wrote 1 year ago: Well, today I steeled up my courage and went at the mast with the Makita 1902 planer I purchased a w … more →
12/368 First Coat of Paint On!
Murray Stevens wrote 1 year ago: The last few days have been spent mostly sanding and sanding and sanding. My only advice to anybody … more →
10/343 Hull Nearly Ready for Primer
Murray Stevens wrote 1 year ago: The last three days have been busy as I finished coating the bottom and sides with two coats of epox … more →
3/333 Tiller, Final Coat of Epoxy
Murray Stevens wrote 1 year ago: Tonight I finished the tiller. I clamped it to a sawhorse and used the jigsaw to cut most of the mat … more →
5/330 Small bits
Murray Stevens wrote 1 year ago: Today I took my mast to a local furniture shop to have the tapers cut but when I got there and told … more →
10/325 Decisions, decisions...
Murray Stevens wrote 1 year ago: Since last weekend I have sanded the entire hull so that it looks fairly good to my untrained eye. I … more →
2/277 Mast Material
Murray Stevens wrote 1 year ago: While on vacation on Vancouver Island we stayed a couple of days with friends, Bob and Liisa, in Lad … more →
15/269 Transom, Hatch Covers, etc.
Murray Stevens wrote 1 year ago: The last couple of days I have gotten a fair bit done. I am undecided on whether or not to use the e … more →
10/254 Dylan Walker - This Bolt's For You!
Murray Stevens wrote 1 year ago: The last couple of days have been busy. I have worked part days and come home to work on the boat. W … more →
5/244 Front Deck Reinforcements
Murray Stevens wrote 1 year ago: Before going to work this morning I epoxied two support pieces to the sides of the front compartment … more →
6/236 Hatches
Murray Stevens wrote 1 year ago: I slept in a bit this morning but got up to a cool morning on the edge of rain. It was a nice change … more →
7/230 Seats!
Murray Stevens wrote 1 year ago: Today I spent a lot of time with the belt sander shaping the rudder and leeboard. I also drilled hol … more →
6/223 Seat Support, Mast Partner and Step
Murray Stevens wrote 1 year ago: I ripped the seat support piece and got it installed. Because the bolt that the leeboard rotates aro … more →
7/210 - Seat Supports, etc Photo Catch-up
Murray Stevens wrote 1 year ago: Sunday, June 29th was a HOT day…well for here anyway after the long cold spring we have had. I … more →
2/201 More Leeboard Guard Action
Murray Stevens wrote 1 year ago: Picked up a 5/8″ Forstner bit today to countersink holes large enough for the washers used wit … more →
4/199 Leeboard Guards Nearly Done
Murray Stevens wrote 1 year ago: Today I picked up some more lumber from Windsor plywood before heading for home. Once I got home I s … more →
10/195 June 18-23/2008 Leeboard
Murray Stevens wrote 1 year ago: The pieces of 1/4″ plywood that I laminated together…weren’t. I had gaps and I had … more →
2/183 More Stem Work
Murray Stevens wrote 1 year ago: Today after work I drove down to Lee Valley and picked up a big honking router bit..a straight templ … more →
