Senior Materials Engineer – Oman

Hi,

Here the Placement for  Senior Materials Engineer – Oman

Our clients are a leading provider of professional services to the energy, resources and complex processes industries.

They have immediate openings for the following skills:

Senior Materials Engineer – Oman

Location: Coastal

Role:

• Develop and lead material selection process for Large Hydrocarbon projects.
• Responsible for defining material selection procedures,
• Must be aware of all international standards and codes used in large upstream oil and gas projects,
• Analyze material failure investigations,
• Approve welding standards,
• Understand and apply corrosion mitigation measures,
• Verify corrosion analysis,
• Provide support to material and corrosion, project specific, studies.
• Analyze critically outcome of non conventional studies.
• Report any deviations and possible causes of material failure.

Qualification:

Bachelors Engineering Degree or Masters Degree in Metallurgy

Experience: 

• 15 years and above experience, a min of 10 yrs (4 yrs shall be in upstream facility) experience in oil &gas engineering related to materials selection / corrosion control.
• Fully conversant with relevant international standards.
• Experience with Company and/or Shell Group projects and standards (SPs / ERDs and DEPs) are strongly preferred.
• Shall be we conversant with CS, SS, DSS, SDDS, Incoloy 625/  825, Corrosion resistant linings (eg PE, FBE, PP etc), Clad vessels, Non metallic materials like HDPE, GRE-Piping etc applied in oil & gas industry.
• Experience in using corrosion assessment software to arrive at corrosion rates.
• Experience in material selection related to sour & high sour services in oil & gas industries

General:

• Knowledge of engineering research work conducted on material selection

Particular: 

•   Analytical and problem solving

Personal:  

•   Team player and good communication skills

Principal Accountabilities

• Categorization of material selection for project specific requirement Corrosion Assessment, Materials Selection, Failure Analysis, Inhibitor Selection and Cathodic Protection.
• Corrosion Assessment and Materials Selection, Preparation of specifications for Material selection, Welding, Fabrication, painting / coating and corrosion protection of flow lines, pipelines, associated oil and gas piping & equipments at various stages of project (eg. Concept selection stage, FEED, DD)
• Technical evaluation of Bidders to ensure adherence to contract Specifications. Review of vendor drawings, Welding Procedure Specification (WPS)/PWHT procedures, Painting/Coating and QC procedures; analysis of corrosion monitoring data, Corrosion Assessment, Failure analysis and preparation of corrosion control procedures.
• Preparation of Materials Selection and Corrosion Control Philosophy and preparation of Materials Selection Diagram (MSD) for major equipment and Piping.
• Preparation of Design General Specifications for Cathodic Protection of On-grade tank bottoms and buried piping.

Please send your latest updated profile to radha@kbsconsultants.com

Contact Us:

KBS Consultants

Flat H,Kulothungan Apts,

No, 5 Natesan Road,

Ashoknagar,

Chennai 600 083.

India.

Phone: +91-44 2489 5341 / 2371 9622

VisitOurSites:

International jobs: http://www.jobsearchworld.com

SAP ERP Jobs : http://www.jobsvista.com

Core Engineering Jobs : http://www.gotachance.com

Technology Jobs : http://www.kbsconsultants.com

India Jobs : http://www.kbsconsultants.net.in

http://www.kbsconsultants.org.in

Objective: Our aim was to present a failure analysis after cochlear implant revision surgery in a large series of children and adults and to assess the outcome and audiologic performance. Methods: Fifty-six cochlear implant failures that occurred in 422 devices implanted between 1990 and 2007 at the Department of Otolaryngology, Head and Neck Surgery at the University of Mainz, Germany, were retrospectively analyzed. The causes of failure were reviewed evaluating the individual history, telemetric and intraoperative findings and manufacturer’s investigation reports. Results: We performed 56 surgical revisions in a series of 422 consecutive implants (overall revision rate: 13.27%). The most frequent causes for revision were hard failures (58.9%), most commonly caused by traumatic impact (37.5%), especially in the pediatric population. Soft failures were less frequent (21.4%). Surgical reimplantations, although challenging in some cases, were performed without complications and with an electrode insertion depth comparable to that at the time of the initial implantation in all patients. The average audiologic performance improved by 2.4 dB in pure-tone perception levels after reimplantation. Conclusion: The cochlear implant failure rates vary between children and adults as well as between different implant manufactures. However, cochlear reimplantation is safe with excellent and predictable results in audiologic performance.

from ORL -Journal for Oto-Rhino-Laryngology and Its Related Specialties

The engineers at Reksolindo have an interesting inquiries for failure analysis suffered by different parts of equipment lately. Quitely different operation condition (high temperature and ambient temperature, medium and low carbon steel, marine atmosphere versus caustic feed water).  We are really satisfied for microscopy works that can catch the clear picture of lightning type-branched  small crack surrounding opening tip of main cracks below. The lightning  type and branched of small cracks which are believed in many literature [1,2,3]as the finger-print of stress corrosion cracking mode. And it was very clueful which made us more easier to find the contributing causes .

1. Chloride-SCC in an uncoated medium carbon steel bolt in marine atmosphere

2. HAZ – Caustic SCC at 100-250 °C

Berikut Format untuk tugas Matakuliah Mekanika Perpatahan & Failure Analysis (MPFA):

Kertas= A4; Font=Arial:11; spasi=1,5; kiri-atas=4 cm; kanan-bawah=3 cm;

Isi Tugas:

1. Lembar Judul (Memuat: Nama mhs, npm, judul tugas, nama matakuliah, lambang Untirta, nama jurusan, fakultas, & tahun)
2. Kata Pengantar (Memuat: Ucapan terima kasih, overview tugas, kendala dalam tugas, dll)
3. Daftar Isi (boleh tidak diberi nomor halaman)
4. Pendahuluan (hal yang menjadi masalah, kaitan teks/buku dengan permasalahan)
5. Isi (Hasil kutipan dari buku/teks/Internet)
6. Daftar Pustaka
7. Penutup

Demikianlah, semoga dapat menjadi pedoman dalam mengerjakan tugas dalam matakuliah MPFA.

Untuk Formatnya yang jelas silahkan di down load dengan klik Format Tugas

P’Fitru

Ini adalah bahan kuliah pertama untuk mata kuliah Mekanika Perpatahan dan Failure Analysis. Silahkan klik failure-analysis-pertemuan-ke-1