Hello, today we have a new signature tutorial for the Gimp. This signature was made by Ignotus. You may downlaod the XCF file here.

Enjoy!

1. Open both the photo and the mask you want to use as layers (using the drag and drop method if you’d like- if you do this, be sure to open the picture first as it will likely be the larger file)

2. Choose the mask layer from the layers menu —> Right Click—> choose Alpha to Selection. After you do that the mask will get the ‘dancing ants’ effect. Don’t panic if it looks more like the mask is shimmering or animated, sometimes GIMP makes it look that way when there are partial transparencies in the mask. If it’s doing that then you picked the right thing!

3. Now that you have your dancing ants around the mask, click Edit—> Fill with BG Color. This should make your mask turn mostly white. Again, a good thing! Now you want to copy the mask. So, click Edit—> Copy

4. Now you’re going to add the mask to the picture. Do do this, choose the picture layer from the layers channel. Right click —> Add Layer Mask. Then you’ll get a pop up, choose Black (Full Transparency) Once you click to confirm your choice, your picture will actually disappear, leaving just the white mask.

Once you click to confirm your choice, your picture will actually disappear, leaving just the white mask.

5. Now you make sure that you have the picture still selected in the Layer Menu, next to the picture you’ll see a black box with a white border- this is good. Now you click Edit—> Paste. When you do that it will actually make the portion of your picture under the mask reappear. You can then move the mask, resize it, whatever you need. Once you’re done positioning it, click Anchor Selection. Then you can delete the Mask layer (do this by right clicking on the layer, and choosing Delete Layer)

6. Now you want to Merge all the layers (this is where the clipping part comes into play) Click Image —> Merge Visible Layers.

When you do that you’ll get this pop up, Choose Clipped to Image and then Click Merge:

7. This is a totally optional step, but I always do it to make the mask more manageable to work with within a layout. I autocrop the image so that it’s only the size of the mask itself. To do that Click  Image —> Autocrop Image. This handy dandy tool will automatically crop it to the size of the actual object.

Now you’re all done! Here’s my finished product to reuse in a layout. The mask is a Freebie from Twin Mom Scraps

This tutorial written using GIMP 2.6

Okay- here we go! This is a great way to get familiar with basics in GIMP, and I’ll be posting more specific breakdown of the specifics later for those of you who find this tutorial too broad. The best way to learn something is to DO it, so open up GIMP and see what you can do!

1. Open up GIMP, this is how my screen looks upon open:

2. I use the ‘Drag and Drop’ method to open all files in GIMP as I have found that after opening about 3 files using the ‘Open’ option under ‘File’ that GIMP would crash and I’d lose all my work to that point. Since when you’re scrapping you use LOTS of elements, that can be inconvenient. So- I simply keep my folder containing the kit I’m working with (or numerous folders on occasion) and ‘grab’ the file with my mouse (Click the file and don’t release the button) then I ‘drag’ the file to the blank middle area of the screen on GIMP directly from my computer files (continue to hold the button and move the mouse to the center of the GIMP screen) and ‘Drop’ (release the mouse) GIMP will then open the file as a new document. As a general rule, you want to make the first thing you drag and drop your background. This will be the biggest file and the rest of the elements should be coordinated to fit within that space. If you start with too small a document, it can wreak havoc later! So grab your favorite background, drag it and drop it from your computer files into GIMP!

So now my screen looks like this:

3. Then drag and drop any elements you wish to use. Move the elements the way you’d like them. Simply choose this tool and be sure to click ‘Move the Active Layer’, also make sure you’ve chosen the correct layer under the Layers Channel before trying to move. Remember that the ‘Undo’ button is your friend in case you make a whoopsie! The ‘dancing ants’ (the moving dotted line) should be outlining the element you wish to move before you move it after you choose it in the layers menu.

So I added a frame, and moved it from the center of the screen.

4. Rotating elements: Now I’d like to rotate the frame since the picture I want to use is horizontal. Make sure the correct layer is picked again, and choose the rotate tool. Click the element you are rotating, then the rotate window will pop up. Drag the mouse over the element until it’s rotated the way you want, then click the rotate button.

5. Resizing elements: As you can see below my picture is too large for my frame, so I need to resize it. Choose the ‘Scale’ Tool, be very sure to check the ‘Keep Aspect’ button! Choose the Correct Layer; Choose the Scale Tool; Check the Keep Aspect Box; Click your mouse over the picture you’re resizing and the Scale box will pop up; Click and Drag Mouse to resize, and then Click Scale… tada!

6. Rearranging layers. Now my picture is the right size, but above the frame rather than under it, so I need to move the layer down under the frame. Very simple. Just choose the layer you want to move, then click the up or down button at the bottom of the layers box to rearrange.

And it now looks like this!

7. Now add any other elements or text you’d like and arrange them with the tools listed above. When you’re done arranging them, you need to Merge all visible layers and save your creation! Be sure you’re done arranging layers when you chose the Merge option, because there will be no more layers after you do it. Choose Image, and then choose Merge Visible layers from the drop down. Choose ‘Clipped to Image’ in the pop up box. Then choose File and Save your creation with a new name! You’re all done!

You’ve gained some good experience looking around GIMP- keep trying new things! That’s how you learn!

Here is my finished page. All graphics used are by Amy Sumrall’s Rawr and Berry Sweet kits. You can get them and more of Amy’s awesome goodies at: http://www.thedigichick.com/shop/manufacturers.php?manufacturerid=70

Vignettes are great, yes they can be regarded as a lens defect, but sometimes they can add that certain something to an image. I have seen other tutorials on the web which are very similar to this one, differing only in that I like to use  Layer Modes for most of my vignettes. I particularly like the boost to contrast and saturation that the Multiply mode gives, I think it has a more retro feel. Anyway let’s begin.

 
Step 1. Open your image in GIMP, right click on the “Background” layer and select Duplicate Layer. Note that this new layer has become the active layer, as denoted by the white border.

 
Step 2. Right click on the new layer “Background copy” and select Edit Layer Attributes, enter the new name “Vignette” and select OK.

 
Step 3. Right click on the “Vignette” layer and select Add Layer Mask…

 
Step 4. In the Layer Mask dialog box choose the default White (full opacity) and select Add.

 
Step 5. Select the Blend tool from the Toolbox, or by selecting Tools > Paint Tools > Blend. Ensure that your Foreground color is Black and your Background color is White. Use the default FG to BG (RGB) Gradient and change the Shape: to Radial.

 
Step 6. Turn OFF the visibility on the “Background” layer by clicking on the little eye icon. Then Click in the center of your image (or the main point of interest) and drag out toward the corner of your image. Sometimes you may need to go out beyond the edges of your photo as I did in this example. Repeat this step as many times as is necessary, the aim here was to make the majority of Mischa’s face transparent.

This is a great example of Layer Masks in action. White areas are treated as Opaque (solid) while Black areas of the mask are treated as Transparent. The information is still there in the layer but the mask controls what is displayed.

 
Step 7. The Blend tool produces a very soft transition between black and white, we can sharpen the vignette by shortening this transition. Launch the Curves tool by selecting Colors > Curves… Click to add a control point in the center of the graph and then raise the right hand portion and lower the left hand portion. You may need to experiment a little here to see what works.

 
Step 8. Turn ON the visibility of the “Background” layer by clicking the little eye icon and change the Layer Mode: to Multiply

That’s it. one nice subtle vignette effect. I recommend that you experiment with some of the other Modes, Overlay can work well, Burn can give massive saturation boost and Subtract can give a very dark vignette. Also experiment with the opacity to lessen the effect.

If you are still not quite getting the vignette you want try changing the Mode back to Normal and use the Brightness/Contrast, Levels or Curves tools to manually darken the “Vignette” layer. If you are trying this make sure that you select the “Vignette” layer (as in the actual image) rather than the Layer Mask, the white border will tell you which is active.

Happy GIMPin’

T.

Haven’t posted in ages, too many irons in the fire me thinks. I am going to show a very simple method of enhancing the existing colours in a digital photo using GIMP. This tutorial is aimed at those who are new to GIMP and new to photo editing. This is based on GIMP version 2.6.4 and requires no additional scripts or plug-ins beyond the basic default installation.

Here’s a picture I took while out walking the dog one day, some rather sorry looking birch trees. My aim is to enhance the Yellows to give a nice autumnal feel and also to give a boost to the Greens, so let’s begin.

1. Open your image and from the Colors dropdown menu select Colors > Hue-Saturation…

2. Select the Yellow radio button and move the Saturation slider to the right to increase the stauration, in this example I have increased the saturation of the yellows by 20 as I felt that it suited this image.

3. Select the Green radio button and again move the saturation slider to the right, this time I have increased the saturation by 30. When you are happy with the results click OK.

Well that was easy, I rarely use the Hue and Lightness sliders so I am not going to take the time to explain what they do, but feel free to experiment with them or check the GIMP Help, if you haven’t installed the Help system they are all available on www.gimp.org

The Hue-Saturation tool really is quite useful, some possible ways you might use this tool of your own photos include enhancing blue skies, enhancing reds and yellows in sunsets, reducing red in faces (particularly sunburnt one’s). This list of possible uses is really only limited by you imagination. Here’s an example in which I have used the Hue-Saturation tool to desaturate everything but Blue.

Happy GIMPin’

T.

 
 
GIMP gives us a number of options for influencing the tone and colour of our photos, however “Levels” and “Curves” are the most versatile and hence the ones which you will use almost exclusively. Most of these other tools are pretty self explanatory and can be found in the Colors dropdown menu, there are also some fully automatic tools in Colors > Auto. There are also some new options in GIMP 2.6 in the form of GEGL Operations, these can be accessed by selecting Tools > GEGL Operation… and selecting from the dropdown, I’m particularly pleased with the color-temperature tool.

I had intended to write seperate tutorials for Tone and Colour and indeed the “Levels” and “Curves” tools, however I have chosen to go a different route. I shall instead improve both the Tone and Colour together, working through Levels and on to Curves as I do so. Hopefully this approach will be educational, as it will allow you to see how changes made in Levels are implemented in Curves.

So here is a shot from an underground passageway in an old ruin near where I live, you can see that the image is washed out and lacks contrast, there is also a blue colour cast on the stone work and rubble in the foreground. So lets begin, I am assuming that you understand the basics of the image Histogram, if not please read Histograms: A Levels and Curves Primer first.

In order to make this followable I am going to split the process into three parts, Tonal Range, Whitebalance (colour cast) and Tone (brightness/contrast).

 
1. Launch the Levels tool by selecting Colors > Levels… and try our automatic options. Auto Levels will work very well on the majority of photos (this is one example where it fails, Auto Levels results in far too much contrast and does little to remedy the colour cast). If Auto fails click on Cancel and relaunch the Levels tool again.

2. If you are happy with the colour in your image you may wish to skip ahead to step 3.  This is certainyl not the case here so we’ll try the three Colour Picker buttons, selecting a Black point from inside the chimney, a White point from the brightest point on the wall outside and a Gray point from the stonework gives quite good results on this image, however it failed to fully get rid of the colour cast. However it does give us a good basis for further work.

Hint: You do not need to use all three colour pickers, good results can sometimes come from using two or even just one. Also I usually use the Gray picker last, the reason for this is that it can be difficult to tell what is neutral grey, hence the grey step may have to be repeated.

 
Tonal Range

3. Launch the Levels tools by selecting Colors > Levels… We can see that the Value channel histogram does not extent to either end of the scale, this compressed tonal range is a reflection of the washed out, low contrast nature of the image, so we need to increase the tonal range.

4. Grab the left triangle pointer and drag it out to the start of the histogram graph, this will remap the tones in our image so that the darkest tones will be rendered as pure black.

5. Most images will contain some white areas so I would normally drag the right pointer to the right edge of the graph, however in this case I know that this image contains little or no white, nor do I want it to, so grab the right triangle pointer and drag it slightly to the right. The aim it so increase the tonal range without remapping the brightest tones to pure white.

Hint: The center triangle pointer represents the midtones, moving this to the left or right will darken or lighten the image respectively.

6. Take a look at the histograms for the Red, Green and Blue channels. Note the changes made by the use of the three color picker buttons, the tonal range has been increased and the center triangle pointer has been moved away from the default 1.00 position, thus increasing Red and Green in the midtones and reducing Blue.

Hint: If your histogram is very flat and shows no discernible peaks or detail try switching the mode from Linear to Logarithmic, I have circled the buttons on the above graphic for the Red channel.

 
Colour Cast

7. Time to get rid of that colour cast, select the Blue channel from the dropdown in the Levels dialog box.

8. Unfortunately in this case moving the center pointer further to the right (reducing blue) simply makes the image much too green, it’s time for Curves to come to our rescue. Launch the Curves tool by selecting the Edit these setting as Curves button in the Levels dialog box.

9. Take the time to look at the Curve for the Value channel. Observe that the graph is no longer the 45 degree angle we expected. The top and bottom of the graph have been moved inward, this is the curves representation of the increase to tonal range we made earlier using Levels.

10. Now take a look at the curves for the Red, Green and Blue channels, again we can see the tonal range increase but this time we can also see the center of the curves has been raised for Red and Green and lowered for Blue. This is the curves representation of the changes made using the three Color Picker buttons back at the beginning.

11. We wish to remove further blue from the highlight (brighter) areas so select the Blue channel. Grab the top right of the curves and drag it down until the line becomes diagonal.

It is probobly good practice to repeat this step for the Red and Green channels also, however I am not going to do it in this case for one very simple reason. Histograms are neither right nor wrong, I am happy enough with how the blue has been removed while keeping the red of the brickwork in the ceiling and the green of the mossy walls. My attitude would be that it is better to make any edits based on how the image looks rather than upon what may be suggested by the histogram.

 
Tone

12. As a final step we will alter the tone slightly so as to better match my memory of what is basically a damp undergroung passageway. Select the Value channel and click of the center of the curve to create a control point (circled below), next click on an area in the lower (dark) portion of the curve and drag it downwards slightly. Next click of an area in the upper (bright) oprtion of the curve and rise it slighly. This is the classic “S” curve you will frequently hear mention of, we have used it here to darken the dark areas while simutaneouly brightening the brighter areas. This is the real power of curves, it gives us very fine control by allowing us to affect as many control points as we see fit, 5 in this example.

Hint: Soft gentle curves tend to work best. One way to make very small adjustments easier is to use the arrow keys (on PC, I’ll check this in Ubuntu), the up and down keys move the selected control point up and down, while the left and right arrow keys allow us to scroll through control points.

13. When you are finished click OK.

 
Levels and Curves can be  a tricky at first, however any time you put into learning them will be time well spent. Unfortunately these tools give us so much control that it now becomes difficult to know when to stop, I’m thinking that I overdone the contrast a little in this example and am considering starting again, but it should serve for demonstrative purposes.

 
Happy GIMPin’

T.

Gimp gives us a number of tools for controlling the tone and colour of our images, but the undisputed kings are Levels and Curves. The vast majority of our photo editing needs will be catered for by either (or both) of these tools so they are quite important. This is just a primer to introduce some concepts, I’ll write a post showing Levels and Curves in action soon.

In order to use both Levels and Curves effectively you will need to understand the image Histogram, Sounds complicated at first but it’s actually quite simple. the image Histogram is a graphical representation of the tones in our image, from pure black on the left, to pure white on the right. The height of the graph represents that number of pixels within the image for each of the values in between.

So why is this information important to us?. Because it tells us quite a bit about our photo.

 
Exposure

if we see the majority of the graph clumped up on the left hand side it suggested that our photo is too dark (underexposed). If the majority of the graph is clumped on the right if suggests that our photo is too bright (overexposed).

In addition it can also tell us something else, if we see the graph spill off the right hand side it tells us that sections of our photo are “blown out” (pure white with no detail or texture), conversely if our graph is spilling off the left it tells us that our shadows have been “clipped” (pure black with no detail or texture).

 
Tonal Range

The image Histogram can also tell us about the tonal range of our photo. If we see that our graph is clumped up somewhere in the middle and not reaching to either (or both) end of the range, then our photo has a compressed or limited tonal range (our photo only contains a subset of the possible tones). The vast majority of scenes will contain both black and white so this usually suggests a problem. Look at the histogram of any photos you have which are hazy and lack contrast, limited tonal range is probably the problem.

 
Colour casts

There is more than one histogram or course, there is the Value histogram (Luminosity) which gives us basic brightness information. However there is also a seperate histogram for the Red, Green and Blue channels (we’ll skip the Alpha histogram for now). We know that pure white, pure black and neutral grey should contain equal amounts of red green and blue, so if one (or more) of the colour histograms looks significantly different from the others it may suggest a colour cast. Here is the Red, Green and Blue channels from an image with a strong blue colour cast.

 
Hopefully you now have some idea of the usefulness of Histograms, your digital camera may well have a histogram function which can be viewed during playback, if so consider turning it on and bring the power of histograms out into the field. Note however that many cameras only show the Luminosity histogram, this is of limited use, you really need the colour histograms if you plan to use the cameras histogram as a light meter, that said even just the luminosity histogram can be informative, especially on those sunny days when you cannot see the LCD screen on your camera well.

Tip: Don’t bite off more than you can chew, concentrate on the Value histogram until you are comfortable with it, it’s probably the one you’ll use most anyway.

 
T.

 
We are all familiar with the dreaded Red Eye in photographs. Fortunately most photo editing applications (GIMP included) have a Red Eye tool built in. Unfortunately most work by detecting red and working from there and hence fall flat on their collective faces when confronted with the green eyes which photos of dogs and other pets can be afflicted with.

This was exactly what happened to me today, anyway after some trial and error I came up with this method, it may not be perfect but it might be of some use in those situations where conventional Red Eye tools fail. Another option of course would be to select the offending colour and minimise it’s effect using the Channel Mixer tool, but I find this to be finicky process and I normally only end up changing the colour rather than elimenating it.

This photo of Lal was taken shortly before she died, she was a diabetic and the cataracts, which are a very common symptom of the disease, have caused a particularly nasty green eye effect. In this case I started by opening my file in GIMP and…

 
1. Zoom in on one of the eyes and select the Fuzzy Select Tool from the Toolbox and click on the eye. You will need to adjust the Threshold value until the entire green area is selected, In this example I increased the Threshold to 100. One thing I like about this method is that it does not matter if any catch lights are selected.

 
2. There is normally a small rim of colour just outside the area we selected. We can enlarge the selected area slightly by going to the dropdown menus and selecting Select > Grow… In the resulting dialog box choose to grow the selection by 1 pixel and click OK (you may need to use more in some cases)

 
3. To get rid of colour select Colors > Desaturate… Choose a desaturation option and click OK. I have used the Lightness option in this case because it produced the darkest result.

 
4. Launch the Curves tool by selecting Colors > Curves… Then darken the selected area by using your mouse to grab the center of the curve and drag it down and to the right.

 
5. Use the Clone tool from the Toolbox to fix any odd reflections there may be in the eyes, in this case reflections from Lal’s cataracts. (This step will be unnecessary in the majority of cases).

 
6. The transition between the selected area and the rest of the image will often be too “hard”,  select Select > Grow… and this time enlarge the selection area by 3-5 pixels (or whatever suits your image) then select OK.

 
7. To do the actual softening use a gaussian blur. Select Filter > Blur > Gaussian Blur… I used the default of 5, then select OK.

 
8. Your eye should now be done, turn off the selection with Select > None and repeat the process for the other eye.

 
Happy GIMPin’

T.

 
How many times have you taken a photo of a building (trees can to troublesome too) and found that the walls are sloping inward as they rise. This is called “converging verticals” or “keystoning” and is the result of tilting your camera upward to get the building in frame. You can avoid it by going further back and zooming in, as you will not have to tilt the camera upward.

To correct it when it does occur is quite easy, I have selected a photo of a old ruin near where I live as it shows quite a pronounced example of this effect, unfortunately I could not go back any further due to my aversion to rusty barbed wire. To correct this, open your image and…

 
1. Move you mouse to the bottom of the left corner of the building, note the coordinate given at the bottom of the screen.

 
2. To add a guide line drop the dropdown menu select Image > Guides > New Guide. In the ‘Script-Fu New Guide’ dialog box select Vertical for the ‘Direction:’ and for the ‘Position:’ enter the coordinate you noted in step 1.

 
3. Repeat steps 1 & 2 to add a guide on the right hand side of the building. I added one at the back right corner because it was easier to see against the sky.

4. From the ‘Toolbox’ select the Perspective Tool and then mouse click in your image.

5. With your mouse, click and drag the top corners of your image outward. You may need to go back and forth between to two corners as moving one affects the other. When you are happy select Transform

 
6. Turn off the guide by selecting Image > Guides > Remove all Guides

7. Flatten your image by selecting Image > Flatten Image

 
Happy Gimpin’
T.

Christmas (or “The Holidays” for the Politically Correct) is coming, bringing with it parties, festivities and the photos that inevitably go with them. And just in time is this great gift for you Photoshoppers and Gimpers: 24 free Photoshop tutorials!

OK, they’re not Gimp tutorials, but many of the techniques should work with a bit of modification. And if you’re proficient with Gimp you should be able to make the transition and translation.

PhotoShop and Gimp are registered trademarks!

This installment in my GIMP Beginners series is about Rotating and Cropping images (just as the title suggests). The areas covered being basic orientation (portrait vs’ landscape), straightening horizons, corrective cropping (after leveling of horizons) and cropping to a specific ratio. This tutorial is based on GIMP version 2.6.2.

 
Basic Orientation (portrait vs’ landscape)

So you’ve just opened your image in GIMP but you find yourself placing your head on one shoulder to see it right. There is luckily a one step fix for this problem.

1. From the dropdown menus select Image > Transform and then select Rotate 90 clockwise or counter-clockwise as appropriate.

Tip: Rotating a .JPG image in this fashion will cause some deterioration in quality. If you are editing an image for use on the internet you will need to rotate it, however if you are editing a file for printing you may wish to simply skip this step and perform your edits in the default orientation, your printer will not know any differently.

 
Straightening Horizons

Now check to see that the camera was level when the shot was taken, the best check for this is the horizon. If your horizon sloping to one side or all your buildings are leaning to the left or right proceed as follows.

1. Move you mouse to an area roughly in the center of the horizon and note the coordinate given at the lower left corner of the image window.

2. From the dropdown menus select Image > Guides > New Guide…

3. In the resulting ‘Script-Fu New Guide’ dialog box select Horizontal from the dropdown box and enter the number which we memorised in step 1, then click OK. (If you are using a building to test the straightness you will select Vertical from the dropdown and enter the number from the left rather than the right).

4. From the Toolbox select the Rotate tool and mouse click anywhere in your image.

5. In the ‘Rotate’ dialog box change the Angle until the horizon runs parallel to our guide, click OK when you are done.

6. Now turn off your guides by selecting Image > Guides > Remove all Guides.

Tip: If you are using a building it is best to select one from near the center of the photo. This is due to the fact that some camera lens (wideangle) may cause buildings to slope inwards as they rise, this is called “converging verticals”, I have a feeling that we’ll be coming back to this is a later installment.

 
Corrective Cropping

If you have rotated your image in order to straighten it corrective cropping will your next step. To do this

1. From the Toolbox select the Crop tool. To keep the cropped image the same basic shape as the original make sure to select Fixed for ‘Aspect Ratio’ in the tool options.

2. Using your mouse, click and drag to roughly the size you wish to crop, you can now fine tune the crop area by using the mouse to drag the sides of the area to their final positions. When you are happy go back to the ‘Crop’ dialog box and click OK.

 
Cropping to Specific Ratio

There will of course be time when you wish to use cropping to change the basic shape of your image, for instance to fit an 8 x 10 photo frame. To do this

1. From the Toolbox select the Crop tool.

2. Make sure that Fixed is selected for ‘Aspect Ratio’ in the tool options and now use your keyboard to enter “8:10” in the box. You can use the Portrait and Landscape buttons to flip the crop area if needed.

3. Using your mouse, click and drag to roughly the size you wish to crop, you can now fine tune the crop area by using the mouse to drag the sides of the area to their final positions. When you are happy go back to the ‘Crop’ dialog box and click OK.


 
Happy GIMPin’

T.

I installed GIMP on a friends machine the other day, this is when I realised that there are a few steps which I carry out before I ever edit a photo. These a just a few small changes to the GIMP’s default setup which make things run a little more smoothly, for me at least. These may be of use to GIMP beginners to help get them up and editing.

OK so you’ve just installed GIMP, if not download it for free at www.gimp.org/downloads and install it as usual. You may wish to look at this post which explains how to set the GIMP’s file association during the install process, or afterwards if you already have GIMP installed.

Note that I am basing this on GIMP version 2.6.2

1. Organising on screen elements

The first thing to do after you launch GIMP is to arrange the onscreen elements to your liking. Here is a screen shot of my own preferred setup. Hint: (Open an image so you can better see where to place the ‘Toolbox’ and ‘Layers, Channels, Paths’ boxes.

a.) Once you have things arranged to your liking, go to the “Edit” drop down menu and select “Preferences“.

b.) Now go to “Windows Management” and click on “Save Windows positions Now“, ensure that “Save window positions on exit” is checked also and click “OK“. Your windows should appear as you like them next time GIMP is started (you may however need to maximise the image window).

2. The Grid Feature

The default setting for the grid (a very uesful tool I might add) is too small to be very useful when it comes to the large files from a digital camera. I always like to change the default to a more usable setting.

a.) Select “Edit” > “Preferences” to bring you back to the Preferences dialog and this time select “Default Grid“. in the spacing section change the “Width” and “Height” to 100 pixels (or whatever you personally like) and click on “OK“.

To activate the grid select “View” > “Show Grid“. Repeat the process to turn it off again.

3. Ensure Best Quality

You may have read that it not good practice to repeatedly save a .JPG file. This is due to the fact that .JPG is a compressed file format, as such the file is recompressed (subsampled) each time the file is saved and this will lead to deterioration of the image.

This step will limit this subsampling as much as possible and should be OK for a few svaes, however as you become more confident I suggest that you only save a .JPG file once, at the end of editing. If you are working on an important file or making a complex edit consider first saving your file in an uncompressed format, such as .TIFF or the GIMP’s native .XCF, and save to your hearts content.

a.) Open a .JPG file and select “File” > “Save As…“. In the ‘Save Image’ dialog box enter a junk filname and click on “Save“.

b.) In the ‘Save As JPEG’ dialog’ click on “Advanced Options“. Now change the “Quality:” slider to 100% and change “Subsampling” to 1X1, !X1, 1X1 (best quality). then select “Save Defaults“. You can now click on “Cancel” as we do now want to save this image at this time.

4. Use the Historgam

For photo editing I like to add the ‘Histogram’ dialog available as a reference. This setup guide is not really the place for a detailed explanation of what the image histogram is but, simply put the Histogram is a graphical representation of the tones in an image from pure Black on the left to pure White on the right.

As such it gives us some information about the exposure. If we see that the graph is clumped to the left, it suggests that the image is too dark (underexposed) and if we see that the graph is clumped to the right it suggests that the image is too bright (overexposed).

a.) To add the ‘Histogram’ dialog to your ‘Layers, Channels, Paths’ box select “Windows” > “Dockable Dialogs” > “Histogram“. this opens the ‘Histogram’ dialog in a new window.

b.) Now with your mouse grab the ‘Histogram’ dialog and drag and drop it onto the bottom of your ‘Layer, Channels, Paths’ as shown below.

5. Restoring Closed Docks

AAArrghh!, where’s that Layers thingy gone?. I have had this same experience myself. If you accidentally close the ‘Toolbox’ or ‘Layers, Channels, Paths’ boxes select “Windows” > “Recently Closed Docks” > “Whichever you closed“, and your back in business.

Happy GIMPin’,

T.

Just had a look at the stats on this blog and I noticed “straight line” among the search engine terms.

Then I realised that there is no straight line tool in GIMP, which is strange because I use straight lines all the time. Personally I often use multiple short straight lines and a soft brush to approximate curved edges when painting a Layer Mask.

Strangely I have no idea when or how I learned to do this, must have discovered by accident at some stage. It’s is however very simple, in Windows at least, then again everything is once you know .

1. Select the “Paintbrush” or other tool.

2. Left mouse-click where you want your line to start.

3. Press and Hold the “Shift” key on your keyboard.

4. Left mouse-click where you want your line to end.

Viola, you should now have a nice straight line.

I just checked and this “Shift” key trick works with all the tools listed in the image below for GIMP 2.6.2. I was surprised to see that it even works with the “Healing tool”, once you have first defined a clone point.

Solarisation is the effect whereby the properties of a material is affected by electromagnetic radiation.

It’s effects in photography were first discribed in 1859 by H. de la Blanchere and usually refer to the skewed tones which result from exposing an already exposed (used) film to light before or during processing. This effect was popularised in the 1920’s by American painter and phtographer Man Ray.

I saw Photoshop intructions for how to reproduce this effect digitally in a UK photo magazine (can’t remember which one, sorry), so all I had to do was GIMPify these intstructions.

A word of warning, this effect can look good on some images but just doesn’t work at all on others. Image selection is important and you may have to try this effect on a few different images to get one which “works”. The guy in the print shop thought I was crazy when he seen this image first, but he changed his mind once he saw the enlarged print.

1. I started with a photo of a neighbours 1931 Norton. The first thing we do is to desaturate the original image by selecting “Colors” > “Desaturate” from the dropdown menu. I have chosen to do this using the “Average” option.

2. To replicate the skewed tones characteristic of solarisation we need to produce a radical inverted “vee” tone curve, (GIMP shows its class here, as not all applications give sufficient control over the tone curve to replicate this effect). We have two options to create the inverted “vee” curve, a.) we can use the freehand mode, which can give a good, if somewhat wobbly curve. b.) the method I prefer as outlined here. Launch the “Curves” dialog from “Colors” > “Curves” and leave it on the default “Smooth” curve type. Grab the centre of the curve (straight line as yet) and drag it up to the top of the window.

3. Next grab the right hand end of the curve and drag it down to the bottom of the window.

4. Next gab a point on the curve near the top/apex/crest and drag it up and over so it is just beside the topmost point of the curve (I say just beside as two points cannot live at the same place, your top point will have an X coordinate of about 127, so aim to place your new one just beside it at 126 or 128 depending of whether you are dragging from left to right or right to left). Viola one inverted “vee” Solarisation type curve.

You may wish to launch the “Curves” dialog again and do some fine tuning, a gentle “S” curve often works well, I did not feel that it was necessary for this image. Be sure to try this effect out on some portraits, it can really emphasise the eyes and give a very aluminum “Metropolis” type feel as you can see in this photo of my cousins kid.

Happy GIMPin’,
T.

So. This is my first post. So I should make it good yeah? Okay. Simply this is a tutorial on removing backgrounds from pictures using the gimp. It’s quite straight forward to understand but can be tricky to do. Especially if you use a mouse like me.

This tutorial will include:

1. How to use the ‘Path’ feature.
2. How to effectively remove backgrounds.
3. Of course I will include screenshots to help visually.

To begin. We need a good image of course! This is the image I will be using:

Yeah. Good old spider man. Well lets get on with tutorial L=

If you use my image when you use this be sure to change from indexed to RGB, this will save you having to do it later. If you don’t know how to do it. Click on your image then:

• Image> Mode> RGB

First things first lets get to grips with the path tool:

The path tool is used to create ‘paths’ in an image. Have a play around with it before you go any further…

Done? Good. Lets move on. As you can see. With the path tool selected when you press anywhere on your image you begin to create a path, this is useful because it allows you to create a path around anything you like. So. Lets create a path around Mr. Spiderman:

First off, best zoom into 200% or more. Make it easier on yourself for selecting the different ways.

Next lets begin drawing our path. Now. The path has to go right round Mr. Spiderman here. So pick a good place to start, and plot your points(Just place your first point with a click, then click again on the next spot and it will automatically join up, but you’d know that if you played around with it, or if you’ve used the tool for something else). If you wanna have a look at what I mean:

Don’t worry. That was the hard bit.

Okay next what you can do is first of all take of the zoom.(Back to 100%)

Now. On your Gimp Toolbox, look at the options for Paths and click the ‘Selection from Path‘ button.

Then. We should give this layer an alpha channel(so you’re backgroud will become transparent when we are done. To do that you click on your image and then(You will not need to do the image I am using, but for other pictures you might, always make sure that the layer has an Alpha Channel):

• Layer> Transparency> Add Alpha Channel

Now. We don’t want to get rid of our spiderman so first invert your selection.

• Select> Invert

And now to ensure our edges are smooth.

• Select> Feather> 5px.(Or whatever you prefer, play around with it)

Now cut(Ctrl+X), and now your done! You have your image with no background and the edges are smooth. Now you can make it’s background whatever you like.

It should look something like this:

Enjoy!

I have been a long time admirer of toned Black & White photographs. I recently read a book on this subject to see it I could use any staining techniques on digital prints (I see some tea and coffee staining experiment sin my near future). This book introduced me to the fact that some toners work from the highlights to the darks and some work from the darks to the highlights, so I thought to myself that this was a principle which I might be able to replicate in GIMP. I call it Quick N’ Dirty, as it is not an accurate representation of real wold toners, but it does produce an interesting image, in my humble opinion.

The original photo is of Cullahill castle in County laois, Ireland. It has had a quick “Auto Levels” adjustment but is otherwise unchanged. Persoanlly I didn’t much care for the colours which seemed oversaturated to my eye.

1. From the “Colors”menu select “Desaturate”. As you can see I have used the “Average” option here, but feel free to experiment.

2. From the “Colors” menu I next select “Curves”. On the “Value” setting I noted that the Histogram suggested slight underexposure, as such I dragged the top of the left slightly.

3. In order to simulate a green toner acting from the darks toward the hightlights I once again opened the “Curves” dialog. This time I selected the “Green Channel”. I mouseclicked in the centre of the curve (Straight line at this point) to add a n anchor point, I then dragged the bottom half of the curve upward to add green to the darker tones.

4. In order to simulate a blue toner acting from the highlight to the darks I again opened the “Curves” dialog and this time I select the “Blue Channel”. I again added an anchor point in the centre, but this time I want to drag the top half of the curve upward to add blue to the highlights (the sky in this case). Note that the curve is not as smooth as the one I used for green, this is because I noticed that the darker area in thetop left corner of the phot was not being affected, so I skewed the curve a little to counteract this.

5. I was going to call it a day at this point, when I asked myself “how would a more purple sky look?”. So back to the “Curves” dialog again, select the “Red Channel”, add a central anchor point and drag the upper portion of the curve upward to add a little red to the highlights. That’s about it, Sharpen and save it off. This effect may not be everyone’s cup of tea but I like the resulting image and it was fun to do.

Happy GIMPin’

T.

The installation of the GIMP on a Windows system is very straight forward. However I do remember an issue which arose a few months ago when a friend of mine decided (was persuaded) to try the GIMP. He was becoming frustrated that every time he double clicked on an image file, the image would open in his old editing application and not in his brand spanking new GIMP installation, exactly the same thing happened with my first GIMP install.

This happens because unlike many other applications the GIMP does not steal file associations when you install it. However there are two simple ways around this.

Method 1: (Custom Install)

1. Double click on the Gimp Install file (get it at www.gimp.org) and the select Run. Select Next at the Welcome screen and Next again at the License Agreement screen.

2. At the Ready to Install screen select Customize

3. I usually leave the Installation Destination at the default and select Next. On the Select Components screen I normally leave it at the default again and select Next.

4. And here is where it gets interesting, on the Select File Associations screen scroll down and select all the file types you want to have associated with the GIMP. At the very least you will probably want to select .JPG and .TIFF but see for yourself as you may have other file types on your computer wish you would like to associate with the GIMP. When your done select Next”.

5. At the Select Start Menu Folder screen select Next and at the Select Additional Tasks screen select Next.

6. This bring you to the Ready to Install screen, select Install here and watch it run. JPG’s and any other file types you selected earlier will now open in the GIMP.

Method 2: (Set File Associations in Windows)

If you have already installed and GIMP you can either run the install again, this time selecting the Custom Install as outlined above or you can set the file associations in Windows, to do this.

1. Open Windows Explorer and from the Tools drop down menu select Folder Options…

2. Go to the File Types tab scroll down the list to. JPG and select Change then select “Gimp-2.6” and select OK. If “Gimp-2.6” is not listed select Browse to locate the file Gimp-2.6.exe manually, it is usually located in C:\Program Files\GIMP-2.0\bin\Gimp-2.6.exe

3. Repeat the last step to add any other file types you wish to associate with GIMP and select “Close” to finish. GIMP will now be the default editing application for the file types you selected.

Just a few GIMP related links which may be of benifit, I’ll probobly add more as I come across them

GIMP Homepage http://www.gimp.org/

GIMP Plugin Registry http://registry.gimp.org/

GIMP User Manual http://www.gimp.org/docs/

GIMP Tutorials http://www.gimp.org/tutorials/

GHUJ GIMP Tutorials http://www.ghuj.com/

GIMP Guru Tutorials http://www.gimpguru.org/Turorials/

http://www.gimp-tutorials.com/

Gimpology http://gimpology.com/

Grokking the GIMP http://gimp-savy.com/BOOK/index.html

]]> http://whatsupfilchi.wordpress.com/2008/02/14/just-created-the-header-image-in-gimp-wh/ Thu, 14 Feb 2008 07:16:41 +0000 filchiprogrammer http://whatsupfilchi.wordpress.com/2008/02/14/just-created-the-header-image-in-gimp-wh/ http://digiscrapreview.wordpress.com/2008/02/11/scrapbooks-gone-digital/ Mon, 11 Feb 2008 15:15:45 +0000 Wags http://digiscrapreview.wordpress.com/2008/02/11/scrapbooks-gone-digital/

Scrapbooks Gone Digital is a site that is devoted to digital scrapping using GIMP. GNU Image Manipulation Program, or GIMP, is a raster graphics editor used to process digital graphics and photographs. It is often used as a free software replacement for Adobe Photoshop.

The site has a nice selection of tutorials for digiscrapping with GIMP, a forum, gallery, and a nicely organized poetry section. There is also a shop with a lovely assortment of kits, embellishments, templates etc. If you are scrapping in a “starter” program and would like to have more flexibility without additional cost GIMP may be the right solution for you.

i manily use it for web design related things, i’ve been using photoshop for a long time and know my way with it. but recetnly i’ve started to use gimp.

whats gimp? gimp is a free open source image editing application that works on windows mac and lunix based operating systems, it’s come along way since its original release and with ever version its more user friendly and more powerful.

The Gimp community is getting bigger by the day the fact that its new and good enough to do the casule image enhancing or editing or even designing website layouts, its just playing great, a few of the great gimp tutorial sites out there  are

http://www.gimp-tutorials.net
http://www.gimpolgy.com