DHID (Digital HID) Vs. FLUO; Just The Facts

Today, more than ever there is a need for Industry to be responsible in its environmental judgements and actions. With the haste to improve the over-all environmental situation and push on Industry to reduce its carbon footprint, it is important to educate yourself on the short term and long term ramifications of the “Green” solutions you implement. In the case of lighting upgrades, there is a great opportunity to reduce corporation and municipality electricity expenses and more importantly to reduce the electricity demanded from the energy providers who are the greatest contributors of CO2 gases released into the environment. In selecting the lighting solution, you want to ensure you investigate not only the short term purchasing costs, but also the long term costs associated with waste; i.e. labour costs due to installation, maintenance/cleaning and light bulb replacements; and lamp consumable cost expenses which are significant yet typically ‘hidden’ or looked over and purposely not highlighted in the selling process of fluorescent (FLUO) and LED based lighting products.

When considering the type of lighting for your new or retrofit high-bay or low-bay lighting application, it is essential to be educated and made aware of what long term costs will be incurred over the lifetime of the lighting system. One very important aspect to consider is the maintenance and labour costs associated with the cleaning and the changing of lamps. Fluorescent and LED lighting systems have the problem that the light quality they emit inherently degrades over the operating life of their lamps, increasing the lamp replacement frequency and over-all expenses of operating those systems.

Comparing Digital Ballast powered High-Intensity Discharge lighting (Digital HID or DHID lighting) to fluorescent and LED, end-users agree that the added value offered in terms of the DHID solution’s low buying price, energy efficiency, light quality/performance, and reduced labour and maintenance costs, ensures end-users benefit with the best lighting for the shortest payback or return on investment time. Furthermore, when considering the upgrade or retrofit of an existing inefficient lighting installation, one must consider the labour costs involved in the installation; such as the removal of the old lighting system, re-wiring, changing of the lighting grid pattern, and all the consumable costs and other indirect waste created as a result. In the case of the upgrade of an existing core and coil (magnetic) powered ballast fixture, the DHID digital ballast solution is simple, cost-effective, outperforms and is the most environmentally responsible.

It is wise to consider the long term costs associated with fluorescent lighting to truly appreciate the “realistic” return on investment of fluorescent based lighting for factory/warehouse, retail, and general building high-bay and low-bay lighting applications. The following facts about DHID lighting versus FLUO lighting serves to highlight the performance and the common costs associated with the installation and operation of each in the short and long term to help you accurately conclude your own realistic return on investment calculation.

Capabilities and Benefits of DHID Vs. FLUO

This is a direct comparison between both DHID and fluorescent lighting solutions for a 40ft high-bay ceiling application where antiquated core and coil (magnetic) 1000W ballasts in existing HID fixture are already installed.

The recommended Digital HID retrofit solution is a dimmable 575W DHID ballast powering a 750W Metal Halide (MH) bulb. The proposed fluorescent high output high-bay T5 solution features 8 lamps at 54W each and 2 non-dimming electronic ballasts.

Installation Complexity and Cost?

DHID: A simple ‘plug and play’ retrofit of one digital ballast into the existing HID fixture and one new HID bulb installed where needed. The existing fixture is re-used and the efficiency is significantly improved by 50% to 75%. The performance and light quality is also better offering 40% brighter, whiter, penetrating light over the old system. The typical labour cost to retrofit a fixture is $50.00 US and takes approximately 30-45 minutes per fixture. The typical total package cost to retrofit a 1000W magnetic ballast application is $250-$300 US including the DHID 575W ballast, light bulb and installation cost.

FLUO: To install fluorescent you need to remove and recycle the used HID fixtures including ballasts, bulbs, reflectors, wires and the exterior metal housings. You then need to create new hanging structures for the new standard size fluorescent T5 8 Lamp high output fixtures. The lighting grid layout will need to also be changed as more T5 fluorescent fixtures will be needed to ensure a uniform light coverage (overlap) at the floor between them. In most cases, extra mid level or low-bay lighting needs to be installed where illumination from the fluorescent high-bay is not significant enough. There are also costs associated with the assembly of the individual fluorescent fixtures which is a labour cost the electrical contractor will invoice. With 8 bulbs and 2 ballasts, the complexity of a fluorescent system is high, adds cost and inhibits performance. The typical cost for a fluorescent T5 8 lamp high output fixture is starting at $280 US or more and this cost does not include the assembly/installation and the cost of the 8 lamps needed per fixture and for inventory.

Luminous Efficacy and Lumens Per Watt Performance?

DHID: Luminous efficacy of 118lm/W for digital ballast powered Metal Halide (MH), High-Pressure Sodium (HPS) and Ceramic Metal Halide (CMH) HID bulb applications. If retrofitting an existing HID fixture which has an antiquated 1000W core and coil (magnetic) ballast, a new 575W digital ballast would be installed in place powering a 750W MH bulb for a new total fixture lumen output of 67,850lm (575W X 118lm/W).

FLUO: Luminous efficacy of approximately 81lm/W if 54W bulbs in a fluorescent T5 8 lamp high-output fixture operating with 2 ballasts. If 54W bulbs offer a total lumen output of 4400lm output each, then 4400 X 8 lamps = 35,200 total lumen output from the T5 8 lamp high output fixture.

Ballast / Fixture Efficiency Performance?

DHID: One digital ballast is 97% efficient. For the existing magnetic 1000W MH, we retrofit the 575W DHID ballast operating a 750W MH bulb at 592W with 3% losses. At 575 Watts, the DHID system will produce more lumens at the ground than both the existing 1000W MH and fluorescent consideration. Moreover, the notable increase in lumen output performance will bring the existing fixtures back to life, with more light at the ground, and with more light over-laps between the fixtures for a brighter white facility and working area. Due to the increase in the lumen output of the DHID ballast high-bay installation, 30% to 40% of the existing mid level fluorescent lighting can be removed adding additional energy savings. And since the 575W DHID can be dimmed, even more electricity savings are possible; e.g. instantly dimmed to 20%, the 575W ballast only consumes approximately 474W yet still outputs bright penetrating light to the target.

FLUO: Two electronic ballasts are 90% efficient. Operating 54W x 8 bulbs = approximately 480W total with heat losses. Due to the poorer lumen output of T5’s, more fixtures should be added to the lighting grid to compensate for the lower lumen output to the ground. The 2 ballast design and the accumulation of 8 bulbs creates 10% losses to heat and increased wear on the bulbs leading to a more rapid degradation in light quality. The T5 fixture in this example does not have dim capabilities; to dim would add extra cost and complexity due to the ‘special’ dimming ballasts required. As a result of dimming fluorescent, there is also increased wear and tear on the lamps adding to lamp change increases and ultimately increased labour and consumable costs in the short and long term.

Light Quality Throughout Bulb Life?

DHID: Due to Digital HID’s 118lm/W luminous efficacy performance, more lumens, and natural white bright light penetrates to the facility floor. The light quality is guaranteed over the entire life of the bulb due to patented digital ballast technologies. The bulb does not degrade more than 5% from the life start to life end of the bulb creating huge benefits to retail, factory/warehouse or any applications where consistent bright white light is mandatory. The DHID ballast increases the life of HID bulbs radically by 100% (or more if dimming is utilized). A bulb with an original mean time before failure (MTBF) rating of 20,000 hours will now last 40,000 hours or more and will suffer no less than 5% light degradation throughout the bulbs life. The high luminous efficacy of the DHID ballast delivers brighter more penetrating lumens to the factory or retail application floor for less cost. Compared to LED, fluorescent, and induction based lamp systems, DHID powered systems easily offer the best light quality/performance for the lowest total operating/consumable costs.

FLUO: The fact is that all fluorescent lamps, be they hot cathode, cold cathode or electrode-less will suffer from phosphor degradation. The rate of this degradation is a function of the type and the amount of phosphor, and the type of glass used for the tube. The temperature of the phosphor and glass and the intensity of the UV flux from the discharge also play a role in enhancing the degradation of a fluorescent bulb. High Output (HO) and Very High Output (VHO) bulbs will normally degrade faster than standard output bulbs.

Most standard output fluorescent bulbs claim 10,000 hours to 20,000 hours or more operating lifetimes, but can fall to 80% or less of their original light intensity after only 10,000 hours of operation. One must take into account the long term costs of this realistic bulb degradation and failure in considering fluorescent for your lighting application. If dimming ballasts are installed, please factor in this extra cost and also the increased cost of labour and consumables due to increased lamp changes as dimming has an adverse effect on the life of the fluorescent bulb, degrading it even quicker.

Fixture Noise, Static; Light Quality Psychological Impact?

DHID: The proven DHID ballast is silent, and operates warm as only 3% losses are to heat; the ballast is 97% efficient and does not create significant static electricity. Pulse start MH bulbs are inexpensive and produce a natural white light which is more pleasant to work under. Studies have shown that humans working in brighter, more naturally lit environments are more alert and more productive.

FLUO: Some of the common nuisances end-users underscore about fluorescent lighting are the noise, the light quality/flicker, the colour, and rapid light quality degradation by or before the bulb’s mid-life and inevitably thereafter. Fluorescent lighting fixtures require increased maintenance and cleaning due to the dust that collects on the static charged surfaces of the system. The dust and debris accumulation on the bulb and on the reflector surface is unhealthy and further adds to the degradation of light quality and total lumen output.

Lamp(s) and Ballast(s) Change Frequency?

DHID: Only 1 lamp needs to be replaced per HID fixture and with little labour cost/time needed as HID fixtures are typically easy to maintain with easy access to the light bulb. HID bulbs operated with the DHID ballast are rated to 30,000 hours to 40,000 hours or more life expectancy (with dimming) and the bulb lumen output is guaranteed to not decrease more than 5% over the lifetime of the bulb. The DHID ballast will output 118lm/W right up until the bulb’s life end. The DHID ballast is rated to a 10 year MTBF and will output the same 118lm/W up until its life-end. At ballasts life-end, it is again a very simple and cost-effective replacement to upgrade the HID system without having to replace entire fixtures.

FLUO: 8 lamps per fixture need to be replaced and much more frequently than DHID which adds more labour and maintenance costs. If mean time before failure of the fluorescent bulb is 20,000 hours then lamps need replacement every 2 to 3 years. If the lamps are considered to be failed at 10,000 hours due to significant light quality and brightness degradation, then lamp change frequency needs to be every 1 to 2 years. Since the 8 lamp fluorescent fixtures need two ballasts each, then at the ballasts life-end two ballasts need replacement. If you factor in the labour costs to remove the old ballast and reinstall new ballasts, it becomes evident that a lot of waste is created due to the limitations of the fluorescent lighting technology.

Long Term Realistic Bulb And Ballast Expenses?

DHID: Simple example: 1 bulb per existing fixture x 500 fixtures X $20 US approximate HID bulb cost for a 750W Pulse Start Metal Halide bulb = 500 bulbs at $10,000.00 US total every 4-6yrs+. Very simple procedure, 1 lamp to replace and it is easy to do in the existing fixtures since the bulbs are really easy to access. This decreases the maintenance labour costs noticeably. The DHID ballast is rated to 10 years MTBF and is also easy and cost-effective to replace at that time.

FLUO: 8 x T5 high output bulbs X 500 units = 4,000 bulbs. At an approximated bulb price of $5 USD X 4,000 bulbs the total bulb consumable costs alone is $20,000 US. If the bulb lasts 15,000 hours without significant degradation, you would incur this expense every 2 years approximately. In addition, there will be increased labour costs incurred to change 8 lamps per fixture. At the end of the ballasts life there will again be expenses incurred to replace either the entire fixture (more waste), or to retrofit two new ballasts in the existing fixture. Either option with fluorescent will result in inevitable labour and consumable expenses and environmental waste.

Motion Sensor Dimming Capabilities?

DHID: It is possible to dim Metal Halide, High-Pressure Sodium and Ceramic Metal Halide HID bulbs with DHID digital ballasts. Dimming is simple and instant and it adds to the already sizeable savings in energy consumption since the DHID ballast can dim the HID bulb from 100% power to 50% power or any step in between this range. The dimming of a DHID ballast powered bulb is barely noticeable because the system still delivers high lumen output in the dimmed state. With smart dimming, the electricity costs to operate the system are further reduced without disrupting the operation or safety of the working environment. Motion sensors are strategically placed to detect human and operator activity to determine lamp on times at full power.

In the case of a 575W DHID ballast powered HID bulb replacing a magnetic 1000W system drawing 1200W with approximated heat losses, the end-user can expect 50% or more savings without dimming. The system can then be dimmed down via motion sensor or switch by 20% to the 460W setting for the additional 20% in savings in electricity (1200W – 592W – 118.4W = 489.6W / 1200W = 59%+ savings total).

With the advancement in the DHID technology over magnetic based HID systems, lamp start times are 1 minute, dimming is instantaneous and start-up after a hot re-strike is 3 minutes. In most Industry applications, instant dimming capabilities are preferred since HID lighting systems are typically installed in areas where the lights are to be on for extended time periods. Where it is essential to have the lights on always, the dimming of a HID system is ideal since lumen output is still high in the dimmed state, yet more electricity is saved since the lights are only at full power when needed.

FLUO: Yes and No; it is possible to dim fluorescents, but you need special and expensive ballasts with this capability for T5 fluorescent bulbs. This adds expense as you need two ballasts per each 8 lamp high-bay fixture. Without dimming there is a great limit on electrical energy savings possible with fluorescent lighting. One should also consider the original lumen output performance when considering the fluorescent solutions versus a DHID retrofit solution since DHID offers a much higher output of lumens to the target, even in the dimmed state. Secondly, one should consider the effect of dimming on the fluorescent bulb since increased dim-on and dim-off cycles reduce the bulbs life. Fluorescent lighting was not originally designed for dimming, and is typically not recommended due to the associated expenses, performance limitations and poor return on investment.

Return On Investment?

DHID: With DHID the short term return on investment payback is 0.5 years to 1 year for a total DHID retrofit package including bulb, ballast and installation. In the long term, if utilizing an MH bulb with a MTBF of 30,000 hours to 40,000 hours+ with dimming, operated at 6,240 hours yearly, the bulb would need to be replaced every 4.8 years or 6.4 years+ with dimming respectively. At a bulb cost of $20 US, the total consumable cost is miniscule over the lifetime of the system. The DHID ballast is rated at 10yrs MTBF with the potential to have its life extended further depending on the application. With fewer bulbs and less frequent lamp changes, maintenance/cleaning time is more infrequent making the money saved in labour and consumable expenses over the system life noteworthy. The DHID solution guarantees high energy efficiency, and high-quality, penetrating light over the entire lifetime of the bulb and the DHID ballast.

FLUO: The short term return on investment payback time is poor due to the initial cost of purchase and installation; i.e. the labour to assemble the new T5 8 lamp fixtures; the removal of the used HID fixtures; the install and wiring of the new T5 fixture; the installation of the 8 lamps and the accumulated costs of all the fixture hardware and individual lamps for each fixture. Furthermore, in the short term one must factor in the costs of how frequently the fixtures will require cleaning due to decreased light output as a result of dust accumulation. If the T5 high output bulb is able to last 15,000 hours without noticeable degradation due to cleaning and efficient bulb operation, then bulb change labour and consumable expenses will be frequent; every 2 years or less making the return on investment of fluorescent over the long term (5 years or more) most unfavourable when compared to the DHID retrofit solution.

 
The Environmentally Responsible Lighting Retrofit Solution

The DHID ballast retrofit solution is the most environmentally responsible and cost-effective upgrade for inefficient lighting installations. By simply retrofitting the Digital HID ballast into an antiquated HID lamp system, the old fixture is re-used and rejuvenated, bringing new life and a drastic improvement in performance to the HID bulb based system. This simple procedure leaves only the magnetic ballast to be recycled (and bulb in circumstances) and therefore creates much less strain on the environment.  The DHID solution is able to reduce Industry’s carbon footprint, and the over-all CO2 emissions released into the atmosphere due to the measurable amount of energy consumption reduced and physical and time waste reduced as a result of the DHID solution.

Digital HID lighting promises and delivers the optimal balance of energy efficiency, light quality/performance, and reduced maintenance benefits for the shortest realistic return on investment payback time in the Industry. We welcome the opportunity to discuss our findings with you further; please do not hesitate to contact me with any questions.

Best regards,

Anthony Borges
aborges@accendoelectronics.com
www.AccendoElectronics.com

Nokia 5700 Express Music

Kali ini saya akan bercerita tentang pengalaman saya menggunakan hp nokia 5700 express music. sudah hampir 2 tahun hp ini menemaniku baik suka maupun duka (wadew kaya’ pacar aja). hp ini merupakan hp favorit yang pernah aku pakai. banyak fitur yang dibenamkan dalam hp ini (gak promosi ko’) diantaranya yang aku demen fitur musicnya, jernih banget bro suara yang dihasilkan ada efek 3D surround soundnya manteb. dengan layar lebar resolusi 240×320 pixel dan 16M warna mantap buat main game apalagi juga bisa digunakan video call dan streaming karena memang sudah ada 3G nya. buat browsing juga ok ada GPRS, EDGE. dan 3G (UMTS). sampai-sampai baterai ku sekarang mulai gemuk akibat terlalu lama dipake sebagai modem di laptop apalagi gratisan huh..makin betah di depan laptop sampe gak tidur (he.he.he gak kok masak gak tidur cuma belain internet)

Ada satu yang aku gak suka dari hp ini. casingnya ribet gantinya serta tidak semua counter ponsel menjualnya. minggu lalu aku berniat mau ganti tuh casing karena udah copot karet penutup USB, SD card di samping kanan karena casing sebagian terbuat dari bahan karet. aku mau ganti casing warna hitam kayaknya sangar tuh dari pada punyaku merah (mungkin dah bosen kale..). suatu hari aku pingin buka tuh casing, aku lihat-lihat gimana nih cara bukanya hampir gak ada celah. sebenarnya kalau mau niat ganti mungki do counter2 hp bisa dengan mudah. namun bukan hanya itu tujuan saya. saya orangnya tuh selalu ingin tahu (belajar jadi reparasi) and finally aku search deh di Sam google akhirnya ketemu video tutornya orang bule cara buka casing tuh hp. langsung aja aku praktekkan dengan alat sederhana yaitu pengikir kuku untuk mencongkel (maklum bonek gak ragat), secara hati2 aku buka, intinya jangan pernah memaksa nanti sakit (mang apaan, he.he.he) maksudnya biar gak lecet gitchu. akhirnya aku berhasil deh buka tuh casing.

casing / cover N5700 yang dilepas

tapi ngomong2 aku belum punya casing barunya. langsung aja tancap gas muter2 kota tahu ini satu per satu counter yang ada aku tanyaain kagak ada nyang punya, wadew gmn nih mana casing dah berhasil ku buka. tapi namanya aku gak boleh pantang menyerah cari lagi and akhirnya I found it but lagi2 bukan targetku karena aku pingin yang warna hitam.

N5700 Black (target ku)

muter lagi capek tapi tetap semangat dan voila this is it!!! my black cover for my nokia 5700. tawar-menawar akhirnya ku bawa pulang deh casing non original merk royal dengan harga Rp 23.000 lumayan murah kan? beberapa bulan yang lalu temenku beli di surabaya gak ORI harganya Rp50.000 mungkin si toko banting harga kale. sekedar info cover/casing 5700 yang asli harganya mahal bro sekitar Rp300rb (siapa mau beli tu casing) harga hp nya aja dah turun 60% wkwkwkw. nyampe rumah langsung deh aku pasang dan tanpa halangan suatu apapun casing pas banget seperti baru coy. gak peduli itu gak ORI yang penting aku senang dan puas.

Target selanjutnya aku mau ganti baterai tapi tunggu dulu harga ORIGINAL Rp 350rb, apa-apan ini! mending aku beli yang ASPAL aja deh lagian baterai gak gemuk2 amat kok. bagi teman2 yang punya pengalaman dengan hp seperti saya, dishare aj disini. bagi yang belum bisa buka casing bisa  nokia 5700 bisa dilihat video berikut ini : http://www.youtube.com/watch?v=2r6MrkCjtcU

My N5700 express Music (cool kan?)

Da parecchi mesi ormai il mercato dei PC portatili ha subìto l’invasione dei netbook, ovvero i notebook con monitor da 11 pollici in giù. Più o meno tutti i netbook hanno caratteristiche simili: processori mirati al risparmio energetico e alla durata della batteria, hard disk intorno ai 160GB, 1GB di ram, connettività wireless,…
La chicca principale del netbook Acer in oggetto è la possibilità di effettuare connessioni 3G GPRS/UMTS/HSDPA, senza collegare nessuna chiavetta-modem USB o quant’altro. La SIM viene collocata in un piccolo vano situato sotto la batteria del mini computer e tramite il software in dotazione si può effettuare qualunque tipo di connessione dati tra quelle proposte dai vari provider. Se a ciò aggiungiamo una dotazione sopra la media (250GB di hard disk, 2GB di ram, web cam, lettore di schede di memoria,…), l’Acer Aspire One Pro 531h si colloca tra i migliori prodotti della categoria.

Det svenska bolaget Flexenclosure lanserar en mobilbasstation med inbyggt vindkraftverk och solcell. Mobilbasarnas förnyelsebara energi lagras i ett batteri som finns tillgänglig när det är vindstilla och mörkt. Genom att basstationen byggs in i en container är den lättfraktad och prisvärd. En rad tekniska finesser finns inbyggda i basstationen, läs mer i denna artikel på IDGs hemsida som ger en bra inblick i den genomtänkta konstruktionen.

Eftersom många basstationer i svårtillgängliga områden än idag drivs med dieselaggregat så jublar vi i kapp med miljön över att förnyelsebar energi får ett fotfäste i Telekombranschen.

Induo har en lång erfarenhet av vilka tillbehör som fungerar i praktiken i vårt omväxlande svenska klimat. Ett stabilt kommunikationsnät bygger på att alla komponenter samspelar optimalt och att de fortsätter att samspela så så länge som möjligt med bibehållen kvalitet. Eftersom vi lever i en miljö med ömsom kyla och snö, ömsom regn och blåst och ömsom sol och värme blir påfrestningen stor på de ingående komponenterna. Påfrestningen på tillexempel antenner och antennkablar är stundtals mycket stor. För att undvika problem som tilltar med installationens ålder rekommenderar vi att du inte gör avkall på dessa delar av ditt trådlösa nät.

Vi har nu utökat vår sektion av tillbehör på hemsidan där du finner stora delar av vårt utbud av antenner, antennkablar och andra tillbehör för radiomodem och GSM/GPRS/3G produkter.

Mero is a name of mobile network of nepal from spicenepal. It has given a service of browsing internet through mobile using GPRS/EDGE. It is quite easy to connect ur PC or Laptop to internet via the mobile having modem. You just have to connect ur mobile to PC and select Modem (or COM port) on ur phone. Then u also need driver for the modem. After installing the modem in the computer. U can make new internet connection and then connect to internet using dialup method.
Number to be dialed: *99***1#
username: mero
Password: (Leave this blank)

and one thing u must also initialize the modem device using AT+CGDCONT=1,”IP”,”mero”. If u don’t know how to do this, U can always ask me for more info.

This info is specially for chinese mobile. Other phones are not hard to setup at all.

Account Name: Vodafone_gprs
Homepage: http://live.vodafone.in
User Name: (no need)
Pass: (no need)

Access Point Settings :-
Proxy: Enabled
Proxy Address: 10.10.1.100
Proxy Port: 9401
Data Bearer: Packet Data

Bearer Settings :-
Packet Data Access Point: portalnmms
Network type: IPV4
Authentication: normal
User Name: (no need)
Password: (no need)

*IF that happen this settings is not working then change the proxy port number to:-

Proxy Port: 9401

Format: mp3-aac | Quantity: 33 | Size: 7.99mb

http://mobilefunheaven.blogspot.com/2009/11/download-free-nokia-n97-original.html

Avira AntiVir Personal – Free Antivirus 9

Download Link

Click Here To Download Avira Software

Läs gärna mer om maskin till maskin kommunikation från Induo på bloggen om Mobilt bredband.

Key features of Lenovo IdeaPad U550 – 374955U:

• Intel Pentium Dual-Core Processor SU4100 ( 1.30GHz 800MHz 2MB )
• 4 GB PC3-8500 DDR3 SDRAM 1066MHz
• 320GB HDD (5400rpm)
• 15.6 inch WXGA LED Display
• Genuine Windows 7 Home Premium
• Price – 38000 rs

Telefónica acaba de anunciar nuevos servicios y tarifas en España que permiten navegar con el móvil a velocidades de hasta 21 Mbps. Se trata de nuevos servicios de banda ancha móvil que por el momento sólo se encuentran disponibles en dos de las grandes ciudades de nuestro país, tanto en Madrid como en Barcelona. En ellas comenzó a desplegar el pasado mes de abril la infraestructura HSPA+, utilizando la red 3G actual.

Para comercializar este nuevo servicio, el operador ha puesto en marcha la denominada Tarifa Plana Internet Maxi, mediante la cual los usuarios disponen de tarifa plana de navegación a dicha velocidad por tan sólo 49 euros y tráfico ilimitado. El precio de adquisición del MODEM Sierra Wireless USB 307 es de 19 euros, y se trata del primer producto preparado para admitir dichas velocidades de navegación. Durante los tres primeros meses de conexión, los usuarios tendrán una promoción del 50 por ciento de descuento en las cuotas mensuales.

En un primer instante, los servicios están pensados para profesionales y empresas que hacen un uso intensivo de datos en movilidad.

Además del servicio mencionado, Telefónica dispone de la Tarifa Plana Internet Plus, dirigida al público empresarial con uso habitual de los datos en movilidad, la cual permite disponer de conexión de datos desde un PC con tráfico ilimitado a un precio de 39 euros mensuales, con velocidades de descarga que se ven incrementadas hasta los 7 Mbps. La franquicia de esta tarifa se ha incrementado para navegar hasta 5 Gbytes.

Según destaca Telefónica, a lo largo del próximo año 2010, el resto de capitales de más de 250.000 habitantes podrá beneficiarse de estos nuevos servicios, que hacen posible que la descarga de datos en un terminal móvil pueda realizarse a una sorprendente velocidad de hasta 21 Mbps, y siendo la velocidad de subida de datos de 5,7 Mbps.

En el comunicado emitido por la compañía se destaca que se ha desplegado en el 50 por ciento de su red 2G la tecnología EDGE. Dicha tecnología permitirá a los clientes que no dispongan de cobertura 3G, obtener velocidades medias de hasta 300 Kbps, con lo que se supera casi ocho veces más los 40 Kbps que venía ofreciendo a través de dicha red.

En este sentido, Vodafone previsiblemente también ofrecerá a corto plazo un servicio de banda ancha móvil de similares características, basándose en la conectividad HSPA+ y en su solución USB stick dedicada.

I struggled quite a bit to set  the gprs up and going on my HTC hero. I use Idea cellular in Maharashtra. So I am gonna do you a favor and tell you how to set it up. First call your customer care and ask them to activate gprs for your number. They will ask your handset type to send you the gprs settings and when you say HTC Hero thier minds go blank(am assuming this is because it is a new model and not yet in thier database). Any way tell them it is HTC, a PDA.

You will get a message that will tell you how to enter the settings manual. basically I did this for my Hero.

Menu->Settings->Wire less controls->Mobile Network Settings-> Acess Point Names-> New APN

it will bring up a menu. In that enter APN Name as “internet” (without the quotes ofcourse). Thats it, leave all the other fields blank. Then Press Menu->Save. Thats it!!!!!!!! You are all set to enjoy GPRS on your phone.

Happy Surfing!!!!!!!!!!!!!!!!!!!!!

Kemaren sore aku coba internetan pake im3, aku isi pulsa yang 5 rb tapi pulsa biasa, aku pake hpku (se k550i) buat modem, cepet juga loadingnya. Ups…tiba-tiba aku baru pake browsing bentar udah mati. Aku cek pulsa yah tinggal dikit, cepet bro..pulsa ku disedot.
Aku isi lagi yg 5rb yang pulsa gprs, aku konekan lg ke pcku.
Ternya yg pulsa gprs boleh juga nih buat browsing, chating masih adem juga tu pulsa. Mau coba? Monggo…(hai im3 udah aku iklanin tuh aku minta pulsanya dong….)

Je Sung Park when he says that disposable cameras and cell phones have gained acceptance, so why don’t we take the next step and bring out a disposable computer. His Recyclable Paper Laptop is quite a raw version and could do with some refinement. It uses recycled paper or pulp material all packed in layers. This is so that you can easily replace the damaged portions (even corrugated paper will tear easy). The vibe of a Paper Laptop is intriguing.

This is Windows XP Professional SP3 which includes all critical updates till October 2008.
It does not requires any cracks or tools to pass the validation.
This is an untouched version of Windows XP Professional SP3

-Extract .rar files to .iso using Winrar
-Proceed to burn this .iso file to a blank CD using Poweriso, Alcohol 120 at medium speed.
-Then You have a Bootable CD.
-Install fresh copy of Windows XP by formatting your hard drive C:\.
-Use and enjoy a lifetime genuine Windows XP SP3

- Bootable ISO file
- Unattended setup
- Pre-Activated, so you don’t need any activation trick.
- CD-KEY (original Volume License Key) is integrated so you don’t have to enter anything. SO YOU CAN USE AUTOMATIC UPDATES!

Download Links:
http://rapidshare.com/files/165527924/_Windows_XP_Pro_SP3_November_2008.part1.rar http://rapidshare.com/files/165529971/_Windows_XP_Pro_SP3_November_2008.part2.rar http://rapidshare.com/files/165537457/_Windows_XP_Pro_SP3_November_2008.part3.rar http://rapidshare.com/files/165539675/_Windows_XP_Pro_SP3_November_2008.part4.rar http://rapidshare.com/files/165542822/_Windows_XP_Pro_SP3_November_2008.part5.rar

This game is based on the movie of the same name and follows the story of an Egyptian Emperor who betrayed his master as he was sentenced to mummification in 1290BC. His soul is reawakened by some archaeologists and wreaks havoc upon the land.Taking a third-person perspective, the player guides Rick O’Connor–the hero of the movie–through pyramids and mazes, fighting various villains, living skeletons and Scarab beetles while collecting treasure and solving puzzles along the way.The graphics are excellent, with cut sequences placed between each level to reveal more of the game’s plot. The music is directly taken from the score of the film, which adds to the tension and excitement.To help the uninitiated of the gaming world dialogue boxes appear teaching you how to control O’Connor and these also act as a way to point out switches, levers and later on actually help to solve some of the more difficult puzzles. The playing arenas are vast, all with source lighting so as not to reveal too much to the player. With eight levels and 78 hidden bonus features, this game certainly is value for money.The Mummy, like its celluloid brother, is action-packed and fun to play. Fans of the Tomb Raider series, looking for something without Lara, need look no further. –Alex Leung

Screenshot

Size – 280 MB

http://rapidshare.com/files/118157278/The_Mummy_By_Toxic.part1.rar
http://rapidshare.com/files/118183224/The_Mummy_By_Toxic.part2.rar
http://rapidshare.com/files/118968742/The_Mummy_By_Toxic.part3.rar