Blogs about: Ip Services
Featured Blog
NAT Virtual Interface
IEWB1 Ver5 Task 13.29 Configure NAT on R5 without using any ip nat inside or outside command, so that traffic source from VLAN8 on SW2 is seen as being sourced from 155.1.188.0/24. Configuration R5# i… more →
Cisco Notepad
Nat notes from the doc cd
Peter Kurdziel wrote 5 months ago: Determine how you will use NAT and how NAT will need to be configured. 1. Define NAT inside and outs … more →
Enabling Syslog for Logging NAT Translations
Peter Kurdziel wrote 5 months ago: Enabling Syslog for Logging NAT Translations SUMMARY STEPS 1. enable 2. configure terminal 3. ip nat … more →
Network Convergence
sysfreek wrote 7 months ago: Network Convergence • Administrators of AS 200 want to ensure fast convergence for the BGP routing e … more →
VRF example - 6 hosts with the same IP address
Peter Kurdziel wrote 9 months ago: Solution =VRF/NAT ! version 12.4 service timestamps debug datetime msec service timestamps log datet … more →
Lab 9 Task 4.8 Problem Identified
brentleekley wrote 10 months ago: … more →
Using Extended Access-Lists In A Distribute-List
Peter Kurdziel wrote 11 months ago: - Using distribute-list with extended ACL is a bit tricky, as different routing protocols may interp … more →
Unicast Reverse Path Forwarding
brentleekley wrote 11 months ago: Tier-2 Explanation: As a mechanism for mitigating Denial of Service attacks, Unicast Reverse Path F … more →
DRP
brentleekley wrote 11 months ago: Tier-2 Explanation: Gap analysis on this topic was a zero. The DistributedDirector feature set/Appl … more →
Mobile IP - Introduction
brentleekley wrote 11 months ago: These are my notes on the topic. I’ve never configured this before… Mobile IP is compri … more →
Intro to Network Address Translation
brentleekley wrote 11 months ago: IOS 12.2-> Configuration Guides-> IP Configuration Guide-> IP Addressing & Services- … more →
Configuration Change Notification and Logging
brentleekley wrote 11 months ago: OS 12.4->Configuration guides-> IOS Configuration Guide->Managing configuration files->C … more →
NAT Virtual Interface
enotepad wrote 1 year ago: IEWB1 Ver5 Task 13.29 Configure NAT on R5 without using any ip nat inside or outside command, so tha … more →
TCP Load Distribution with NAT
enotepad wrote 1 year ago: IEWB1 Vol5 Task 13.26 Configure R5 so that when SW2 telnets to the IP 155.1.58.55, it is redirected … more →
NAT for overlapping networks
enotepad wrote 1 year ago: IEWB1 v5 Task 13.25 R1 and R2 both have a new loopback1 with IP address of 10.0.0.0/24. Configure R1 … more →
Static NAT and NAT order of operation
enotepad wrote 1 year ago: IEWB1 v5 Task 13.21 Topo: R4 ------------ R5 ------------- SW2 155.1.45.0/24 155.1.58.0/24 The … more →
IRDP - ICMP Router Discovery Routing Protocol
enotepad wrote 1 year ago: This is a less well-known First Hop Redundancy protocol, as compared to HSRP, VRRP, and GLBP. It is … more →
DHCP for PPP Link (revisited)
— 1 comment
enotepad wrote 1 year ago: Another caveat found today, in relation to the topic posted previously. http://enotepad.wordpress.co … more →
Why can't I ping btw different IP subnets on same VLAN!
enotepad wrote 1 year ago: I came accross an interesting question, where we have a two routers, on the same VLAN, but are confi … more →
DHCP For PPP Link
— 1 comment
enotepad wrote 1 year ago: I came accross an weird issue today when practicing Vol2 Lab 13, Task 2.3: The R4 Serial interface w … more →
