WordPress has a seasonal add-on that shows “snow” falling across our blogs. I displayed it last year – it’s optional – and except for one curmudgeonly sod who moaned about it, I though it was a success, so I ran it again this year.

Over the last few days, though, I’ve noticed that my PC occasionally gets very slow, especially, with hindsight, if I’m publishing or editing posts.

A small app, called StatBar, shows something is hogging near 100% of my processor capacity, and pulling up Task manager confirms that, and shows that Firefox is responsible for sucking up upwards of 75% of processor capacity, instead of a normal 3-10%).

I’ve buggered about with various things but nothing works permanently, though restarting the browser is a temporary fix (luckily, Firefox can be set to restart exactly where you were).

A few minutes ago, things got grindingly slow again, and restarting the browser didn’t do anything – and I was in the middle of publishing a post. Then I noticed, even on the new post page of WordPress, the snow’s there. I don’t recall it being on the admin pages last year (if you know, please post a comment).

WordPress say it – the snow – may have a detrimental effect on older, slow machines, but mine’s a few months old, running XP with 2.25 gigs memory (2 RAM, the rest graphics), and a 2.8MHz processor, so while it’s not cutting edge, neither is it exactly sluggish.

So I turned off the snow. Bingo! Problem solved.

So, if you’re a WordPress user, and your machine is suddenly sluggish, turn off the snow.

Hmm… I’ve juist looked at the WP News page. My own Stats page was showing 1-3% processor usage, but clicking through to the snowy News page drove it up to 75-80% (yes, I know that can happen with page transitions, briefly, but this stayed at that level until I returned to my own snow-free page).

The implications for this are pretty bad news, as not only are WP members’ machines potentially adversely affected by snow, it can affect everyone who views a WP page – so anyone viewing a WP blog could come unstuck. Not going to make us very popular.

But, as I said in my post in the snow thread on the WP forum, there was no problem last year, so why this year?

Ist das nicht immer so, wenn man alles ein wenig nach Plan und halbwegs gut läuft? Wird man nicht immer wieder mit irgendwas gedeckelt?
Ist McMurphy denn wirklich überall?
Was schief gehen kann, wird nämlich auch daneben gehen. Jawollja und ich bin mal wieder zum Opfer geworden.
Leider sitze ich nämlich gerade gar nicht an meinem geliebten Lappi, der musste nämlich gestern den Geist aufgeben. Ich war gerade dabei mein iTunes zu starten, dass erste Lied wurde kurz angestimmt… dann Dunkelheit. Ich, nichts Böses ahnend, fahre meine Herzstück wieder hoch.
Schockmoment: winload.exe ist beschädigt oder nicht vorhanden.
ich kann in keinem Modus auf meine Dateien zugreifen(meine ganze Musik und meine ganzen Bilder T.T) und so wie ich das sehe, kann ich nichts tun, außer alles auf Anfang zu stellen. Es sei denn jemand hat einen anderen Vorschlag. Wenn es um sowas geht habe ich nämlich absolut keine Ahnung mehr… Ich hoffe, dass ich hier einen Crack auftreiben kann, ansonsten ist viel verloren gegangen.
Habe vor gut einem Monat alle Daten auf meine Externe gespielt, aber seitdem ist auch wieder sehr viel dazu gekommen.

Womit hab ich das nun schon wieder verdient… -.-

(Song: Roger Cicero – Murphys Gesetz)

PC Virus & Malware Removal

There are literally hundreds of viruses out there on the internet. Computer viruses act the same as biological viruses do in many ways. Usually they enter through an email program. Once inside your system they multiply and destroy your valuable data, and cause all kinds of software issues that can crash your system. Ads come from companies wanting to sell you something. Usually their programs enter your system from downloading files or responding to pop up ads. PC’s get viruses & malware and Mac’s don’t because 99% of all viruses out on the Internet target Microsoft operating systems. There are simply more PCs in use than Macs.

Whatever virus your computer has been injected with – we can cure it. Since virus removal is our most requested service; we rarely come across something we haven’t seen before.

Our number one requested service throughout our service area. Rest assured “We will remove all viruses in your system, including any that might have attached themselves to your data” – guaranteed!

We can restore order to your system!

1. We will remove all viruses in your system, including any that might have attached themselves to your data.
2. We will install virus software that is up to date, & will update itself – keeping your system safe.
3. Your system will be virus free.
4. We will remove all advertising company software from your computer.
5. We will install effective pop-up software that WILL stop the ads from coming again.
6. We will install software that will protect you from future viral invasions.

Fatal error: the system has become unstable or is busy,” it says. “Enter to return to Windows or press Control-Alt-Delete to restart your computer. If you do this you will lose any unsaved information in all open applications.”

You have just been struck by the Blue Screen of Death. Anyone who uses Mcft Windows will be familiar with this. What can you do? More importantly, how can you prevent it happening?

1 Hardware conflict

The number one reason why Windows crashes is hardware conflict. Each hardware device communicates to other devices through an interrupt request channel (IRQ). These are supposed to be unique for each device.

For example, a printer usually connects internally on IRQ 7. The keyboard usually uses IRQ 1 and the floppy disk drive IRQ 6. Each device will try to hog a single IRQ for itself.

If there are a lot of devices, or if they are not installed properly, two of them may end up sharing the same IRQ number. When the user tries to use both devices at the same time, a crash can happen. The way to check if your computer has a hardware conflict is through the following route:

* Start-Settings-Control Panel-System-Device Manager.

Often if a device has a problem a yellow ‘!’ appears next to its description in the Device Manager. Highlight Computer (in the Device Manager) and press Properties to see the IRQ numbers used by your computer. If the IRQ number appears twice, two devices may be using it.

Sometimes a device might share an IRQ with something described as ‘IRQ holder for PCI steering’. This can be ignored. The best way to fix this problem is to remove the problem device and reinstall it.

Sometimes you may have to find more recent drivers on the internet to make the device function properly. A good resource is www.driverguide.com. If the device is a soundcard, or a modem, it can often be fixed by moving it to a different slot on the motherboard (be careful about opening your computer, as you may void the warranty).

When working inside a computer you should switch it off, unplug the mains lead and touch an unpainted metal surface to discharge any static electricity.

To be fair to Mcft, the problem with IRQ numbers is not of its making. It is a legacy problem going back to the first PC designs using the IBM 8086 chip. Initially there were only eight IRQs. Today there are 16 IRQs in a PC. It is easy to run out of them. There are plans to increase the number of IRQs in future designs.

2 Bad Ram

Ram (random-access memory) problems might bring on the blue screen of death with a message saying Fatal Exception Error. A fatal error indicates a serious hardware problem. Sometimes it may mean a part is damaged and will need replacing.

But a fatal error caused by Ram might be caused by a mismatch of chips. For example, mixing 70-nanosecond (70ns) Ram with 60ns Ram will usually force the computer to run all the Ram at the slower speed. This will often crash the machine if the Ram is overworked.

One way around this problem is to enter the BIOS settings and increase the wait state of the Ram. This can make it more stable. Another way to troubleshoot a suspected Ram problem is to rearrange the Ram chips on the motherboard, or take some of them out. Then try to repeat the circumstances that caused the crash. When handling Ram try not to touch the gold connections, as they can be easily damaged.

Parity error messages also refer to Ram. Modern Ram chips are either parity (ECC) or non parity (non-ECC). It is best not to mix the two types, as this can be a cause of trouble.

EMM386 error messages refer to memory problems but may not be connected to bad Ram. This may be due to free memory problems often linked to old Dos-based programmes.

3 BIOS settings

Every motherboard is supplied with a range of chipset settings that are decided in the factory. A common way to access these settings is to press the F2 or delete button during the first few seconds of a boot-up.

Once inside the BIOS, great care should be taken. It is a good idea to write down on a piece of paper all the settings that appear on the screen. That way, if you change something and the computer becomes more unstable, you will know what settings to revert to.

A common BIOS error concerns the CAS latency. This refers to the Ram. Older EDO (extended data out) Ram has a CAS latency of 3. Newer SDRam has a CAS latency of 2. Setting the wrong figure can cause the Ram to lock up and freeze the computer’s display.

Mcft Windows is better at allocating IRQ numbers than any BIOS. If possible set the IRQ numbers to Auto in the BIOS. This will allow Windows to allocate the IRQ numbers (make sure the BIOS setting for Plug and Play OS is switched to ‘yes’ to allow Windows to do this.).

4 Hard disk drives

After a few weeks, the information on a hard disk drive starts to become piecemeal or fragmented. It is a good idea to defragment the hard disk every week or so, to prevent the disk from causing a screen freeze. Go to

* Start-Programs-Accessories-System Tools-Disk Defragmenter

This will start the procedure. You will be unable to write data to the hard drive (to save it) while the disk is defragmenting, so it is a good idea to schedule the procedure for a period of inactivity using the Task Scheduler.

The Task Scheduler should be one of the small icons on the bottom right of the Windows opening page (the desktop).

Some lockups and screen freezes caused by hard disk problems can be solved by reducing the read-ahead optimisation. This can be adjusted by going to

* Start-Settings-Control Panel-System Icon-Performance-File System-Hard Disk.

Hard disks will slow down and crash if they are too full. Do some housekeeping on your hard drive every few months and free some space on it. Open the Windows folder on the C drive and find the Temporary Internet Files folder. Deleting the contents (not the folder) can free a lot of space.

Empty the Recycle Bin every week to free more space. Hard disk drives should be scanned every week for errors or bad sectors. Go to

* Start-Programs-Accessories-System Tools-ScanDisk

Otherwise assign the Task Scheduler to perform this operation at night when the computer is not in use.

5 Fatal OE exceptions and VXD errors

Fatal OE exception errors and VXD errors are often caused by video card problems.

These can often be resolved easily by reducing the resolution of the video display. Go to

* Start-Settings-Control Panel-Display-Settings

Here you should slide the screen area bar to the left. Take a look at the colour settings on the left of that window. For most desktops, high colour 16-bit depth is adequate.

If the screen freezes or you experience system lockups it might be due to the video card. Make sure it does not have a hardware conflict. Go to

* Start-Settings-Control Panel-System-Device Manager

Here, select the + beside Display Adapter. A line of text describing your video card should appear. Select it (make it blue) and press properties. Then select Resources and select each line in the window. Look for a message that says No Conflicts.

If you have video card hardware conflict, you will see it here. Be careful at this point and make a note of everything you do in case you make things worse.

The way to resolve a hardware conflict is to uncheck the Use Automatic Settings box and hit the Change Settings button. You are searching for a setting that will display a No Conflicts message.

Another useful way to resolve video problems is to go to

* Start-Settings-Control Panel-System-Performance-Graphics

Here you should move the Hardware Acceleration slider to the left. As ever, the most common cause of problems relating to graphics cards is old or faulty drivers (a driver is a small piece of software used by a computer to communicate with a device).

Look up your video card’s manufacturer on the internet and search for the most recent drivers for it.

6 Viruses

Often the first sign of a virus infection is instability. Some viruses erase the boot sector of a hard drive, making it impossible to start. This is why it is a good idea to create a Windows start-up disk. Go to

* Start-Settings-Control Panel-Add/Remove Programs

Here, look for the Start Up Disk tab. Virus protection requires constant vigilance.

A virus scanner requires a list of virus signatures in order to be able to identify viruses. These signatures are stored in a DAT file. DAT files should be updated weekly from the website of your antivirus software manufacturer.

An excellent antivirus programme is McAfee VirusScan by Network Associates ( www.nai.com). Another is Norton AntiVirus 2000, made by Symantec ( www.symantec.com).

7 Printers

The action of sending a document to print creates a bigger file, often called a postscript file.

Printers have only a small amount of memory, called a buffer. This can be easily overloaded. Printing a document also uses a considerable amount of CPU power. This will also slow down the computer’s performance.

If the printer is trying to print unusual characters, these might not be recognised, and can crash the computer. Sometimes printers will not recover from a crash because of confusion in the buffer. A good way to clear the buffer is to unplug the printer for ten seconds. Booting up from a powerless state, also called a cold boot, will restore the printer’s default settings and you may be able to carry on.

8 Software

A common cause of computer crash is faulty or badly-installed software. Often the problem can be cured by uninstalling the software and then reinstalling it. Use Norton Uninstall or Uninstall Shield to remove an application from your system properly. This will also remove references to the programme in the System Registry and leaves the way clear for a completely fresh copy.

The System Registry can be corrupted by old references to obsolete software that you thought was uninstalled. Use Reg Cleaner by Jouni Vuorio to clean up the System Registry and remove obsolete entries. It works on Windows 95, Windows 98, Windows 98 SE (Second Edition), Windows Millennium Edition (ME), NT4 and Windows 2000.

Read the instructions and use it carefully so you don’t do permanent damage to the Registry. If the Registry is damaged you will have to reinstall your operating system. Reg Cleaner can be obtained from www.jv16.org

Often a Windows problem can be resolved by entering Safe Mode. This can be done during start-up. When you see the message “Starting Windows” press F4. This should take you into Safe Mode.

Safe Mode loads a minimum of drivers. It allows you to find and fix problems that prevent Windows from loading properly.

Sometimes installing Windows is difficult because of unsuitable BIOS settings. If you keep getting SUWIN error messages (Windows setup) during the Windows installation, then try entering the BIOS and disabling the CPU internal cache. Try to disable the Level 2 (L2) cache if that doesn’t work.

Remember to restore all the BIOS settings back to their former settings following installation.

9 Overheating

Central processing units (CPUs) are usually equipped with fans to keep them cool. If the fan fails or if the CPU gets old it may start to overheat and generate a particular kind of error called a kernel error. This is a common problem in chips that have been overclocked to operate at higher speeds than they are supposed to.

One remedy is to get a bigger better fan and install it on top of the CPU. Specialist cooling fans/heatsinks are available from www.computernerd.com or www.coolit.com

CPU problems can often be fixed by disabling the CPU internal cache in the BIOS. This will make the machine run more slowly, but it should also be more stable.

10 Power supply problems

With all the new construction going on around the country the steady supply of electricity has become disrupted. A power surge or spike can crash a computer as easily as a power cut.

If this has become a nuisance for you then consider buying a uninterrupted power supply (UPS). This will give you a clean power supply when there is electricity, and it will give you a few minutes to perform a controlled shutdown in case of a power cut.

It is a good investment if your data are critical, because a power cut will cause any unsaved data to be lost.

Once upon a time,I installed AVG Antivirus Free Edition.One day , I started to give me problems : the virus definition must be updated daily..the software can’t detect certain virus known as trojan horse and worms…At last my pc crashed.I have to reinstall windows and pushed AVG out ( You’re fired !!! ).Once upon a time , I used to download AVG Antivirus Free Edition , it was my favourite antivrus software.

Then , I downloaded Avast Antivirus Free Edition.The interface looks funny,just like a media player.The scanning result was  lousy , it could not detect trojan horses and dangerous worms.Avast was fired too!!!

Secondly, I bought Norton Antivirus 2006 , it still cannot detect dangerous viruses.The result is the same as McAfee Antivirus .Once upon a time Win32.Brontok was classified as a dangerous trojan horse.Norton and McAfee could not detect Mr.Brontok.At last I uninstall Norton before the license expired because Brontok virus have multiplied all system and document files in the pc.Luckly I managed to download Brontok removal tool…And this time I installed Avira Antivirus Free Edition.The removal tool could not work and Avira recognised this tool as a VIRUS instead!!!

I have to uninstall Avira and run the removal tool and managed to remove all infected system files.It was just a silly move when I installed  Avira again into my pc.Updating virus definition files was smooth…Avira Antivirus served my pc for three years.Few months ago , Avira started to give me problem : the updater server was always disconnected when it downloaded  30% to 50%.I have to started all over again to update.Avira seems to be stupid to ask the user :”Is this a trojan horse?”How do I know that?This antivirus is stupid.It happened several times and I told Avira : “You’re fired”.Avira could not identify Antirus 2008 and Antivirus 2009 as dangerous worms.My pc crashed again.Antivirus 2008 took over my pc and remove the start menu and all hard drives are missing.I have to reinstall windows again.

I downloaded Comodo Antivirus and use it for a few days because it uses a lot of RAM.

I purchased NOD32 and experience the same as AVG , Avast and Avira.

At last , I bought Kaspersky Internet Security 2009.I’ve tested that I can identify Antivirus 2008 and Antivirus 2009 as viruses .Hooray to Kaspersky Internet Security : removed and deleted the infected file effectively.

Kaspersky Internet Security is the best compared to other antivirus softwares.

Converting .3gp to mp3 or audio will only cause cd burning failure.

My advise : Get a mpeg file and convert to mp3 first .Then , from mp3 , you convert to wma ( windows media audio ).I recommend Format Factory.You can download from here : http://www.formatoz.com/download.html

To burn an audio cd , select all wma files into cd compilation.I suggest using Nero or Ashampoo Burning Studio Free Edition.

Every time I go to my friend home for  his PC problem

I need around 2 hours for traffic go & back , 30 min for fix computer error

so 2:30 hours only for 30 min is fix computer error

and now , I got a software to help me , it’s name : TeamViewer

website : http://www.teamviewer.com/products/screenshots.aspx

Introduce Program :

TeamViewer is our solution for easy and friendly desktop sharing. You can remote control a partners desktop to give online assistance, or you can show your screen to a customer – all without worrying about firewalls, IP addresses and NAT.

TeamViewer offers a clean and simple to use interface.

When connecting, you decide if you want to remote control your partner, show your own desktop to a partner or if you only want to transfer files without sharing your desktop – all versions of TeamViewer include all modes!

All versions of TeamViewer include full file transfer with file and folder copy. For maximum speed all data is automatically compressed before transmission.

I know I have not been here in my blog since a couple of days back. I can understand the loss I had during these days. People are always expecting more but you might not be able to stand there with their expectation. I could not write my blog as I was facing lot of problem, One of them was internet connection and another is my computer. I had a very dangerous virus caught in my pc which deleted all my data and files from my pc. I had to go through the reformat process and got my pc back but not the data and files now I hope I can go on blogging.

OLEAUT32.DLL
DLL errors related to the oleaut32.dll file are usually caused by an incorrect version of this particular DLL file being installed on the operating system. The error is triggered when you attempt to run a Microsoft Office product, although some programs will run better than others. You’re most likely to see the oleaut32.dll error when running Microsoft Excel.

HLINK.DLL
DLL errors sprung from the hlink.dll library are typically found when attempting to view a Powerpoint presentation on Microsoft Windows. The file may have become corrupt, or could require updating to function effectively. You can update your hlink.dll file by downloading the latest Windows security package, or by running the installation package that comes with Internet Exporer. The old hlink.dll file should be removed first.

WAB.DLL
The wab.dll error is usually accompanied by a message stating that the file is missing. This could be down to a corrupt version of the file exiting, or it may have been deleted by access. To resolve these kinds of DLL errors, you will need to rename the old wab.dll file and then re-install Outlook Express. The re-installation will write a fresh working version of the wab.dll to your system.

OMINT.DLL
DLL errors that produce a message stating that the required component omint.dll is missing are usually restricted to older versions of Outlook Express. If you are trying to run Outlook Express 98, for example, you may find that your version of the omint.dll file is newer than the application itself. In this case, you will need to roll back to an older version. It’s also possible that the registry entries have become corrupted.

GWMSPI.DLL
The gwmspi.dll error message is caused by a conflict between two applications. These applications are Microsoft Outlook 2000 (standard edition only), and Novell. You will need to create two separate messaging profiles to get rid of DLL errors such as this. Uninstall one of the two applications and then install from scratch as an additional method of fixing the error.

RICHED20.DLL
When accessing Microsoft Outlook, you may notice an access violation DLL error related to the riched20.dll file. This shows that the file has become corrupt and you will need to repair Microsoft Outlook to fix the problem. Before you run the repair function, be sure to rename the riched20.dll file so as not to compromise the effectiveness of the repair.

MSVCP60.DLL
DLL errors tied to the msvcp60.dll file are notoriously hard to repair and usually require the complete re-installation of the Microsoft operating system. The error appears when trying to run features of Clip Gallery 5.0 in particular.

WMP.EXE
If you encounter an error related to the wmp.exe file, you could easily be misled in to believing that you have a problem with Windows Media Player itself. This is false. The problem actually stems from the DLL library associated to the program. You will need to re-register WMP.DLL to fix the problem, and can do so from the Run command on recent versions of Windows.

WMPDXM.DLL
DLL errors are quite common with Windows Media Player versions 9 and 10. The wmpdxm.dll error is directly related to the media player, as you’d expect, and is usually caused by the DLL file not being registered. To fix, you should attempt to re-register the DLL file. In some cases, a fresh version may be required as the DLL may have become corrupted or deleted.

MSI.DLL
If you’re trying to install a Microsoft Office product, and receive an msi.dll error, it’s likely that you will need to update Microsoft Installer which relies on the DLL file. The problem can be caused by a download being interrupted or by one of many types of corruptions. Visit the Microsoft website and upgrade your Installer to the latest version to resolve the error.

OFFICEAV.DLL
DLL errors related to the officeav.dll file are triggered when attempting to open a document in Microsoft Word while having a damaged officeav.dll library. The file is typically sound in the Norton add-on that caters for Microsoft products. You can fix the error by renaming the officeav.dll file and then re-activating the Norton plugin.

OLE32.DLL
The ole32.dll error may appear when attempting to add a clipart image to your open Word document. DLL errors such as this are usually caused by the ole32.dll library not being registered correctly on the Windows operating system. You can try re-registering the file, but if this doesn’t work, a complete Windows re-install may be necessary.

DLBAPRP.DLL
If you have Lexmark or Dell printers installed on your system, you may eventually encounter DLL errors related to the dlbaprp.dll file. This typically appears when you try to print or save a document in Microsoft Word. Besides from contacting the manufacturer directly, you can attempt to fix this DLL error by copying your key printer DLL files and placing them in the Windows/System32 folder.

HPAFD32.DLL
DLL errors linked to the hpafd32.dll file will cause Microsoft Word to close suddenly and without prior warning. The error is caused after a user has been using an HP printer model 1200 or 3200, and subsequently attempts to update to a newer model from HP. The installation won’t automatically update the hpafd32.dll file, and thus the printer will have problems. A driver upgrade is necessary.

MSVCRT.DLL
If your program has caused an illegal operation and been forced to shut down because of a msvcrt.dll error, it’s likely that your DLL files for the Word add-in with Microsoft Works have become corrupt. You should deactivate the Word plug-in before restoring it. This will force new copies of the files and will fix the DLL errors in most cases.

MSJAVA.DLL
The msjava.dll error is caused when you access a web page that attempts to load a script which the browser isn’t capable of handling. DLL errors related to the Java virtual machine – like this one – can usually be fixed by updating to the newest version of the JVM. Also ensure that you actually have scripting enabled in your Internet Explorer settings.

KERNEL32.DLL
The kernel32.dll error is generally caused by MacAfee software which runs a quick scan when you close a window in Internet Explorer – and occasionally Microsoft Outlook. The best way to get rid of these kinds of DLL errors is to access the MacAfee software directly and disable these scanning features.

ACTXPRXY.DLL
DLL errors related to the actxprxy.dll library are triggered when the user tries to open a fresh window in Internet Explorer, but the browser crashes and throws an error instead. Unfortunately, these DLL errors are related to the Windows registry itself and may be a giveaway sign that you’ve got several corruptions in the core files. Consider a registry scanning tool which should help to get rid of bad entries and fix this variety of DLL errors.

MSHTML.DLL
This is one of a select few very rare DLL errors that you shouldn’t be experiencing unless you’re running the extremely outdated Internet Explorer version 5.5 or earlier. The mshtml.dll error can be triggered by IE settings which involve the use of high or true colours. To fix, simply reset your settings to use 256 colours in the colour palette. Alternatively, you can upgrade your video card drivers via the manufacturer’s website.

SHELL64.DLL
Occasionally, you may encounter an error in Internet Explorer stating that the application has struck an error and will need to close. The shell64.dll error is caused in Internet Explorer version 6 when a third party program attempts to attach itself on to the browser and write a separate shell64.dll file to the system folder. Delete or rename the file to fix the problem.

Chris Pirillo is a geek that have created some websites that are called lockergnome.com and chris.pirillo.com 

Lockergnome is a blogsite where you can register and get you own blog and make money with it (if you can write something thet people will read).

Chris.pirillo.com is Chris’ own blog that have text and if you don’t want to read the text you can just look at the video that he have in his blog. The video that are in his blog is also on youtube and his youtube channel is lockergnome.

When you are looking at his blog you can see a live video stream that is streaming 24/7 and you can join the chat room. In the chat room they are talking mostly tech but you can see that they talk about other things like food.

You can also find the chat room at live.pirillo.com (The Stream Is On 24/7)

On amazon.com can you find stuff that th prise are 10 – 90 % off. The atuff that are 90 % off can be good things but it can be crap. If you are looking for USB sticks then you will find them under the 90 % off. The USB sticks are 512 – 2 Gb capacity.

you can find almost every thing there. I use a list that jimmyr.com have made.

just go to: specials.jimmyr.com

If you need help just email me at ford.mustang.gt500m@gmail.com

911tabs.com is a site where you find guitar, bass, drum and piano tabs that other people have uploaded to other sites. the reason 911tabs don’t have the tabs on their site is that they are a search engine for tab. they have all the artists you like and the artists you don’t like.

If you become a member of this site or one of the subsites then you can upload you version of dvi songs.

Wikipedia is a search engine for facts form around the world. Wikipedia have more that 20 languages, so you can translate all the artikkles in to your language. You cant trust every thing that you read in Wikipedia because every one can go in and edit the text that are there.

WikiHow is a very good site if need to learn something in a few minutes. This site is created by people that wnat to help you. there are some info that is wrong but you will learn a lot form this site.

Wikibooks is a site where you can find book from you favorite author’s. Ypu can look for houers for good books and you will find them just don’t give up. The one thing this site is famous for is that people can learn new languages there and it works. I got better at German by reading books the Wikibooks have.

These site are made so YOU can get what you NEED.

If you need help with this just email me : ford.mustang.gt500m@gmail.com

Google has a program were you can make money and in the end of evey year you get a gift from google. The only thing you need to get money and the gifts is a website. The easyest way to get a website is to buy one and a websit isn’t expensiv. If you know the HTML codes, you can create you own site.

If you need some more info go to Google.com

Ustream.tv is a good site for people that want to broadcast them self on the internet. I think ustream is good is that it’s free and that it’s not difficult to use. So you don’t need to have all the knowledge about 

The only thing you have to do is to make a good name for you show and you can press the broadcast button. DO NOT; create a name that has over 20 words then no one will remember the name. If some of your friends are looking for your show and you have a name that is 20 words long they can’t find it and they will find something else interesting. The name should be simple so people can find it.

If you want to broadcast yourself go to www.ustream.tv and register.

Need help send me an email : ford.mustang.gt500m@gmail.com

Αυτές τις μέρες έχω πρόβλημα με το pc μου γιαυτό και δεν απαντούσα στα comments σας και γενικά δεν ασχολούμουν με το blog. Για κάποιο περίεργο λόγο το pc freezαρε χωρίς λόγο ενώ το χρησιμοποιούσα , είτε μιλούσα msn είτε άκουγα μουσική, γενικά ότι και να έκανα. Στην αρχή σκέφτικα πως το πρόβλημα θα είναι η σκόνη,το φύσηξα  αλλά τίποτα. Μετά έβγαλα το ανεμιστηράκι για να το καθαρίσω και αυτό… Έλα όμως που ο επεξεργαστής ήταν κολλημένος πάνω στο ανεμιστηράκι και για να τον ξαναβάλω έπρεπε να τον ξεκολλήσω… Τελικά έλυσα το πρόβλημα ζεστένοντας το μέταλλο με το πιστολάκι για τα μαλλία έτσι ώστε να μαλακώσει η κόλλα και να γλυστράει. Αφού το εκανα αυτό όλο χαρά ανοίγω το pc, πάω να δω λίγο Kabamaru μαζί με τον αδερφό μου και ένα φίλο μας και αφήνω το pc να μπει σε screen saver… Ε όταν γυρνάω και πάω να κάτσω είχε πάλι κολλήσει… Τραβάω το reset του και ψάχνω να δω τι στο καλό φταίει… Τελικά το πρόβλημα είναι οι πυκνωτές της motherboard οι οποίοι τα έχουν φτύσει και έχουν γίνει κάπως έτσι:

Η λύση είναι αλλαγή των πυκνωτών , που δεν ξέρω αν θα βρώ σωστούς και κατα πόσο θα αξίζει απο πλευράς κόστους, ή αλλαγή motherboard, πράγμα δύσκολο γιατί είναι αρκετά παλιό το όλο σύστημα και θα θέλει ολική αλλαγή (motherboard, μνήμη, cpu, κάρτα γραφικών) και λεφτά δεν παίζουν, το γιατί θα το δείτε σε επόμενο θέμα

Ελπίζω να βρώ λύση και να τα λέμε πιο συχνά, αλλιώς θα επικοινωνούμε όποτε  πέρνω το laptop του αδερφού μου