long story short, I shot the rock for life tribute concert event on sunday with marina. we got complete full access from juan, who not only produced the show but was the lead of the doors cover band. good news, a bunch of my photos were published on a website! so you should probably check them out. here’s a screen shot to get you pumped. check out the rest here:

http://www.fotos.emol.com/categorias.aspC_ID=120&C_Nombre=M%FAsica,%20Cine%20y%20Espect%E1culos

A 23-year-old man is shot in the legs by a masked gunman outside a bookmakers in Liverpool…. From BBC News. Full story

This site may contain information about: city club. The blog is also related to: shoe city.

Street Photo | fot. Boat And tHE City

Przeglądając ostatnio zawartość dysku w poszukiwaniu jakiegoś ciekawego materiału na bloga natknąłem się na ustrzelonego tego lata na Retkini “Desperado”. Jako, że ciężko było wpasować ten materiał w jakiekolwiek ramy panujące na tej stronie wymyśliłem sobie taką mocno naciąganą teorię… tak więc zaprezentuje wam tym razem krótką serię “Street Photo” w moim wydaniu. Osobiście nie szczególnie przepadam za tym typem fotografii ze względu na kontrowersje dotyczące praw autorskich, ciekaw jestem jakie jest wasze zdanie na ten temat?

Street Photo | fot. Boat And tHE City

Street Photo | fot. Boat And tHE City

Street Photo | fot. Boat And tHE City

Today, more than ever there is a need for Industry to be responsible in its environmental judgements and actions. With the haste to improve the over-all environmental situation and push on Industry to reduce its carbon footprint, it is important to educate yourself on the short term and long term ramifications of the “Green” solutions you implement. In the case of lighting upgrades, there is a great opportunity to reduce corporation and municipality electricity expenses and more importantly to reduce the electricity demanded from the energy providers who are the greatest contributors of CO2 gases released into the environment. In selecting the lighting solution, you want to ensure you investigate not only the short term purchasing costs, but also the long term costs associated with waste; i.e. labour costs due to installation, maintenance/cleaning and light bulb replacements; and lamp consumable cost expenses which are significant yet typically ‘hidden’ or looked over and purposely not highlighted in the selling process of fluorescent (FLUO) and LED based lighting products.

When considering the type of lighting for your new or retrofit high-bay or low-bay lighting application, it is essential to be educated and made aware of what long term costs will be incurred over the lifetime of the lighting system. One very important aspect to consider is the maintenance and labour costs associated with the cleaning and the changing of lamps. Fluorescent and LED lighting systems have the problem that the light quality they emit inherently degrades over the operating life of their lamps, increasing the lamp replacement frequency and over-all expenses of operating those systems.

Comparing Digital Ballast powered High-Intensity Discharge lighting (Digital HID or DHID lighting) to fluorescent and LED, end-users agree that the added value offered in terms of the DHID solution’s low buying price, energy efficiency, light quality/performance, and reduced labour and maintenance costs, ensures end-users benefit with the best lighting for the shortest payback or return on investment time. Furthermore, when considering the upgrade or retrofit of an existing inefficient lighting installation, one must consider the labour costs involved in the installation; such as the removal of the old lighting system, re-wiring, changing of the lighting grid pattern, and all the consumable costs and other indirect waste created as a result. In the case of the upgrade of an existing core and coil (magnetic) powered ballast fixture, the DHID digital ballast solution is simple, cost-effective, outperforms and is the most environmentally responsible.

It is wise to consider the long term costs associated with fluorescent lighting to truly appreciate the “realistic” return on investment of fluorescent based lighting for factory/warehouse, retail, and general building high-bay and low-bay lighting applications. The following facts about DHID lighting versus FLUO lighting serves to highlight the performance and the common costs associated with the installation and operation of each in the short and long term to help you accurately conclude your own realistic return on investment calculation.

Capabilities and Benefits of DHID Vs. FLUO

This is a direct comparison between both DHID and fluorescent lighting solutions for a 40ft high-bay ceiling application where antiquated core and coil (magnetic) 1000W ballasts in existing HID fixture are already installed.

The recommended Digital HID retrofit solution is a dimmable 575W DHID ballast powering a 750W Metal Halide (MH) bulb. The proposed fluorescent high output high-bay T5 solution features 8 lamps at 54W each and 2 non-dimming electronic ballasts.

Installation Complexity and Cost?

DHID: A simple ‘plug and play’ retrofit of one digital ballast into the existing HID fixture and one new HID bulb installed where needed. The existing fixture is re-used and the efficiency is significantly improved by 50% to 75%. The performance and light quality is also better offering 40% brighter, whiter, penetrating light over the old system. The typical labour cost to retrofit a fixture is $50.00 US and takes approximately 30-45 minutes per fixture. The typical total package cost to retrofit a 1000W magnetic ballast application is $250-$300 US including the DHID 575W ballast, light bulb and installation cost.

FLUO: To install fluorescent you need to remove and recycle the used HID fixtures including ballasts, bulbs, reflectors, wires and the exterior metal housings. You then need to create new hanging structures for the new standard size fluorescent T5 8 Lamp high output fixtures. The lighting grid layout will need to also be changed as more T5 fluorescent fixtures will be needed to ensure a uniform light coverage (overlap) at the floor between them. In most cases, extra mid level or low-bay lighting needs to be installed where illumination from the fluorescent high-bay is not significant enough. There are also costs associated with the assembly of the individual fluorescent fixtures which is a labour cost the electrical contractor will invoice. With 8 bulbs and 2 ballasts, the complexity of a fluorescent system is high, adds cost and inhibits performance. The typical cost for a fluorescent T5 8 lamp high output fixture is starting at $280 US or more and this cost does not include the assembly/installation and the cost of the 8 lamps needed per fixture and for inventory.

Luminous Efficacy and Lumens Per Watt Performance?

DHID: Luminous efficacy of 118lm/W for digital ballast powered Metal Halide (MH), High-Pressure Sodium (HPS) and Ceramic Metal Halide (CMH) HID bulb applications. If retrofitting an existing HID fixture which has an antiquated 1000W core and coil (magnetic) ballast, a new 575W digital ballast would be installed in place powering a 750W MH bulb for a new total fixture lumen output of 67,850lm (575W X 118lm/W).

FLUO: Luminous efficacy of approximately 81lm/W if 54W bulbs in a fluorescent T5 8 lamp high-output fixture operating with 2 ballasts. If 54W bulbs offer a total lumen output of 4400lm output each, then 4400 X 8 lamps = 35,200 total lumen output from the T5 8 lamp high output fixture.

Ballast / Fixture Efficiency Performance?

DHID: One digital ballast is 97% efficient. For the existing magnetic 1000W MH, we retrofit the 575W DHID ballast operating a 750W MH bulb at 592W with 3% losses. At 575 Watts, the DHID system will produce more lumens at the ground than both the existing 1000W MH and fluorescent consideration. Moreover, the notable increase in lumen output performance will bring the existing fixtures back to life, with more light at the ground, and with more light over-laps between the fixtures for a brighter white facility and working area. Due to the increase in the lumen output of the DHID ballast high-bay installation, 30% to 40% of the existing mid level fluorescent lighting can be removed adding additional energy savings. And since the 575W DHID can be dimmed, even more electricity savings are possible; e.g. instantly dimmed to 20%, the 575W ballast only consumes approximately 474W yet still outputs bright penetrating light to the target.

FLUO: Two electronic ballasts are 90% efficient. Operating 54W x 8 bulbs = approximately 480W total with heat losses. Due to the poorer lumen output of T5’s, more fixtures should be added to the lighting grid to compensate for the lower lumen output to the ground. The 2 ballast design and the accumulation of 8 bulbs creates 10% losses to heat and increased wear on the bulbs leading to a more rapid degradation in light quality. The T5 fixture in this example does not have dim capabilities; to dim would add extra cost and complexity due to the ‘special’ dimming ballasts required. As a result of dimming fluorescent, there is also increased wear and tear on the lamps adding to lamp change increases and ultimately increased labour and consumable costs in the short and long term.

Light Quality Throughout Bulb Life?

DHID: Due to Digital HID’s 118lm/W luminous efficacy performance, more lumens, and natural white bright light penetrates to the facility floor. The light quality is guaranteed over the entire life of the bulb due to patented digital ballast technologies. The bulb does not degrade more than 5% from the life start to life end of the bulb creating huge benefits to retail, factory/warehouse or any applications where consistent bright white light is mandatory. The DHID ballast increases the life of HID bulbs radically by 100% (or more if dimming is utilized). A bulb with an original mean time before failure (MTBF) rating of 20,000 hours will now last 40,000 hours or more and will suffer no less than 5% light degradation throughout the bulbs life. The high luminous efficacy of the DHID ballast delivers brighter more penetrating lumens to the factory or retail application floor for less cost. Compared to LED, fluorescent, and induction based lamp systems, DHID powered systems easily offer the best light quality/performance for the lowest total operating/consumable costs.

FLUO: The fact is that all fluorescent lamps, be they hot cathode, cold cathode or electrode-less will suffer from phosphor degradation. The rate of this degradation is a function of the type and the amount of phosphor, and the type of glass used for the tube. The temperature of the phosphor and glass and the intensity of the UV flux from the discharge also play a role in enhancing the degradation of a fluorescent bulb. High Output (HO) and Very High Output (VHO) bulbs will normally degrade faster than standard output bulbs.

Most standard output fluorescent bulbs claim 10,000 hours to 20,000 hours or more operating lifetimes, but can fall to 80% or less of their original light intensity after only 10,000 hours of operation. One must take into account the long term costs of this realistic bulb degradation and failure in considering fluorescent for your lighting application. If dimming ballasts are installed, please factor in this extra cost and also the increased cost of labour and consumables due to increased lamp changes as dimming has an adverse effect on the life of the fluorescent bulb, degrading it even quicker.

Fixture Noise, Static; Light Quality Psychological Impact?

DHID: The proven DHID ballast is silent, and operates warm as only 3% losses are to heat; the ballast is 97% efficient and does not create significant static electricity. Pulse start MH bulbs are inexpensive and produce a natural white light which is more pleasant to work under. Studies have shown that humans working in brighter, more naturally lit environments are more alert and more productive.

FLUO: Some of the common nuisances end-users underscore about fluorescent lighting are the noise, the light quality/flicker, the colour, and rapid light quality degradation by or before the bulb’s mid-life and inevitably thereafter. Fluorescent lighting fixtures require increased maintenance and cleaning due to the dust that collects on the static charged surfaces of the system. The dust and debris accumulation on the bulb and on the reflector surface is unhealthy and further adds to the degradation of light quality and total lumen output.

Lamp(s) and Ballast(s) Change Frequency?

DHID: Only 1 lamp needs to be replaced per HID fixture and with little labour cost/time needed as HID fixtures are typically easy to maintain with easy access to the light bulb. HID bulbs operated with the DHID ballast are rated to 30,000 hours to 40,000 hours or more life expectancy (with dimming) and the bulb lumen output is guaranteed to not decrease more than 5% over the lifetime of the bulb. The DHID ballast will output 118lm/W right up until the bulb’s life end. The DHID ballast is rated to a 10 year MTBF and will output the same 118lm/W up until its life-end. At ballasts life-end, it is again a very simple and cost-effective replacement to upgrade the HID system without having to replace entire fixtures.

FLUO: 8 lamps per fixture need to be replaced and much more frequently than DHID which adds more labour and maintenance costs. If mean time before failure of the fluorescent bulb is 20,000 hours then lamps need replacement every 2 to 3 years. If the lamps are considered to be failed at 10,000 hours due to significant light quality and brightness degradation, then lamp change frequency needs to be every 1 to 2 years. Since the 8 lamp fluorescent fixtures need two ballasts each, then at the ballasts life-end two ballasts need replacement. If you factor in the labour costs to remove the old ballast and reinstall new ballasts, it becomes evident that a lot of waste is created due to the limitations of the fluorescent lighting technology.

Long Term Realistic Bulb And Ballast Expenses?

DHID: Simple example: 1 bulb per existing fixture x 500 fixtures X $20 US approximate HID bulb cost for a 750W Pulse Start Metal Halide bulb = 500 bulbs at $10,000.00 US total every 4-6yrs+. Very simple procedure, 1 lamp to replace and it is easy to do in the existing fixtures since the bulbs are really easy to access. This decreases the maintenance labour costs noticeably. The DHID ballast is rated to 10 years MTBF and is also easy and cost-effective to replace at that time.

FLUO: 8 x T5 high output bulbs X 500 units = 4,000 bulbs. At an approximated bulb price of $5 USD X 4,000 bulbs the total bulb consumable costs alone is $20,000 US. If the bulb lasts 15,000 hours without significant degradation, you would incur this expense every 2 years approximately. In addition, there will be increased labour costs incurred to change 8 lamps per fixture. At the end of the ballasts life there will again be expenses incurred to replace either the entire fixture (more waste), or to retrofit two new ballasts in the existing fixture. Either option with fluorescent will result in inevitable labour and consumable expenses and environmental waste.

Motion Sensor Dimming Capabilities?

DHID: It is possible to dim Metal Halide, High-Pressure Sodium and Ceramic Metal Halide HID bulbs with DHID digital ballasts. Dimming is simple and instant and it adds to the already sizeable savings in energy consumption since the DHID ballast can dim the HID bulb from 100% power to 50% power or any step in between this range. The dimming of a DHID ballast powered bulb is barely noticeable because the system still delivers high lumen output in the dimmed state. With smart dimming, the electricity costs to operate the system are further reduced without disrupting the operation or safety of the working environment. Motion sensors are strategically placed to detect human and operator activity to determine lamp on times at full power.

In the case of a 575W DHID ballast powered HID bulb replacing a magnetic 1000W system drawing 1200W with approximated heat losses, the end-user can expect 50% or more savings without dimming. The system can then be dimmed down via motion sensor or switch by 20% to the 460W setting for the additional 20% in savings in electricity (1200W – 592W – 118.4W = 489.6W / 1200W = 59%+ savings total).

With the advancement in the DHID technology over magnetic based HID systems, lamp start times are 1 minute, dimming is instantaneous and start-up after a hot re-strike is 3 minutes. In most Industry applications, instant dimming capabilities are preferred since HID lighting systems are typically installed in areas where the lights are to be on for extended time periods. Where it is essential to have the lights on always, the dimming of a HID system is ideal since lumen output is still high in the dimmed state, yet more electricity is saved since the lights are only at full power when needed.

FLUO: Yes and No; it is possible to dim fluorescents, but you need special and expensive ballasts with this capability for T5 fluorescent bulbs. This adds expense as you need two ballasts per each 8 lamp high-bay fixture. Without dimming there is a great limit on electrical energy savings possible with fluorescent lighting. One should also consider the original lumen output performance when considering the fluorescent solutions versus a DHID retrofit solution since DHID offers a much higher output of lumens to the target, even in the dimmed state. Secondly, one should consider the effect of dimming on the fluorescent bulb since increased dim-on and dim-off cycles reduce the bulbs life. Fluorescent lighting was not originally designed for dimming, and is typically not recommended due to the associated expenses, performance limitations and poor return on investment.

Return On Investment?

DHID: With DHID the short term return on investment payback is 0.5 years to 1 year for a total DHID retrofit package including bulb, ballast and installation. In the long term, if utilizing an MH bulb with a MTBF of 30,000 hours to 40,000 hours+ with dimming, operated at 6,240 hours yearly, the bulb would need to be replaced every 4.8 years or 6.4 years+ with dimming respectively. At a bulb cost of $20 US, the total consumable cost is miniscule over the lifetime of the system. The DHID ballast is rated at 10yrs MTBF with the potential to have its life extended further depending on the application. With fewer bulbs and less frequent lamp changes, maintenance/cleaning time is more infrequent making the money saved in labour and consumable expenses over the system life noteworthy. The DHID solution guarantees high energy efficiency, and high-quality, penetrating light over the entire lifetime of the bulb and the DHID ballast.

FLUO: The short term return on investment payback time is poor due to the initial cost of purchase and installation; i.e. the labour to assemble the new T5 8 lamp fixtures; the removal of the used HID fixtures; the install and wiring of the new T5 fixture; the installation of the 8 lamps and the accumulated costs of all the fixture hardware and individual lamps for each fixture. Furthermore, in the short term one must factor in the costs of how frequently the fixtures will require cleaning due to decreased light output as a result of dust accumulation. If the T5 high output bulb is able to last 15,000 hours without noticeable degradation due to cleaning and efficient bulb operation, then bulb change labour and consumable expenses will be frequent; every 2 years or less making the return on investment of fluorescent over the long term (5 years or more) most unfavourable when compared to the DHID retrofit solution.

 
The Environmentally Responsible Lighting Retrofit Solution

The DHID ballast retrofit solution is the most environmentally responsible and cost-effective upgrade for inefficient lighting installations. By simply retrofitting the Digital HID ballast into an antiquated HID lamp system, the old fixture is re-used and rejuvenated, bringing new life and a drastic improvement in performance to the HID bulb based system. This simple procedure leaves only the magnetic ballast to be recycled (and bulb in circumstances) and therefore creates much less strain on the environment.  The DHID solution is able to reduce Industry’s carbon footprint, and the over-all CO2 emissions released into the atmosphere due to the measurable amount of energy consumption reduced and physical and time waste reduced as a result of the DHID solution.

Digital HID lighting promises and delivers the optimal balance of energy efficiency, light quality/performance, and reduced maintenance benefits for the shortest realistic return on investment payback time in the Industry. We welcome the opportunity to discuss our findings with you further; please do not hesitate to contact me with any questions.

Anthony Borges
aborges@accendoelectronics.com
www.AccendoElectronics.com

When you go to London, the best time is during Summer, because there’s no snow and you will not feel chilly. When you land at Heathrow Airport you will have access to hire a taxi from there with a driver and he will get you to the very best places in London.

You can also take a taxi and go to other places that you wish to visit further afield. London is the most exciting city in the world, thanks to its 1000 years old history.

It has many gardens & museums for you to see and the first thing to do is visit Big Ben’s Tower and of course the London Eye by the Thames river which in itself has a really beautiful landscape. It is the longest river in England and measures 415 miles in length.

You can just relax and see the sights or go shopping and buy souvenirs from some of the best shops in the UK. Again London is the best city in the world both for shopping and for amazing tourist sites.

It has some of the nicest parks and gardens e.g. Hyde Park, Green Park, Battersea Park, Greenwich Park, Hampstead Park, Holland Park and many more.

Then you also have many museums to choose from, for example the Guards, Fashion & Textile, Bank of England, Museum of Garden History and plenty of others.

The concept of London is that it’s made up of tiny villages which complete the whole. Well illustrated by the famous North of London suburb of Hampstead Garden Suburbs.

Oxford Circus & Piccadilly Circus are great places to visit & they draw millions of visitors every single year. Piccadilly Circus is a rather an untidy place with lots of traffic. Otherwise it’s definitely the central hub of London’s West End and a very popular meeting place.

One more place where you must go to is The Palace of Westminster which is the crux of English Government (the Houses of Parliament which is it’s other title) is directly accountable to Her Majesty Queen Elizabeth II.

Many Diplomats & Celebrities live in the St. John’s Wood area which is located on top of the West End and is a most beautiful residential area north of Baker Street.

To have a good look at the City of London try a Duck Tour on the river and the road since you will be conveyed in an amphibious vehicle ! and it is easily the best way to travel by road and also to cruise along the river Thames as well.

London is also famous for it’s very historic buildings such as Whitehall, Admiralty Arch, Queen Victoria Memorial, Wellington Arch, Bunhill Fields, Convent Garden and Duke of York’s Column and many more.

For shopping try Carnaby Street, Charing Cross Road, Knightsbridge, Mayfair, Kensington and Oxford Street.

Now you have your answer as to Why Visit London !

Now that I have quit smoking (4 weeks, 2 days and 18 hours ago, yes… cigarettes are like the girlfriend who dumped me), I try to make guests smoke out in the balcony so as not to completely ruin the smoke free / Berry Splash Glade scent mixture in my flat. Since the Israeli winter has decided to stay in Western Europe, much like other smart young citizens, this balcony smoking law isn’t really a bother and it even creates for a voyeuristic experience, like the one on Sunday night…

I was inhaling the exhaled fumes of a certain someone’s cigarette out in the balcony and beneath us, on the street, an old ragged hobo-ish woman walked up to my building’s big green trash cans. She opened one up and started to rummage between the bits of left over spit and diapers. Scavenging through the garbage with her head fully tilted into the belly of the plastic dumpster. Suddenly, she paused, lifted her head up and to the side of the trash can and puked her guts out onto the sidewalk. I was disgusted, my gag reflex was kicking in. My so called friend was laughing hysterically. The woman / creature / troll like figure just took a deep breath and immersed herself into the green fortune chest, looking for her prize. After a few seconds, again, tilt of the head, up and over and evacuation of the stomach.

This went on in cycles as she meticulously searched the insides of these fly ridden canisters. As my desire to hurl finally calmed down, I started thinking of Michael Phelps. This woman had stamina, and she was not giving up. Every time the stench of garbage got too much for her, she lifted her head, as a swimmer does gasping for air, and puked. Revitalizing herself for a few more critical seconds in which she can sink herself back in the trash and look for her hidden treasures. She did not give up, she did not move on to a more aromatic bin, she braved through the stench and scouted the miserable content.

To me this woman is like an Olympian Athlete, the Rocky Balboa of Frug Street Gypsies, Lady Gag Bag.

PS – Idea to self: ‘Survivor 6^th Street – the search for leftovers”

Bastards have landed! All hail to the 3rd Class Aliens!! Here’s the Tale of the Astrobastard! Once in the debut of the century, 3 young cats by the names of Ice-O-Lator, Franck Whyte & Dirtwolff created a web forum in the ambition of promoting their mixtapes. At that time we’re about “Indie Rap”, looking for something radically different than mainstream rap. It was the era of Def Jux, Metal Face, Psychological Recs, Old Maid and way darker and unknown other “strange” rappers…definitly far away from Jay-Z, Nelly etc…to set things up. Visually, i’d decided to use and abuse of the Peter Jackson’s Bad Taste movie for the whole thing called “astrobastard”. I’d litteraly sucked-up everything i could find from the movie. It was such a good inspiration for what we wanted to do with our “movement”, hehe!!….You maybe knew us at the time or not, anyway here’s a lil’ selection of visuals  to reminisce the “Astrobastard” adventure that ended up around 2004/2005.

For that crazy concept i’d develloped a kind of “Pen & Pixels” poor photoshoped grafism style with Bad Taste Faces all over, Bling, Blinged em’ to death. (I’m a str8 up fan of the golden era pen & pixels, i mean No-Limit, Cash money…). Of course everything with Space and Cosmic backgrounds.

 For their part, my partners bring the heat on wheels (Turntables with actual Vinyl Disc) and mixed up some strange and dark rap tracks with Sci.Fi interludes I digged from Horror Z movies! The mixtapes (yeah it was K7!!!) gone away pretty well and we proudly gave birth to 4 volumes.

The First two volumes “The Horrorap Vault” and “Crumbs County Delights” only on Tapes!!!

3rd volume, “Galactic Snatchers”, on Tapes & CD’s.

4th volume, “Escape from Kaïhoro”, the last one only on CD’s.

This one could have been the 5th episode, but we never ended it..then stopped with that Astro shit and all gone to something else, return to listen to Jay!

We had a dynamic forum called the “Wankers Club” with hundred of people selected by ourselves (it was private). We dont gain any money of this but we spent good geek times! hahaha! The press also gave us some credit with a few articles in the major rap magazines and internet webzines.

Look! we’re so famous, Kendra & Tera Get on the Mack Truck for a dirty ride throught space!

I’ve  passed by the forum a few months ago and was surprised some dudes still posting shit! Peace to my Kaihoro’s Homies aka Sop’ Digithugz and Shone6Mob. I have to shoot out some of our 3rd class aliens down here : FreddyMack, Gnusball, Spiff 2, Mastarz, Kranker, Deyz, KingzrunLines, Tacteel, Bleu Pav, Lester, Soaf, Piggletos, Bewo, GrimReapper, Fitt Slick, Maki, Drunken Mast, Gramercy, Filiz, Blastmasterz, H3r4, Chestburster, Chaosmonger, Pornokidz, Rage87, Hardaway, Supervillaine, Ashes, Lost Emp, Ash Bolt, Elger, Ra…many many more i cant remember. -KoolFunc’88 (aka Dirtwolff)  

Here’s the 4 volumes available for free download. (Tracklistings and artworks included). Both links are for the entire mixtapes, just different servers for backup purpose. ASTROBASTARD VOL.1 “THE HORRORAP VAULT” Link 1 / Link 2. ASTROBASTARD VOL.2 “CRUMBS COUNTY DELIGHTS” Link 1 / Link 2. ASTROBASTARD VOL.3 “GALACTIC SNATCHERS” Link 1 / Link 2. ASTROBASTARD VOL.4 “ESCAPE FROM KAÏHORO” Link 1 / Link 2.

Straight from the last edition of Vans Syndicate line, the Jason Jessee sk8-hi model, full leather! They’re looking amazing. Since i have worked something with em’ for the opening of a pop-up store in paris, i’m waiting mine!!!! (more infos on the Syndicate Store Paris coming soon.) -KoolFunc’88

Thanks Caliroots for the picts.

Hillcrest Sandwich Shop

What’s better than a Cheese Enchilada? It’s a Cheese Enchilada in a cup!

I couldn’t believe such a unique treasure could come out of a sandwich shop. This mouthwatering deliciousness wasn’t just a cup full of beans, cheese and fresh veggies that made me crave that 2nd and 22nd bite, it was the secret stuff in between and the tortilla chips floating atop. As the soup splashed around on my tongue, the warmth of heat and spiciness made my taste buds dance with happiness and joy, making this the perfect complement to my favorite sandwich, the Turkey in the Garden.

If you haven’t been to the Hillcrest Sandwich Shop before, GO NOW! It is an added gem to the Hillcrest location, especially for the health conscience, on-the-run individual. Their soups are prepared fresh, but the variety changes daily, so if you don’t get to try the Cheese Enchilada, I’d love to hear what ends up in your cup!

“Cathedral #1″

Image Copyright © George Cannon, All Rights Reserved.

Review

Feature

• One of Europes top selling brand now in the U.S.
• Great quality and style for an amazing price.
• For more info, vist www.sykousa.com
• No need to shop around. Our price is the absolute lowest. You will not find a lower price, Guaranteed.

Overview

DOT Approved. Polycarbonate Shell. Eps inner shell. Quick Release Strap.Dual vented sehll. Anti scratch visor system. Ultra Soft Lining.

Specifications

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Nov 23, 2009 07:20:06

Men’s Watches Reviews Golf GPS Best Buy Reviews

I forgot to upload more photos from my trip to Wisconsin during late October; my sincerest apologies.  I’m glad there is some material to toss-up though.  I have gotten quite busy as of late and the weather has been ugly so those are two excuses I’ve gathered in passive voice to make it seem that it might not be all my fault that I haven’t produced many new photos to share.

Self-loathing and poor writing skills aside, I’ve been interested in getting better at shooting faces. Expressions, emotions, and just good old people-faces. Since I don’t have any sort of reputation or experience or portfolio, I can’t get people – and I feel strange requesting for subjects – to allow me to photograph them.

I typically dislike posed pictures – through my lens, anyway. So the impromptu photojournalistic ways I have been able to practice with people has fit nicely. However, I’d like continue that unforced look while shooting a couple or individual that might like to have some shots of themselves or their kids (for their families or engagement or wedding or band or actor portfolio or gang initiation or sex offender registry).

But I digress. Here are shots strictly from that weekend in Wisconsin that fit into my ‘Faces in the Crowd’ project.

~

~

~

~

~

~

~

~

~

~

~

~

~

~

~

~

~

~

~

~

~

~

~

~

~

Went to Richmond this past weekend, just to get out of the city for a couple days. Was super relaxing and I got some pretty great shots. Check them out:

Le Bouquiniste

21 Nov. 2009, Bucharest. Mr. Victor, bouquiniste, is selling used books at the window of his house situated on No. 30 Batiște Street.