Blogs about: Wood Kayak
Featured Blog
Spring Run (part 2 finishing the hull)
11/06/09 Well it is time to work on the inside of the Hull while I continue to work on stripping the deck. After scraping and sanding the inside I mixed up some fillet compound (epoxy, woodflour, an… more →
Kayakkev's Blog
Spring Run (part 2 finishing the hull)
— 1 comment
kayakkev wrote 2 months ago: 11/06/09 Well it is time to work on the inside of the Hull while I continue to work on stripping t … more →
Spring Run (part 1 the begining The Hull)
— 3 comments
kayakkev wrote 2 months ago: 09/16/09 Today I finished glueing everything on the hull. Now it is time to start working the pla … more →
Redfish King (part 7 Delivery)
— 2 comments
kayakkev wrote 3 months ago: Truck loaded and all hooked up for the trip. I wrapped the new Yak in a “Danu” cover to … more →
Redfish King (part 6 Finished)
— 2 comments
kayakkev wrote 3 months ago: Specs; Length 17′ 9″ Width 20 1/2″ Deck Height 11 1/2 … more →
Redfish King (part 5 finishing)
— 3 comments
kayakkev wrote 4 months ago: 08/01/09 As of today I now have 5 coats of varnish all the way around and have used about 1 1/2 q … more →
Redfish King (part 4 glassing)
— 1 comment
kayakkev wrote 5 months ago: 07/01/09 Well, it is offical, this is now a Kayak!!! And this next pic is for daydreaming of seeing … more →
Redfish King (part 3 building the deck)
kayakkev wrote 5 months ago: 06/22/09 This morning I worked on cutting down the excess of the combing that hung below the deck, … more →
Redfish King (part 2 building the hull)
— 1 comment
kayakkev wrote 6 months ago: 05/11/09 Finished shaping the hull today And I put a sealer coat of epoxy on half of the hull sealin … more →
Redfish King (part 1 getting ready)
— 2 comments
kayakkev wrote 7 months ago: 04/09/09 While I was away kayaking a revelation hit me. I strung the forms wrong. For some reason … more →
My Guillemot L (part 2 finishing)
— 3 comments
kayakkev wrote 8 months ago: 04/04/09 Today I put the fifth and final coat of varnish on the deck after spending the day with Joh … more →
My Guillemot L (part one building)
— 3 comments
kayakkev wrote 10 months ago: 02/18/09 Well I have been busy fairing, and sanding on the boat, and today I put a seal coat of epox … more →
My First Wood Strip Kayak
— 3 comments
kayakkev wrote 1 year ago: In April 2008, I decided to try my hand at making a wood strip kayak. So I got on WWW.CLCBoats.com … more →
Carrying Handles
kayakkev wrote 6 months ago: Okay everyone, I am now looking for the perfect profile for carry handles. The ones I made for the … more →
Guillemot L (part 4 in the water)
— 1 comment
kayakkev wrote 7 months ago: 04/19/09 After some modifacations I used this boat for “Water Safety” for a local swim … more →
My Guillemot L (part 3 trimming it out)
— 3 comments
kayakkev wrote 7 months ago: 04/12/09 For those of you following my progress, you know that I am trying to move out of the shop I … more →
Chesapeake 17, a Yak from Down Under
kayakkev wrote 8 months ago: The following pics are of the yak a Aussie I befriended from the CLC builders forum built. It is h … more →
Making a Skeg for a wood yak
kayakkev wrote 10 months ago: On my Guillemot L, I decided to make a skeg in the same manner that P&H does theirs. Havin 3 ca … more →
Spring Run
kayakkev wrote 10 months ago: There is not a lot to say about this yak, I haven’t started it yet. Hahahaha This will be my … more →
