Betapapun tidak berartinya hamba, setidaknya komen asal-asalan saya tentunya menambah statistik jumlah komen di blog Anda seru sekalian alam. Untuk itu perkenankanlah hamba untuk memohon maaf hingga awal Desember nanti belum bisa sekedar meninggalkan jejak di rumah Anda *menjura hormat*

Disamping itu. alasan lain mengabaikan blogosphere adalah saya sedang mengusahakan poligami dengan gadis bersahaja, setelah sekian lama ditemani si wanita cantik (tersipu).

Untuk penjelasan analogi gadis cantik, gadis bersahaja, dan cewek matre silahkan dibaca di blognya Penguasa Zencafe… abaikan saja screenshot yang ada disana

Dulu memang pernah kenal sebentar dengan Zencafe yang tipikal gadis desa nan bersahaja. Tapi akhirnya berpaling dan hidup bersama dengan gadis kota nan cantik Ubuntu (dan variannya).

Namanya cinta…tidak bisa ditutup-tutupi. Bagaimanapun saya mengabaikannya. Tapi saya juga masih enggan meninggalkan kota yang memang mudah, gaul dan senang berdandan. Meski punya standar sendiri.

Demi memenuhi rasa rindu saya. Akhirnya, saya mencoba untuk backstreet selingkuh dengan Slackware 12.2.

Benar saja,
Namanya juga selingkuh, dan kurangnya pengalaman saya. Semua jadi berantakan. Ubuntu ME 8.04 yang sudah setia menemani saya kemana-mana, hengkang meninggalkan saya. Rujuk kembali pun tidak bisa, karena DVD instalasinya sudah banyak goresan (salah saya juga, karna DVD saya bawa kemana cuma dibungkus plastik).

Akhirnya saya hidup bersama dengan Gloria.

Meski begitu,
hasrat hati tidak bisa dipadamkan begitu saja.

Akhirnya,
setelah saya rasa modal cukup untuk bisa bersikap adil.
Saya beranikan diri mengungkapkan niat saya pada Gloria.

Sukurlah, Gloria menyetujui niat saya berpoligami. Asal tidak dengan cewe matre itu

Dipinanglah gadis desa nan bersahaja, Slackware 13  (tersipu)

Seperti yang sudah saya bayangkan.
Kesulitan pertama adalah menyandingkan Lilo Slackware dengan Grub Linux Mint 7 (Gloria). Sebetulnya ada yang mengulas Super Grub. Tapi belum ketahuan apakah bisa menyandingkan Lilo dan Grub.

Setelah gugling dan bereksperimen sepuasnya. Akhirnya ketemu maharnya :

Kesulitan kedua adalah X-Server (tampilan Desktop) yang tidak muncul. Ini mebingunkan saya. Karena versi sebelumnya, 12.2, langsung bisa memunculkan X-server.

Benar saja,
ketika saya intip dalemannya menggunakan rayuan :
#vim /etc/X11/xorg.conf

Terlihat semua dalam default 0 (nol).
Waduh, mana tau saya angka-angka yang harus saya isikan disitu. Hasil gugling pun belum menunjukkan hasil yang menjanjikan.

Petunjuk dari Allah diberikan pada pagi hari saat saya sedang mendinginkan kepala (worship)
Mendadak muncul ide untuk menginstall dulu Slackware 12.2, saya simpan /etc/X11/xorg.conf -nya ke Linux Mint 7. Kemudian, saya install lagi Slackware 13 (menggantikan Slackware 12.2).
File /etc/X11/xorg.conf yang tadi disimpan, saya kopas ke Slackware melalui bantuan si cantik Gloria, dengan gedit-nya. Cara ini bisa lebih singkat, andai saja saya masih punya cukup space hardisk buat install 2 versi Slackware sekaligus, tapi koleksi 3 gp begitu berharga

Default anak-cucu Slackware tidaklah langsung log-in masuk ke desktop. Maka, setelah menggelitikkan :
$startx

X-server pun dapat tertampil dengan cantik.

Masalah berikutnya adalah, mengajarkan si gadis desa ini untuk berkenalan dengan internet.
Karena menggunakan Telkomsel Flash, sebetulnya cukup menggunakan program bawaan : KPPP.
Tapi memang, segalanya tidak bisa dibiarkan berjalan mudah oleh pasangan baru ini….ughhh,bikin gemes saja…(cubit-cubit-gemes)

KPPP sesaat Enable Modem” langsung saja macet. Ini sama kasusnya dengan distro mini turunan Slackware, Slack versi 6.1.1. Padahal Slack versi seblumnya, 6.0, tidak ada masalah dengan KPPP.

Akhirnya mengalihkan ke pilihan ke si powerfull Wvdial. Tidak seperti gadis kota yang butuh banyak dependency (ketergantungan paket), gadis desa ini cukup nerimo dengan 2 paket saja. Yaitu install Wvstream dulu baru Wvdial. Tidaklah boleh alpa untuk log-out atau restart dahulu setelah terinstall rapi. Karena menggunakan Telkomsel Flash, maka saya menggunakan settingan /etc/wvdial.conf  dari sini.

Si bersahaja Slackware 13 pun terhubung dengan dunia-maya nan luas.

Saya senang,
Gloria sebagai pasangan tua, cukup pengertian dengan pasangan muda saya. Bahkan Gloria tidak segan-segan meminjamkan Gedit dan Nautilus-nya buat mengeksplorasi bagian-bagian Slackware. Gloria juga tidak pelit meminjamkan koneksi internetnya buat cari cara mengenalkan pasangan muda saya dengan internet.

Di satu sisi.
Namanya pasangan baru, apalagi begitu sederhana dan penurut bahkan untuk diajak gaya seekstrim mungkin,
tentulah semakin lama semakin melenakan,
masih begitu banyak jengkal bagiannya yang belum saya eksplorasi.

Tapi,
saya harus menahan diri. Garis-mati kurang dari seminggu lagi. Saya harus kembali ke pasangan lama saya, Gloria.

Sabar ya, sayang…
sementara waktu, bersabarlah dengan koneksi ke dunia maya dan sedikit make-up yang saya nafkahkan ke kamu, dan kini sudah kau kenakan :

Después de un tiempo sin colocar un post, me decidí a escribir un post sobre como configurar un modem tigo HUAWEI  para Guatemala utilizando wvdial, probado con varios modems en especial para el modelo E160.

Para ello se necesita instalar dos paquetes, disponibles desde slackbuilds.org wvstreams y wvdial y ejecutar luego como root

# wvdialconf

y luego de que nos genere la configuración para nuestro modem podemos configurarlo como el siguiente ejemplo, ya sea añadiendo o modificando las líneas del archivo de configuración.

[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = AT+CGDCONT=1,”",”broadband.tigo.gt”
Modem Type = Analog Modem
Phone = *99#
Modem = /dev/ttyUSB0
Username = tigo
Password = tigo
Baud = 460800

dependiendo de la velocidad del modem habrá que ajustarlo.

Para terminar solo deben ejecutar

# wvdial

Si les funciona la configuración para otros tipos de modem pueden dejar su comentario para ir incrementando la lista de modems que funcionan con estos datos.

Ubuntu 9.10

If you have upgraded to (or had a fresh install) of Ubuntu 9.10 you would definitely have encountered many problems and bugs . My advice would be to connect to the internet and perform a full update as soon as you can .

If you are a mobile broadband user , connecting to the internet in itself would be a major problem . The revamped network manager in 9.10 is exceptionally buggy and i have read of a lot of complaints from users (across the world) of having had problems with using mobile broadband .Native support is in-built for almost all mobile broadband ISPs (of India) theoretically and yet practically a lot of them dont work .

Problem:

Network manager will detect your modem correctly but will refuse to connect to the internet .

Solution:

A bug report was filed by a Reliance Netconnect Broadband+ user . An update may have been released  by the developers  as many users have reported that the Network manager started connecting to the internet successfully after an update .

So update your karmic Koala using another connection .

Workaround: (Use Wvdial)

If you like me dont have another connection , boot up windows and download the wvdial software for karmic koala install it in ubuntu and use it to connect to the internet and update your system .

Procedure

1. Download the following files (in windows or any other machine) and install them in ubuntu

If you have an intel processor select the i386 links and in the next page select an Asian server .

Dependencies

http://packages.ubuntu.com/karmic/libwvstreams4.6-base

http://packages.ubuntu.com/karmic/libwvstreams4.6-extras

http://packages.ubuntu.com/karmic/libuniconf4.6

2. next download and install wvdial in your Ubuntu

Wvdial

http://packages.ubuntu.com/karmic/wvdial

wvdial is installed in your Ubuntu machine !

3. Now follow this guide to setup your connection using wvdial in ubuntu

http://reliancewireless.wordpress.com/2009/05/01/setting-up-your-reliance-broadband-connection-in-linux/

PS : I am guessing people using the newer Huawei EC1260 modem may have more problems with the network manager .

In ubuntu jaunty jackalope, when you plug in your datacard/EDGE USB modem, a dialog appears automatically to configure your country and networks. But since the country (Bhutan) was not included in the country list it was not possible to connect my datacard. So the journey to search for a solution began.

After searching google for sometime to connect EDGE USB modem to my ubuntu jaunty jackalope, i finally manged to get it working.

Here is what needs to be done:

Firstly install package wvdial > sudo apt-get install wvdial

After the installation is finished do > sudo wvdialconf

This should output something like this:

.

.

Scanning your serial ports for a modem.
.

.
ttyACM0<*1>: ATQ0 V1 E1 — OK
ttyACM0<*1>: ATQ0 V1 E1 Z — OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 — OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 — OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 — OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 — OK
ttyACM0<*1>: Modem Identifier: ATI — Sunplus mM Inc.
ttyACM0<*1>: Speed 4800: AT — OK
ttyACM0<*1>: Speed 9600: AT — OK
ttyACM0<*1>: Speed 19200: AT — OK
ttyACM0<*1>: Speed 38400: AT — OK
ttyACM0<*1>: Speed 57600: AT — OK
ttyACM0<*1>: Speed 115200: AT — OK
ttyACM0<*1>: Speed 230400: AT — OK
ttyACM0<*1>: Speed 460800: AT — OK
ttyACM0<*1>: Max speed is 460800; that should be safe.
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 — OK

Found an USB modem on /dev/ttyACM0.
Modem configuration written to /etc/wvdial.conf.
ttyACM0<Info>: Speed 460800; init “ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0″

Then after the usb modem is detected, edit the /etc/wvdial.conf

The /etc/wvdial.conf should look something like this now:

[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = USB Modem
Phone =
ISDN = 0
Password =
New PPPD = yes
Username =
Modem = /dev/ttyACM0
Baud = 460800

If  it does look like above then copy paste this into the /etc/wvdial.conf

[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = AT+CGDCONT=1,”IP”,”internet”
Modem Type = USB Modem
Phone = *99***1#
ISDN = 0
Password = xyz
New PPPD = yes
Username = xyz
Modem = /dev/ttyACM0
Baud = 460800
Stupid Mode = 1

Then finally do > sudo wvdial

You will see like this:

–> WvDial: Internet dialer version 1.60
–> Cannot get information for serial port.
–> Initializing modem.
–> Sending: ATZ
ATZ
OK
–> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
–> Sending: AT+CGDCONT=1,”IP”,”internet”
AT+CGDCONT=1,”IP”,”internet”
OK
–> Modem initialized.
–> Sending: ATDT*99***1#
–> Waiting for carrier.
ATDT*99***1#
CONNECT
~[7f]}#@!}!(} }<}!}$}&@}#}$@#}%}&&[1e]}3,}”}&} } } } }’}”}(}”Gu~
–> Carrier detected.  Starting PPP immediately.
–> Starting pppd at Mon Nov 16 11:11:44 2009
–> Pid of pppd: 17459
–> Using interface ppp0
–> pppd: ���
–> pppd: ���
–> pppd: ���
–> pppd: ���
–> pppd: ���
–> pppd: ���
–> pppd: ���
–> local  IP address 172.**.*.**
–> pppd: ���
–> remote IP address 10.*.*.*
–> pppd: ���
–> primary   DNS address 202.144.***.***
–> pppd: ���
–> secondary DNS address 202.144.***.***
–> pppd: ���

This is how you can connect your usb modem in ubuntu. I hope it will work for u guys too.

Well I using Tata plug2surf for my laptop since 2 years. First in mandriva 2007, 2008 and 2009 in my desktop. When I have a laptop then I installed ubuntu jaunty on this and configure tata plug2surf. For Both distribution plug2surf work fine. however it is too slow comparison to new broadband plans in market. But for few reasons I stayed with it till now.

When Tata launch the Photon with speed in Mbs. Its my time to check it. For my goodness One of my friend purchase the stick and installed on his vista machine. But when He tried on his fedora things not going smoother. Then he want assist on this matter. I tried with plug2surf way, But it not worked. Then I go for further assistement first on google then on ILUGD (Indian linux group delhi), And after some wait I got solution which I tried on my Ubuntu.

Now i am going to give the description how I set it all (I am very thankful to Mr. Varad gupta which assist me on ilugd mailing ).

First check whether your system have following package or not.

Modprobe, depmod, modeswitch.

On Ubuntu jaunty first two package is default installed while I have to download and installed third package.

There are a big reason to install this. One of my friend tell me about difference between 2 of Tata’s products plug2surf and photon. Plugsurf default detected as USB modem in linux So there is no need for so much steps for nstall modem. While Photon is not detected as modem, So first we need to taken this step. First There should be modeswitch-usb package should be installed on your linux system. I get deb package from

http://packages.ubuntu.com/karmic/i386/usb-modeswitch/download

i) First, check  data card vendor and product by lsusb command.

@@ Output look like a below lines and first high light word is vendor
and second is product.
# lsusb
Bus 002 Device 002: ID eb1a:5060 eMPIA Technology, Inc.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 148f:2573 Ralink Technology, Corp. RT2501USB Wireless Adapter
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 004: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
Bus 003 Device 003: ID 1b7d:0700  

Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

@@
After plugin the device I found one extra entry (second last row in above output)

ii) Now, load usbserial module by the help of below modprobe and depmod
command.

@@ Again replace vendor and product with your vendor and product,,
# sudo modprobe usbserial vendor=0x1b7d product=0x0700
# sudo depmod -a

iii) Now change device mode to USB by usb_modeswitch command

# sudo usb_modeswitch -v 0x1b7d -p 0x0700 -d 1
# sudo usb_modeswitch -v 0x1b7d -p 0x0700 -H 1

iv) Check usb device location by command

# sudo wvdialconf /etc/wvdial.conf

I get ttyACM1 detected as USB device,

Edit, dailer configuration, You only have to change Username and

Password parameters. Replace first XXXXXXXXXX with username and second XXXXXXXXXX with your passowrd ( it also may be same as Username ).
@@
# vim /etc/wvdial.conf
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Stupid Mode = 1
Modem Type = USB Modem
ISDN = 0
Phone = #777
New PPPD = yes
Modem = /dev/ttyACM1
Username = XXXXXXXXXX
Password = XXXXXXXXXX
@@
v) Finally, start dial,,,,
# sudo wvdial

Note : – Because most commands require root user level permission, So i used sudo in commands, You can choose your options depend on your distribution.

Hi guys,

In Tamilnadu most of the mobile operators stopped their GPRS service which is used to connect our pc’s to internet.Now our only hope is Aircel.They are the only one offering pocket internet service which is affordable for most of the peoples.In linux you can connect to internet via your mobile by using the application wvdial.( For more info about wvdial read my previous post ).Here is the wvdial configuration file for aircel.

//wvdial.conf

[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = AT+CGDCONT=1,”IP”,”aircelgprs.pr”
Modem Type = USB Modem
Baud = 460800
New PPPD = yes
Modem = /dev/ttyACM0
ISDN = 0
Phone = *99***1#
Password = aircel
Username = Aircel
Stupid Mode = 1

Delete all the contents of youe wvdial.conf and place the text above.Thats all. whoo…Hope you ll be connected..;-)

Thank you Dharanitharan.( He is the one who is using aircel pocket internet in his linux box through wvdial)

cheers,

Add a wvdial.conf file in /etc with the following contents

_______________________________________________

[Dialer username]
Phone = *99#
Username = 1234567890
Password = 7890
New PPPD = yes
Modem = /dev/ttyUSB0
Baud = 115200
SetVolume = 0
[Modem 0 ]
Dial Command = ATDT
Init = ATZ
init2 = AT + CRM = 1
Flowcontrol = ( CRTSCTS )
Stupid Mod = 1
Inherits = Modem 0

_________________________________________________

Note:

1234567890 – in this place put the number
7890 – put the last 4 digits of the number

Check the /dev file to find whether ttyUSB0 is available.If not change it to available one.

Save the changes and reboot (not a necessity)

Give wvidal username at the prompt and wait for sometime to get connected.

Happy browsing!

Tak sesulit sebelumnya untuk setting modem buat terhubung dengan dunia maya. Saya pakai modem Huawei 156 – IM2 di Ubuntu 9.04. Tulisan ini hasil penerapan tutorial dari blog ini. Namun setelah dicoba tidak jalan. Akhirnya mengkombinasikan perintah wvdial yang ada di sini. Akhirnya terhubung ke dunia luar.
Tapi jangan lupa pasang wvdial dulu di ubuntu ya. Tapi kalau gak punya dvd repository terpaksa anda mesti donwload file deb dari komputer yg bisa koneks internet dahulu.

http://id.archive.ubuntu.com/ubuntu/pool/main/x/xplc/libxplc0.3.13_0.3.13-1build1_i386.deb

http://id.archive.ubuntu.com/ubuntu/pool/main/w/wvstreams/libuniconf4.4_4.4.1-0.2ubuntu2_i386.deb

http://id.archive.ubuntu.com/ubuntu/pool/main/w/wvstreams/libwvstreams4.4-base_4.4.1-0.2ubuntu2_i386.deb

http://id.archive.ubuntu.com/ubuntu/pool/main/w/wvstreams/libwvstreams4.4-extras_4.4.1-0.2ubuntu2_i386.deb

http://id.archive.ubuntu.com/ubuntu/pool/main/w/wvdial/wvdial_1.60.1+nmu2_i386.deb

Setelah itu klik ganda masing-masing file deb itu.

Berikut ini yg saya terapkan pada ubuntu 9.04 dengan mengedit file wvdial.conf yang bisa di akses dari folder /etc/wvdial.conf sebagaimana tertulis di bawah ini. Ngedit file wvdial.conf ya tinggal klik ganda file itu saja kalau sudah silahkan simpan.

[Dialer usb]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
init3 = AT+CGDCONT=1,”IP”, “indosatm2″
Modem Type = USB Modem
Dial Command = ATDT
Stupid Mode = 1
New PPPD = yes
Baud = 460800
Modem = /dev/ttyUSB0
ISDN = 0
Phone = *99#
Password = tuliskan password di sini
Username = tuliskan nama pengguna pada saat register di IM2 di sini
ISDN = 0
Auto DNS = 1

Untuk terhubung dengan dunia maya buka “Terminal-Konsole” kemudian ketik di layar terminal itu:
su -c “wvdial usb”
Masukkan password root di ubuntu anda.

Selanjutnya buka web-browser anda.

Selamat menikmati.

AUTOMATIC:

Any one can connect internet with mobile and other gprs edge modem in ubuntu.Fortunately, Ubuntu 9.04 supports automatic detection and configuration of mobile modem and usb modem for any country that supports mobile internet(gprs or edge) that means mobile broadband.Plug your gprs/edge modem supported mobile or usb modem to computer(most of the usb modem is supported by now.)A new window will open and will ask you to select your country and mobile operator.After a few seconds click on your network icon (normally placed in the right corner of the upper panel).You will find a new menu named with your mobile network which was not there before plugging your mobile or modem.Select that one.after a few second you will be connected with internet.open your favourite web browger (mine mozilla) and serf any web site you want.

Manually:

Plug your mobile modem(usb modems may work in this way).Open a terminal.Type “sudo su” then type “wvdialconf” some text will come up on terminal,and there will be a line look like “Found a modem on /dev/ttyUSB2” or similar to this.If the line does not appear in the terminal,that means there is no modem or there are some other problems.Now type “gedit /etc/wvdial.conf“.A text editor will come up with some text looks like

Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = Analog Modem
Baud = 9600
New PPPD = yes
Modem = /dev/ttyUSB0
ISDN = 0
; Phone = <Target Phone Number>
; Password = <Your Password>
; Username = <Your Login Name>

Change the text like this:

[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = AT+CGDCONT=1,’IP’,’gpinternet‘
Modem Type = Analog Modem
ISDN = 0
Phone = *99***1#
Modem = /dev/ttyUSB0
Username = xyz
Password = xyz
Baud = 115200

Just change the red coloured text with yours.Contact your mobile opreator for those settings.here ‘gpinternet is the APN(access point) for my mobile Operator.Save the file.Now type “wvdial” to connect the internet.

Done.

Ini diambil dari http://bengkelinux.wordpress.com/2009/10/10/c-700-smart-phone-modem-on-slackware/ yang disarikan ulang untuk Ubuntu (pada prinsipnya sama sih, hanya beda perintah instalasi paket wvdial

Smart kembali mengenalkan hape modem termurah yaitu haier c700 dan zte c261 sedikit lebih mahal dari seri hp modem pertama haier D1200p, hp ini di banderol dengan harga 399 ribu. Mungkin karena fiturnya yg makin lengkap seperti mp3 player, speakerphone, dan opera mini (lebih baik dari pada opera mini j2me dan dibawah opera mini Symbian). Di situs resminya www.smart.co.id hp haier dan zte ini hanya compatible dengan windows dan macintosh saja ( driver modem ada di cd bawaan). Karena komputer hanya terinstall 3 OS yang semuanya adalah Linux dengan varian: Xandros OCE, Slackware 12.1, Debian. Maka harus mengerahkan kesabaran untuk mencoba-coba dan banyak hunting informasi. Beberapa informasi yang didapat dari internet mengenai setting C700, D1200p dan modem cdma lainnya:

http://loserkidzz.wordpress.com/2009/01/11/modem-smart-d1200p/
http://pecenx.multiply.com/journal/item/11/usb_modem_cdma_di_slackware_12
http://blog.andrina.web.id/2008/10/internetan-dengan-hp-cdma-haier-c6000.html
http://heart-rachmad.blogspot.com/2009/05/modem-cdma-menggunakan-hp-zte-c300-pada.html
http://forum.linux.or.id/viewtopic.php?f=34&t=19477&p=116500&hilit=smart+modem#p116500

Tidak cukup hanya membaca informasi-informasi dari link-link diatas, namun perlu dicoba/dipraktekkan. Langkah-langkah nya:

Cari tahu vendor dan product dari usb device, dengan menggunakan perintah “lsusb”, dari hasil command tersebut dapat diketahui bahwa vendor=05c6 dan product=9004.

#lsusb

Bus 001 Device 002: ID 05c6:9004 Qualcomm, Inc.
Bus 001 Device 001: ID 0000:0000
Install module driver usb device C700, karena diketahui bahwa modul driver Qualcomm ada pada module usbserial maka gunakan perintah modprobe module_driver option.

#modprobe usbserial vendor=05c6 product=9004

Untuk mengetahui apakah driver sudah terload dan dapat mengenali peralatan, gunakan perintah dmesg:

#dmesg

usb 1-2: new full speed USB device using uhci_hcd and address 2
usb 1-2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
usbserial_generic 1-2:1.0: generic converter detected
usb 1-2: generic converter now attached to ttyUSB0
usbserial_generic 1-2:1.1: generic converter detected
usb 1-2: generic converter now attached to ttyUSB1
usbcore: registered new interface driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core

Lakukan symbolic link /dev/ttyUSB1 ke /dev/modem,

#ln -s /dev/ttyUSB1 /dev/modem

Bila wvdial belum terinstall, coba anda cari DVD infolinux yang sesuai dengan Distro Ubuntu anda

$sudo apt-get install wvdial

Buat file konfigurasi di /etc/wvdial.conf, dengan isi sebagai berikut:

[Dialer smart777]
Modem = /dev/ttyUSB1
Modem Type = Analog Modem
Init1 = ATZE0Q0V1
Init2 = ATE0Q0V1
Init3 = AT
Init4 = ATQ0 V1 E1 S0=0 +FCLASS=0
Baud = 230400
FlowControl = CRTSCTS
ISDN = 0
Dial Command = ATDT
Phone = #777
Ask Password = 0
Username = smart
Password = smart
Stupid Mode = 1
Auto DNS = 1
New PPPD = yes
Compuserve = 0

Jalankan wvdial smart777, (harus root atau pakai sudo)

#wvdial smart

–> WvDial: Internet dialer version 1.60
–> Cannot get information for serial port.
–> Initializing modem.
–> Sending: ATZE0Q0V1
ATZE0Q0V1
OK
–> Sending: ATE0Q0V1
OK
–> Sending: AT
OK
–> Sending: ATQ0 V1 E1 S0=0 +FCLASS=0
OK
–> Modem initialized.
–> Sending: ATDT#777
–> Waiting for carrier.
ATDT#777
CONNECT
–> Carrier detected. Starting PPP immediately.
–> Starting pppd at Sun Oct 11 02:13:39 2009
–> Pid of pppd: 2950
–> Using interface ppp0
–> pppd: hô·[10][06][08]h[06][08]
–> pppd: hô·[10][06][08]h[06][08]
–> pppd: hô·[10][06][08]h[06][08]
–> pppd: hô·[10][06][08]h[06][08]
–> local IP address 10.12.21.169
–> pppd: hô·[10][06][08]h[06][08]
–> remote IP address 10.20.4.12
–> pppd: hô·[10][06][08]h[06][08]
–> primary DNS address 10.17.3.254
–> pppd: hô·[10][06][08]h[06][08]
–> secondary DNS address 10.17.3.252
–> pppd: hô·[10][06][08]h[06][08]

Cek koneksi,

#ifconfig

ppp0 Link encap:Point-to-Point Protocol
inet addr:xx.xx.xx.xxx P-t-P:xx.xx.x.xx Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:26729 errors:675 dropped:0 overruns:0 frame:0
TX packets:24379 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:33127169 (31.5 MiB) TX bytes:2046483 (1.9 MiB)

$ping www.google.com

PING www.l.google.com (216.239.61.104) 56(84) bytes of data.
64 bytes from sin01s01-in-f104.google.com (216.239.61.104): icmp_seq=1 ttl=242 time=2958 ms
64 bytes from sin01s01-in-f104.google.com (216.239.61.104): icmp_seq=2 ttl=242 time=2950 ms

64 bytes from in01s01-in-f104.google.com (216.239.61.104): icmp_seq=8 ttl=242 time=641 ms
64 bytes from sin01s01-in-f104.google.com (216.239.61.104): icmp_seq=9 ttl=242 time=598 ms
64 bytes from sin01s01-in-f104.google.com (216.239.61.104): icmp_seq=10 ttl=242 time=379 ms
time=2950ms … ?, lama sekali responnya, pasti b/w kecil. Jika dilakukan ping ke DNS  tidak ada respon. Maka edit file /etc/resolv.conf, tambahkan:

search smart.com
nameserver 207.132.116.5
nameserver 202.43.178.245
nameserver 10.17.3.254
Buka WEBrowser, mainkan !!!

Note: There’s more info on this subject here. So take a look if this post doesn’t do it for you.

Be aware that all my experience of this subject is based on Ubuntu. If you use another Linux distro, YMMV. If you’re using Windows or OSX… you’ll probably be better off looking elsewhere.

Some time ago I bought a new phone – Sony Ericsson K800i. It’s a 3G phone, so I was pretty stoked: at last I’d be able to get a decent connection speed when linking my PC to the internet through this baby. And I was right: I get between 40 and 100 Kps (320-800 Kbps). Maybe those of you with wired broadband connections think this is dead slow. It probably is, to you. But to someone who’s previously had to depend on a sluggish GPRS connection, my new phone is like amphetamine on crack.

And it is so much easier to connect via this phone than it was through my previous handsets. All I need to do with my K800i is:

1. Press Menu > Settings > Connectivity > USB > USB Internet;

2. Select USB Internet On;

3. Connect phone to PC with USB datacable (the K800i also has bluetooth and infrared, but my computer is not equipped for such things);

4. Select Phone Mode;

and that’s it! The Ubuntu network manager detects the phone and automagically sets up the connection. Sweet or what! (Remember, this is with the Sony Ericsson K800i. Other phones will be different.

Unfortunately, it isn’t always like that. I don’t know if it’s just my phone or what, but connection is very unreliable. It cuts out erratically, and I haven’t found a fix yet. So on bad days I find I have to use wvdial to connect. I’ve described this in detail before – I’m not going to go into it again. Click here to go to the wvdial tutorial.

Thing is, mobile phone service providers have got something against their customers using their cellphones this way. It’s called “tethering”, and it is generally banned in the Terms and Conditions they make you agree to when you get your phone. And some providers actively block tethering. My provider obviously doesn’t block it. But that might change any day.

Why do they dislike tethering? Because they want you to buy a Mobile Broadband USB modem, and pay an inflated rate for mobile internet connection. Rip-off merchants!

Because I wanted another way to connect to the internet other than my phone, I bought one of these USB modems – a Vodafone K3565, aka the Huawei E160X. To connect via this device, Vodafone (UK) charge me £15 per GB of data transferred. This is shockingly expensive compared to what I pay for connection through my cellphone (£2.50 for 5 days’ “unlimited” browsing). But it is a better connection much of the time, when I get Vodafone’s HSDPA signal. Transfer speeds over HSDPA can get as highh as 160 Kps (1280 Kbps). But if I’m in an area with no HSDPA or 3G signal, I get snail’s rate GPRS. Which hurts when you’re paying the con men so much.

It’s also extremely easy to connect an Ubuntu PC to the internet via a Huawei dongle. Similar to the phone: plug it in, wait a short while, and the network manager detects the device and connects. The first time you connect the dongle to the computer, network manager throws up a mobile broadband wizard, which asks you a few questions about your service provider etc. And that’s it. Well, usually that’s it. Sometimes you have to manually edit the settings before it’ll work. But that will depend on whose service you’re using.

Also, I understand that although Huawei devices play nice with Ubuntu, some other manufacturers’ models don’t. If that’s the case for you, wvdial is probably the answer. Again, click here to find out how to use wvdial.

There’s another solution, if you’re having problems: an app called Vodafone Mobile Connect. Don’t let the word “Vodafone” in the name put you off – it actually works with devices on any provider’s networks. I used it for a while very successfully. I can’t give you any real advice about it, as it’s in constant “beta” development. But the only reason I stopped using it was the fact that Ubuntu’s network manager does the job just fine. It’s certainly worth checking out if you’re having problems. There are binaries available for many Linux distros.

Well, I think that’s about it. So, let me just wish you the best of luck in connecting to the internet with your device. And I’ll bid you farewell!

_gos=’c4.gostats.com’;_goa=354450;
_got=2;_goi=2;_goz=0;_gol=’Free hit counter’;_GoStatsRun();

Free hit counter

Sebelumnya di tulisan ini saya telah membahas cara konfigurasi koneksi internet di Linux, khususnya Ubuntu (distro lain menyesuaikan ya…hehe), melalui mobile broadband. Dengan niat ‘membayar’ penyataan berikut

…Hubungkan ponsel Anda ke komputer dengan kabel data (konfigurasi dengan bluetooth akan berbeda lagi)…

maka pada tulisan kali ini saya akan membahasnya bagaimana menghubungkan ponsel ke komputer melalui fasilitas ‘gigi biru’ Berangkaaat…

:: Instal-instal dulu package-nya ::

Pastikan kelima paket di bawah ini terinstal dulu, bisa dari terminal dengan apt-get install, dari Synaptic, atau cari di situs http://package.ubuntu.com.

• wvdial
• libuniconf
• libwvstreams4.4-base
• libwvstreams4.4-extras
• libxplc0.3.13

Poin 2 sampai 4 adalah dependensinya paket wvdial.

:: Sunting-sunting deh file-nya ::

Sebelumnya, pastikan dulu bahwa ponsel dan komputer Anda telah berkenalan satu sama lain. Jangan lupa nyalakan bluetooth di keduanya (ya iyalah…). Biar yakin, cek dengan men-scan si ponsel melalui

hciconfig scan

.
‘Daftarkan’ ponsel Anda dengan cara memodifikasi isi file rfcomm.conf yang terdapat di /etc/bluetooth, nanti hasilnya kira-kira seperti ini:

rfcomm0 {
# Automatically bind the device at startup
bind yes;

# Bluetooth address of the device
device 00:1D:98:35:E9:AF;

# RFCOMM channel for the connection
channel 1;

# Description of the connection
comment "Dioni 6300";
}

Untuk bind, atur menjadi yes. Untuk mendapatkan alamat device jalankan perintah

hcitool scan

di terminal. Maka akan ditampilkan alamat dan nama ponsel Anda seperti ini…

Scanning ...
00:1D:98:35:E9:AF Dioni 6300

Sedangkan untuk mengetahui nomor channel, jalankan perintah

sdptool browse

atau lebih aman lagi jika Anda menyertakan alamat ponsel

sdptool browse 00:1D:98:35:E9:AF

untuk mengantisipasi kesalahan interpretasi jika terdapat lebih dari satu device yang terhubung ke komputer. Terminal akan menampilkan daftar servis pada ponsel beserta informasinya, contoh:

Inquiring ...
Browsing 00:1D:98:35:E9:AF ...
Service Name: Dial-up networking
Service RecHandle: 0x10000
Service Class ID List:
"Dialup Networking" (0x1103)
"Generic Networking" (0x1201)
Protocol Descriptor List:
"L2CAP" (0x0100)
"RFCOMM" (0x0003)
Channel: 1
Language Base Attr List:
code_ISO639: 0x656e
encoding: 0x6a
base_offset: 0x100
Profile Descriptor List:
"Dialup Networking" (0x1103)
Version: 0x0100

Service Name: Nokia PC Suite
Service RecHandle: 0x10001
Service Class ID List:
"Serial Port" (0x1101)
Protocol Descriptor List:
"L2CAP" (0x0100)
"RFCOMM" (0x0003)
Channel: 15
Language Base Attr List:
code_ISO639: 0x656e
encoding: 0x6a
base_offset: 0x100

Service Name: COM 1
Service RecHandle: 0x10002
Service Class ID List:
"Serial Port" (0x1101)
Protocol Descriptor List:
"L2CAP" (0x0100)
"RFCOMM" (0x0003)
Channel: 3
Language Base Attr List:
code_ISO639: 0x656e
encoding: 0x6a
base_offset: 0x100

Yang kita butuhkan adalah nomor channel untuk Dial-up networking. Pada contoh di atas diketahui Channel: 1, maka dapat dilihat pada rfcomm.conf pun diisikan channel 1.

File kedua yang perlu kita sunting adalah wvdial.conf di /etc/. Isikan parameter-parameter sesuai standardisasi operator Anda, misalnya saya memakai IM3 maka konfigurasinya sebagai berikut:

[Dialer Defaults]
Phone = *99#
Username = indosat@durasi
Password = indosat@durasi
New PPPD = yes
Dial Command = ATDT

[Dialer IM3]
Modem = /dev/rfcomm0
Baud = 115200
Dial Command = ATDT
Init2 = AT+CGDCONT=1,”IP”,”www.indosat-m3.net”
FlowControl = crtscts
Modem Type = Analog Modem
Stupid Mode = 1
New PPPD = yes

Informasi parameter operator GSM selain IM3 dapat Anda lihat di sini. Kini, sunting-menyunting file selesai sudah.

:: Jalankan, Gan ::

Ketikkan perintah wvdial nama-dialer di terminal. Misalnya untuk IM3:

wvdial IM3

Voila..jika koneksi berhasil, ini yang muncul…


--> WvDial: Internet dialer version 1.60
--> Cannot open /dev/rfcomm0: Input/output error
^CCaught signal 2: Attempting to exit gracefully...
--> Cannot open /dev/rfcomm0: Interrupted system call
--> Cannot get information for serial port.
--> Cannot open /dev/rfcomm0: Transport endpoint is not connected
root@diopulappie:/etc/ppp/peers# wvdial IM3
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: AT+CGDCONT=1,"IP","www.indosat-m3.net"
AT+CGDCONT=1,"IP","www.indosat-m3.net"
OK
--> Modem initialized.
--> Sending: ATDT*99#
--> Waiting for carrier.
ATDT*99#
CONNECT
dan seterusnya.

Selamat mencoba!

pake WVDIAL, install dulu wvdialnya kalau belum ada
# apt-get install wvdial
buat/edit file /etc/wvdial.conf, berisi
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2

selengkapnya…  

This configuration is valid for 1.56 and 1.60 version. Most common mistakes in configuring the dialer configurations are worked out.

NOTE:: The semicolon should be removed and append stupid mode =1 at the end of wvdial.conf. The /etc/ppp/pap-secrets and /etc/ppp/chap-secrets need to be modified only once, so dial as (root) for first time. You can run as normal user and lock the root account, it will give a permission denied error, its fine(stupid mode =1 will do the job)

wvdialconf – will detect the settings and edit the wvdial.conf.
wvdial – is the dialer.

Working::
$ wvdialconf /etc/wvdial.conf #run as root/normal user.

Check the wvdial.conf for the resolved modem and detected the initialization strings. ENCLOSURE:: wvdial.conf
# wvdial&; #run as root only for first time, push the job to background.

TUTorials::

• enable root: $ sudo passwd root (for debian users)
• disable root: $ sudo passwd -l root (for locking the account)
• job control: append ‘&’ at the end of the command, bring back by using fg or fg %n(process number, not PID) and press CTRL + C to safe exit.

* überprüfen ob Gerät vorhanden

~$ lsusb
…
Bus 004 Device 005: ID 0fce:d0cf Sony Ericsson Mobile Communications AB
…

* udev Regel-Datei /etc/udev/rules.d/50-md300.rules erstellen

~$ sudo vi /etc/udev/rules.d/50-md300.rules

ACTION!=”add”, GOTO=”3G_END”
BUS==”usb”, SYSFS{idProduct}==”d0cf”, SYSFS{idVendor}==”0fce”, PROGRAM=”/bin/sh -c ‘echo 3 >/sys/%p/device/bConfigurationValue’”
LABEL=”3G_END”

* /etc/init.d/udev restart

* Geräteknoten /dev/ttyACM{0,1} sollten erstellt worden sein

* Konfiguration für wvdial erstellen, dabei eigene PIN bei [Dialer pin] unter Init1 eintragen

~$ sudo vi /etc/wvdial.conf

[Dialer pin]
Modem = /dev/ttyACM0
Baud = 460800
Init1 = AT+CPIN=”xxxx”

[Dialer reset]
Modem = /dev/ttyACM0
Baud = 460800
Init1 = AT*E2RESET

[Dialer radio_on]
Modem = /dev/ttyACM0
Baud = 460800
Init1 = AT+CFUN=1

[Dialer radio_off]
Modem = /dev/ttyACM0
Baud = 460800
Init1 = AT+CFUN=4

[Dialer guthaben]
Modem = /dev/ttyACM0
Baud = 460800
Init1 = AT+CUSD=1,”*130#”,15

[Dialer swisscom]
Init1 = AT
Init2 = AT+CFUN=1
Init3 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init4 = AT+CGDCONT=1,”IP”,”gprs.swisscom.ch”
Modem Type = USB Modem
Baud = 460800
New PPPD = yes
Modem = /dev/ttyACM0
ISDN = 0
Phone = *99***1#
Password = gprs
Username = gprs

* Verbindung aufbauen mit

~$ wvdial pin swisscom

* Restguthaben abfragen mit

~$ wvdial guthaben

* Erneuter Verbeindungsaufbau nach Beenden von wvdial

~$ wvdial swisscom

Ref
http://fpreto.wordpress.com/2008/11/17/ubuntu-810-and-the-sony-ericsson-md300-modem/
http://www.sonyericsson.com/cws/download/1/356/327/1207040438/PC300_MD300_GSG_AT_Command_R2a_EN.pdf
http://en.wikipedia.org/wiki/Wvdial
http://de.wikipedia.org/wiki/Minicom
http://www.serial-port-monitor.com/
http://umtsmon.sourceforge.net/

[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2
Init3 = AT+CRM=1
Modem = /dev/ttyACM0
Phone = #777
Username = internet
Password = internet
BAUD = 230400
Stupid Mode = 1
ISDN = 0
Modem Type = USB Modem

For other Rest of the details on how to implement this go to Work With wvdial

[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2
Init3 = AT+CRM=1
Modem = /dev/ttyACM0
Phone = #777
Username = internet
Password = internet
BAUD = 230400
Stupid Mode = 1
ISDN = 0
Modem Type = USB Modem

For other Rest of the details on how to implement this go to Work With wvdial

Contoh configurasi wvdial untuk:

Koneksi TELKOMSEL

#vi /etc/wvdial.conf

isi:
[Dialer telkomsel-internet]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = AT+CGDCONT=1,IP,internet
Modem Type = Analog Modem
ISDN = 0
Phone = *99***1#
Modem = /dev/ttyUSB0
Username = wap
Password = ‘wap123′
Check Def Route = on
Baud = 9600

After a long search and trials, atlast I can now connect my pc to internet via aircel kerala connection. For this use the following procedure.

• Connect the phone (in my case Nokia E50) to the pc using data cable.
• Fire up the terminal and type sudo wvdialconf
• If it it says no modem found, try my old post.
• Download the wvdial.conf file and save it in the home folder.
• Backup the original wvdial.conf file by typing sudo mv /etc/wvdial.conf /etc/wvdial.conf.bkup1
• Now copy the newly downloaded wvdial.conf file to the /etc/ by typing sudo cp ~/wvdial.conf /etc/wvdial.conf
• To connect to internet type wvdial in terminal and wait for showing the ip addresses and dns addresses.
• Don’t forget to uncheck the tick mark in the browser showing offline browsing.

Esse tutorial serve para quem usa o Ubuntu 9.04 ou distro mais recente. O modem discado Conexant tem um bom suporte no Linux. O problema é que o driver feito pela Conexant é pago! Uma versão gratuita, limitada em 14,4 kbps é oferecida, mas que utilidade tem isso?

Felizmente, a Dell, que vende computadores e laptops com Ubuntu e usa esse modem, fornece a versão OEM, com velocidade de 56 kbps, de graça. Usaremos esse driver no nosso tutorial. Primeiro, devemos baixar o driver:

- Se sua distro é o Ubuntu 9.04, Mandriva 2009, Fedora 11 ou qualquer outra bem recente, use esse pacote.

- Se sua distro é o Ubuntu 8.04, ou versões mais antigas de outras distros, procure o pacote aqui.

Com o pacote em tar.bz2 baixado, primeiro devemos tratar algumas dependências, que são os pacotes fakeroot e buid-essentials. No Ubuntu, esse pacotes estão no CD de instalação. Com o CD no drive, vá em “Sistema > Administração > Canais de Software” e marque a opção “CD do Ubuntu 9.04″.

Para instalar os pacotes, abra o Synaptic (“Sistema > Administração”) e clique em “Recarregar”. Um erro irá aparecer, mas é só porque você está sem internet. Instale os pacotes citados acima, todos serão obtidos do CD.

Com o caminho pronto, descompacte o arquivo do driver e use os seguintes comandos em um terminal:

$ cd caminho_para_a_pasta_do_driver

(use a tecla TAB para ele adivinhar o resto do comando, assim você digita menos )

$ sudo touch /etc/.hsfmodem-hda-disable

$ sudo make install

(instala tudo)

$ sudo hsfconfig

Com o último comando, algumas perguntas serão feitas. Deixe tudo em branco e vá confirmando com ENTER. Agora, o driver já está instalado, falta apenas um discador. Baixe os seguintes pacotes e instale clicando neles, nessa ordem.

libuniconf

libwvstreams4.4-base

libwvstreams4.4-extras

wvdial

gnome-ppp

Com isso, o discador Gnome PPP estará disponível no menu Internet. Preencha os dados de seu provedor (ou use o IG com nome de usuário “ig” e número “17001000″) e basta discar.

Espero que tenha solucionado seus problemas, até a próxima.